• 제목/요약/키워드: 촬상소자

검색결과 13건 처리시간 0.027초

Color Capture Device의 저조도 감도 향상 방안 (Sensitivity Improvement Method for Color Capture Device At Low Illumination Conditions)

  • 김일도;전재성;최병선;박상규
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2007년도 하계종합학술대회 논문집
    • /
    • pp.235-236
    • /
    • 2007
  • CCD(Charge-Coupled Device) 혹은 CMOS (Complementary Metal Oxide Semiconductor)와 같은 소자를 이용하여 빛을 전기적 신호인 Image로 재구성하는 촬상소자(Color Capture Device)는 촬영환경이 어두워지면 Dynamic Range가 작아지고, Noise가 상대적으로 심해진다[1][2]. 본 논문에서는 촬영 환경이 어두울 때, Resolution을 Preserving하는 Pixel Pitch가 큰 촬상 소자와 Motion Blur를 억제하는 Exposure Time이 긴 촬상 소자의 조합을 신호처리로 구현하여, 신호의 Power를 향상시켜 Dynamic Range를 키우고 Noise의 Boost-up을 억제하여 SNR(Signal to Noise Ratio)을 향상시키는 방식으로, 촬상 장치의 감도를 향상시켜 화질을 개선하는 방법을 제안한다.

  • PDF

반사형 디지털 홀로그래피 현미경 시스템에서 촬상소자의 유효기록 가능영역과 재생영역에 대한 연구 (Effective Area in CCD and Reconstruction Area in the reflection type Digital Holography microscope system)

  • 최규환;김성규
    • 한국광학회:학술대회논문집
    • /
    • 한국광학회 2008년도 하계학술발표회 논문집
    • /
    • pp.169-171
    • /
    • 2008
  • 마이켈슨 간섭계 시스템에 두 개의 Convex Lens를 추가함으로서 평면파 참조광을 유지 시키며, 물체에 조사되는 물체광의 조사면적을 변화시킬 수 있는 새로운 형태의 마이켈슨 간섭계를 제작 하였다. 새로운 형태의 마이켈슨 간섭계를 반사형 디지털 홀로그래피 현미경 시스템(Digital Holography Microscope System)에 적용하여 촬상소자(CCD: Charge Couple Device)에 홀로그램 기록 시 기록 가능한 CCD의 유효 영역과 재생 가능 영역에 대해 연구를 하였다

  • PDF

고배율 줌 광학계의 상면 오차 보정 방법 (Focus-adjustment Method for a High-magnification Zoom-lens System)

  • 유재명
    • 한국광학회지
    • /
    • 제34권2호
    • /
    • pp.66-71
    • /
    • 2023
  • 줌 렌즈는 이제 휴대폰에도 적용되기 시작했다. 휴대폰에 적용되는 줌 렌즈는 주로 망원 영역을 촬영하기 위해 적용되고 있으며, 이러한 광학계는 고배율 줌 광학계와 유사하게 초점거리가 길어서 부품의 제작 오차에 의한 촬상 소자의 위치도 크게 변한다. 이를 보정하기 위해 기존에는 렌즈군 1군과 광학계 전체를 이동해서 촬상 소자의 위치 변화를 보정했으나, 본 논문에서는 이동하는 렌즈군 2개를 임의로 선택해서 촬상 소자의 위치를 보정할 수 있음을 확인했다. 다만, 이를 위해서는 이동하는 렌즈군 앞쪽과 뒤쪽으로 간격을 더 확보해야 함을 알 수 있었다.

깊은 공핍층을 가지는 우주항공용 촬상소자의 3 차원 특성 분석 (Three-Dimensional Characterizing Analysis of Astronomic CCDs with a deep depletion)

  • Kim, M. H.
    • 한국광학회:학술대회논문집
    • /
    • 한국광학회 2000년도 하계학술발표회
    • /
    • pp.228-229
    • /
    • 2000
  • Buried channel JET-X CCDs (Joint European X-ray Telescope Charge Coupled Devices: EEV CCD12) with a deep depletion have been analyzed to provide an optimized condition for a charge storage and transfer. A maximum charge capacity has been found for the supplementary narrow channel by considering the potential distribution as a function of a mobile charge. Analysis for the depletion edges of JET-X CCDs have been successfully performed, showing good agreement with the depths estimated from X-ray detection efficiency measurements [1]. (omitted)

  • PDF

Holography 기술

  • 박재형
    • 정보와 통신
    • /
    • 제28권6호
    • /
    • pp.31-38
    • /
    • 2011
  • 본고에서는 홀로그래피 기술을 알아본다. 홀로그래피 기술은 파동 광학에 기초하여 빛의 크기뿐만이 아니라 위상까지 촬영하고 재생할 수 있는 기술이다. 특히 최근 촬상 소자와 광변조소자의 발달로 홀로그래피의 디지털 방식으로의 촬영, 처리, 재생이 가능해 지면서 이를 응용한 다양한 홀로그래피 기술들이 개발되고 있다. 본 고에서는 이 중에서 3차원 촬영 및 3차원 디스플레이에 응용되고 있는 홀로그래피 기술을 중심으로 알아본다.

LNG 탱크의 주름진 내벽박판용 자동용접시스템의 개발에 관한 연구 (A study on development of automatic welding system for corrugated membranes of the LNG tank)

  • 유제용;유원상;나석주;강계형;한용섭
    • Journal of Welding and Joining
    • /
    • 제14권1호
    • /
    • pp.99-106
    • /
    • 1996
  • Development of an automatic TIG welding system incorporating a vision sensor and torch control mechanism leads to an improved welding quality and greater production efficiency. The automatic welding system should be greatly restricted in its size and weight for the LNG(Liquefied Natural Gas) storage tank and also provide a unique torch rotating mechanism which keeps the torch tip in the constant position while the angle is changed continuously to maintain the welding torch substantially perpendicular to the weld line. The developed system is driven by two translation axes X, Z and one rotational axis. A moving line window method is adopted to the image recognition of the corrugated membranes with specular reflection. This method decides original laser stripe patterns in image which is affected by multi-reflection. A self-teaching algorithm, which guides the automatic welding machine with the information provided by the CCD camera without any previous learning of a reference trajectory, was developed for tracking the corrugated membrane of the LNG tank along the weld line.

  • PDF

촬상소자를 이용한 맥동의 2차원 계측 (2-dimensional Measurement of Arterial Pulse by Imaging Devices)

  • 김기왕
    • 대한한의진단학회지
    • /
    • 제12권2호
    • /
    • pp.8-17
    • /
    • 2008
  • Objectives: For the traditional pulse diagnosis in Oriental Medicine, not only the pulse shape in time domain, but the width, length and depth of arterial pulse also should be measured. However, conventional pulse diagnostic systems have failed to measure the spatial parameters of the arterial pulse e.g. effective length of arterial pulse in the wrist. In fact, there are many ways to measure that kind of spatial features in arterial pulsation, but among them, the method using image sensor provides relatively cheap and simple way, therefore I tested feasibility of measuring 2-dimensional pressure distribution by imaging devices. Methods: Using widely used PC cameras and dotted balloons, the subtle oscillation of skin over the radial artery was recorded continuously, and then the displacement of every dot was calculated. Consequently, the time course of that displacements shows arterial pulse wave. Results: By the proposed method I could get pressure distribution map with 30Hz sampling rate, 21steps quantization resolution, and approximately 1mm spatial resolution. With reduced quantization resolution, $3cm{\times}4cm$ view angle could be achieved. Conclusion: Although this method has some limitations, it would be useful method for detecting 2-dimensional features of arterial pulse, and accordingly, this method provides a novel way to detect 'narrow pulse', 'wide pulse', 'long pulse', 'short pulse', and their derivatives.

  • PDF

플로팅 시스템이 적용된 카메라 광학계의 공차 분석 (Tolerance Analysis Method of Camera Optics Using Floating System)

  • 손현준;유재명;조재흥
    • 한국광학회지
    • /
    • 제33권6호
    • /
    • pp.303-309
    • /
    • 2022
  • 최근에 광학계에서 사용하는 촬상 소자의 화소 크기가 점차 작아지고 있기 때문에 광학계의 해상력 규격은 점차 높아지고 있다. 기존의 방법에서는 특정 렌즈군의 편심에 따른 수차 변화가 발생할 때, 광학계의 수차가 어느 정도 최소화되도록 특정 렌즈군의 편심량을 계산하는 방법으로 광학계의 해상력을 높여서 고화소의 광학계의 촬상 소자에 대응한다. 다만 기존의 방법은 특정 렌즈군의 편심에 따른 다른 특정 수차의 변화가 없어야 한다는 조건이 있다. 본 논문에서는 이러한 제한 없이 플로팅 시스템이 적용된 카메라 광학계에서 임의로 두 개의 렌즈군을 선택해서 편심을 조절함으로써 카메라 광학계의 해상력을 높이는 새로운 방법을 제안하고자 한다.

홀로그래픽 TV 방송 시스템 구현을 위한 기술적 고려 요소 (Technical Considerations for Design and Implementation of the Digital Holographic TV Broadcasting System)

  • 김재한;문경애;추현곤;최진수;김진웅
    • 한국방송∙미디어공학회:학술대회논문집
    • /
    • 한국방송공학회 2015년도 하계학술대회
    • /
    • pp.441-443
    • /
    • 2015
  • 디지털 홀로그래픽 TV 시스템을 구현하려면 홀로그래픽 정보 획득 장치가 필요한데, 해상도 한계 때문에 홀로그램의 프린지 패턴을 상용 촬상 소자로는 직접 기록할 수 없다. 이를 극복하는 방법으로는 컬러 영상과 거리영상 정보를 얻은 후에 압축을 거쳐 수신 디스플레이단에 전송하고 이 정보로부터 3차원 모델을 형성한 후에 컴퓨터 생성 홀로그램을 생성하고 이를 회절소자를 이용하여 디스플레이하는 방법이 현재로서는 현실적인 방법이 될 것이다. 홀로그래픽 디스플레이에서는 회절소자인 공간광변조기 성능의 한계 때문에 기존 2DTV와 같은 수준의 디스플레이 구현은 매우 어렵다. 기존 공간광변조기는 픽셀피치가 커서 시야각이 매우 좁으나, 픽셀 크기를 작게 하는 동시에 공간광변조기 면적을 크게 하기에는 기술적인 어려움이 많다. 본 논문에서는 홀로그래픽 TV를 구현하는데 있어서 기술적으로 극복하고 고려해야 할 주요 요소에 대하여 분석한다.

  • PDF

무선 WiGig 전송 연구 (Generation of Forensic Evidence Data from Script)

  • 최상현;박대우
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국정보통신학회 2017년도 추계학술대회
    • /
    • pp.356-359
    • /
    • 2017
  • 교육부의 운영계획에 따라서 학교당 1~2개 교실에 전자칠판(IWB, Interactive White Board)이 보급되었다. 따라서, 두상투영기(OHP, Overhead Projector)와 스크린 대신에 실물화상기와 전자칠판이 그 역할을 대신하게 되었다. 하지만 촬상소자와 디스플레이 장치의 발전 속도를 따라가지 못하고, 활용도가 떨어지는 경우가 많았다. 본 연구에서는 스마트폰의 카메라를 이용하여 고해상도의 이미지를 획득할 수 있도록 연구한다. 획득한 고해상도의 이미지를 전자칠판이나 대형 TV로 무선 통신으로 지연시간 없이 전송할 수 있도록 와이기그(WiGig, Wireless Gigabit) 기술을 이용한다. 또한 스마트폰 카메라에 넓은 화각(FOV, Field of View)의 렌즈를 탑재하여 출시하는 것에 반하여, 현미경 렌즈를 이용하여 스마트폰으로 특정 부분을 400배까지 확대하여 관찰할 수 있도록 한다. 본 연구결과로 교육 및 연구 현장에서 실시간 400배 확대의 활성화 자료로서 사용될 것이다.

  • PDF