• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.5
• /
• pp.773-779
• /
• 2022

Deep-sea fisheries in Korea play an essential role in supplying popular seafood and providing food security. Countries, as well as the IMO (International Maritime Organization), have attempted to establish an internationally harmonized safety standard for fishing vessels. However, starting with the adoption of 'The Torremolinos International Convention for the Safety of Fishing Vessel 1977', the '2012 Cape Town Agreement' was adopted, but the requirements for enforcement were not met. However, with the 2019 Torremolinos Declaration, the effect of the agreement became visible. Korea is also about to ratify the agreement, and deep-sea fishing vessels are subject to the agreement. The length of the hull or the gross tonnage can be selected as the criteria for applying the 2012 Cape Town Agreement, and this is also partially applied to the existing vessels. Analyzing 188 deep-sea fishing vessels registered as members of the Korea Overseas Fisheries Association to confirm the effect on the existing vessels showed that the application of gross tonnage had little impact on the ratification of the agreement. In addition, laws must be revised for the compulsorization of GMDSS facilities such as two-way VHF and radar transponders and for the safety familiarization of fishermen. In the industry, the facilities required by the agreement must be provided, and the fishermen must be familiarized with safety.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2006.11a
• /
• pp.327-328
• /
• 2006

중 저준위방사성폐기물(이하, '방폐물'이라 함)을 처분시설로 안전하고 효율적으로 운반하기 위하여 원자력법[1][2] 및 IAEA 안전운반규정(3) 등 국내외 관련규정의 기술기준을 만족시키는 안전성이 확보된 운반용기를 사용하여야 한다. 방폐물이 저준위비방사능(LSA: Low Specific Activity)물질 또는 표면오염물체(SCO; Surface Contaminated Object)로 분류되고 전용상태로 운반되는 경우는 거의 IP-2형 운반용기를 이용하여 운반하는 것이 가능하다. 방폐물 처분시설이 경주의 임해지역에 건설되어 운영된 것이므로 일부를 제외한 대부분의 방폐물은 IP-2형 운반용기에 적재하여 전용선박을 이용하여 해상으로 운반하게 된다. 전용선박은 크레인을 이용하여 화물을 선적하고 하역하는 Lo/Lo(Lift-on/Lift-off) 방식으로 IMO 규정 및 국내 선박법에 따라 국내에서 설계, 건조될 예정이며, 선박의 규모는 총 톤수 약 2,000톤이며, 약 1,600드럼의 방폐물을 적재할 수 있다. 여기서는 방폐물의 해상운반을 위한 IP-2형 운반용기에 대한 요건 및 관련규정에 따른 기술기준을 입증하기 위한 건전성 평가방안에 대하여 기술하였다.

• Proceedings of KOSOMES biannual meeting
• /
• 2003.11a
• /
• pp.13-21
• /
• 2003

Ships if 500 gross tonnage and upwards constructed on or after 1 July 2002 shall have an automatic tracking aids according to SOLAS V /19 but existing ships less than 10,000 gross tonnage constructed before 1 July 2002 have potential collision risks due to the lack of automatic plotting devices like as an ATA This paper aims to provide a homemade ATA by developing the tracking algorithm for ATA and to prevent collision incidents by distributing ATA system to coasters.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.9 no.2
• /
• pp.5-13
• /
• 2003

Ships of 500 gross tonnage and upwards constructed an or after 1 July 2002 shall have an automatic tracking aids according to SOLAS V/19 but existing ships less than 10,000 gross tonnage constructed before 1 July 2002 have potential collision risks due to the lack of automatic plotting devices like as an ATA. This paper aims to provide a homemade ATA by developing the tracking algorithm for ATA and to prevent collision incidents by distributing ATA system to coasters.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.40 no.1
• /
• pp.17-22
• /
• 2004

This study was carried out at the CWC of Chosun university for the purpose of resistance performance improvement of planing hull, and the results of the tests were confirmed cooperatively with WJFEL. G/T 100 ton class planing hull form was selected, and the improvement of hull form including appendages were performed by using some model test techniques. The model test scope comprises resistance relative tests including wave profile observation, trim and sinkage measurement and flow visualization tests at full load and trial conditions for one bare hull and for two appended hulls. The final wedge and spray strip combined with improved hull form showed about 1.0 knot speed improvement at both of full and trial conditions, and outstanding improvement for fore wave phenomena.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2003.05a
• /
• pp.245-250
• /
• 2003

Hull form development and Anti-rolling tank of G/T 360ton class fishery patrol ship was carried out in the CWC at Chosun university, cooperatively with WJFEL(The West Japan Fluid Engineering Laboratory). Same size of 15 knots class fishery patrol ship was selected as a parent form(Model number: CU-015), and modified fore and after body hull form under the slightly lengthened to be suitable for the operation at 20 knots. This paper investigated for a rolling performance and an effective using method when fishery patrol ship was equipped with anti-rolling tank. On several occasions of rolling test was made reference to design data of a similar ship. Although the hull form was highly constrained in being limited to modification of a parent hull form, significant wave resistance improvement was made.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.6
• /
• pp.652-660
• /
• 2017

Recently, the number of tourists using cruise ships in Korea is increasing. and an big cruise ship with an gross tonnage of 160,000 tons or more has entered the domestic ports. Therefore, the government has been making a lot of efforts to confirm the cruise infrastructure for revitalization of the domestic cruise industry. However, there are no standards for cruise ship specifications and water facilities in the domestic port and fishery design standards. Currently, construction of dedicated cruise facilities is under way in major domestic ports. However, due to lack of specifications and domestic standards for cruise ships, it is difficult to design and license special facilities. Therefore, in this study, PIANC rule and domestic harbor and designing standard of fishing port were compared and analyzed in order to present the standard specification of cruise ships. And analyzed the representative linearity of cruises currently being operated. As a result of the ship characteristics analysis, There was a difference in coastal passenger ship in specifications and ship maneuverability. Therefore, in order to design facilities dedicated to cruising, the specifications of the target ship must be included in the domestic design standard. In addition, in order to calculate the scope of the target ship, I applied the coverage rate of 75% to the average specification value of the cruise ship and presented the standards of the cruise ship and the standard of the water area facilities.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.1
• /
• pp.74-80
• /
• 2021

When a berth is built close to a fairway, a moored vessel will be affected by the ship waves generated by navigating vessels. In this study, a portable measurement system was developed to measure the roll motion of an actual vessel, and the results were compared with simulation results. The simulation results showed that the roll motion satisfies the loading safety criteria. However, the actual results of the vessel, did not satisfy the criteria in some cases. In this study, 18 cases that did not satisfy the loading safety criteria were analyzed. Among these cases, three cases were affected by a different time zone of the remaining 15 cases, 11 cases (73.3%) were observed to be consistent with arrival times of passenger ships of more than 10,000GT sailing between in Mokpo and Jeju. The results of this study can be used to reflect marine traffic characteristics in the assessment of loading safety, which can increase the reliability of results of the loading safety assessment of ships.

• The Journal of the Korea Contents Association
• /
• v.21 no.3
• /
• pp.454-462
• /
• 2021

The purpose of this paper is to compare and analyze the status of ship departures by major ports in Korea. To this end, we collected necessary data from the National Statistical Office (National Statistical Portal), "Transportation·Logistics ⇨ Ship Departure Status by Port". The analysis period is 141 months from January 2009 to September 2020. The increase rate was higher in the order of Yeosu, Pyeongtaek Dangjin, Gwangyang, Busan, Incheon and Ulsan. In the analysis of the rate of change, Yeosu showed an uptrend while other ports showed a modest downtrend. In the scatter analysis, the total ship departure shows a high degree of synchronization with other ports except Yeosu. As a result of the empirical analysis, the recent trend of ship departures is slowly falling below 0%, and the current movement is expected to continue for the time being. As the southern logistics of China and ASEAN and northern logistics of Eurasia become active, the role of major ports is expected to expand further. It is necessary to develop a differentiated logistics service for each port and find an efficient way to increase the volume of goods by deriving factors for improving logistics.

• 선박안전기술공단연구보고서
• /
• s.1
• /
• pp.1-146
• /
• 2007

본 연구의 목적은 STS 304 프로펠러축의 육성가공 및 STS 630 프로펠러축의 열 가공에 따른 강도 및 내식성 등의 재질특성변화 등을 조사 분석하여 선박기관기준 제8조 제2항에서 규정하고 있는 ‘용접수리 불가’에 대한 근거자료 제시(동조동항의 단서조항에 대해서는 일반적으로 알려진 스테인리스강의 용접에 대한 적정방법 이외에 연구결과를 바탕으로 적정 기준을 제시할 수 있는지에 대한 부분도 동시에 검토 하고자 함)는 물론, 선박기관기준 제65조 제1호(총 톤수 20톤 이상의 경우는 제59조 제1항 적용)에서 규정하고 있는 석출경화계 스테인리스강의 제1종축으로써의 인정 여부에 대한 유효성을 제시하여 프로펠러축의 가공(육성․열)과정에 필요한 기본 방향을 제시하고자 함. 따라서 본 연구에서는 STS 304, STS 630 프로펠러축의 가공에 따른 결과를 바탕 으로 위에서 언급한 사항들에 대한 근거자료 확보 및 프로펠러축의 가공에 따른 방향을 제시하기 위한 일환으로 ‘스테인리스강 프로펠러축의 가공에 따른 재질 특성에 관한 연구’를 실시함으로써 프로펠러축 검사와 관련한 평가 기준 정립의 근본적인 지침 자료를제시하고자 함. 또한 본 연구과제는 스테인리스강 프로펠러축에 대한 가공(육성․열) 특성을 살펴 봄으로써 기존에 이미 발표된 판 형태의 스테인리스강 용접에 대한 연구와는 다소 구별되는 과제일 뿐만 아니라 단순한 스테인리스강의 용접특징을 나타낸 실험들과는 다르게 스테인리스강 프로펠러축에 대한 특징들을 분석하고 평가함으로써 현장중심의 연구가 될 수 있도록 하였음. 이번 연구의 결과는 일반적으로 알려진 스테인리스강의 용접관련 특성들을 통해어느 정도의 결과 추정은 가능하나 앞에서 언급한 기준들에 대한 구체적인 근거자료를 확보하여 필요시 적절하게 활용할 수 있는 자료가 될 수 있도록 하고자 하였음.