• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2006.11a
• /
• pp.91-94
• /
• 2006

The way to shorten a construction period is considered to an very important technology development element as reducing the formwork removal periods with promoting strength revelation own concrete. This study executed experiment to review usability of early strength revelation chemical admixture which is judged in ways effective with premature removal of form about concrete. Use of early strength revelation AE water reducin admixture is apperaing so that strength revelation by early hydration promotions is excellent. The results of being applied proposed work process are that compressive strength are appeared more than 5MPa within 16 hours so that removal of vertical form was possible. the concrete compressive strength satisfied with a more than 2/3 of specified concrete strength for removal of horizontal form are appeared in 42 hours of 27 MPa proportioning strength, in 36 hours of 30, 35 MPa proportioning strength so that the 6 days cycle time of concrete structural frame work is cut by 2 days as shortening delayed period in works of removing slab forms. So construction cost reductions and a construction period shortening are judged so that it is possible.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.1 no.3
• /
• pp.211-218
• /
• 2013

Cyclic wet and dry conditions in the marine environment structures corrosion is known to be the fastest rising. For that reason, accelerated corrosion test methods for the reproduction of tidal environment has been actively conducted. However, many studies have estimated threshold value for steel corrosion or concentrated in chloride penetration analysis. In this study, cyclic wet and dry conditions to reproduce the structure of the environment in accelerated corrosion and chloride penetration test analysis was performed. Corrosion was determined by the result of reinforcement corrosion monitoring based on galvanic potential measurement and half-cell potential method. Accelerated corrosion test results for each formulation was different corrosion periods, the order OPC> FA> BS> High-strength concrete. FEM durability interpretation program DuCOM was conducted under the same conditions as in accelerated corrosion test. The experimental RCPT tests demonstrated the validity of the result.

• Journal of Ocean Engineering and Technology
• /
• v.14 no.3
• /
• pp.66-71
• /
• 2000

The main objectives of this study are to carried out in order to evaluate strength development of Fly Ash concrete containing various amounts of Fly Ash such as 0%, 10%, 20% and 30%. The experimental variables included in this test program consist of content of Fly Ash, concrete strength and chemical activation. As Fly Ash increases, air content, strength development of concrete and slump loss of normal strength concrete were gradually decreased. The inclusion of Na$_2$SO$_4$increased the short-term strength of concrete that contains Fly Ash. In addition, the strength development of concrete that contains Fly Ash and Na$_2$SO$_4$were improved.

• Applied Biological Chemistry
• /
• v.19 no.2
• /
• pp.75-81
• /
• 1976

High ionic strength is expected to enhance dissociation of Ca-DPA from spores and to contribute to a detrimental effect on spore stability or on spore heat resistance with a combined treatment of gamma-radiation. From this study, this hypothesis has become apparent as as follows; 1) Ca-DPA dissociation contributes to loss of stability of bacterial spores with respect to heat resistance, survival during storage, and 2) the cytoplasmic membrane plays a role in maintaining the stability of DPA-Ca-spore complex, apparently by serving as a permeability barrier.

• Journal of dental hygiene science
• /
• v.14 no.2
• /
• pp.101-106
• /
• 2014

In this study, we investigated the proliferative and adhesional effect of human osteoblast like MG-63 cell treated with low intensity pulsed ultrasound (LIPUS). We tested the effectiveness of LIPUS in human osteoblast like MG-63 cells. Cell proliferation was measured using a water soluble tetrazolium salts-1 assay. The mRNA expression of alkaline phosphate, vascular endothelial growth factor (VEGF), integrin alpha 2, colla 1A1 were performed by reverse transcription-polymerase chain reaction. LIPUS was no cytotoxicity in human osteoblast like MG-63 cells. In addition, the data show that treatment with 1 MHz and 3 MHz LIPUS on increased proliferation 7 days after. There were significant increased in mRNA expression of alkaline phosphatase, osteocalcin, VEGF, integrin alpha 2 and colla 1A1 (p<0.05). Therefore, the LIPUS significantly increased differential expression of mRNA levels in osteoblast like MG-63 cell and new possibilities in dental clinical practice.

• Journal of the Korea Concrete Institute
• /
• v.29 no.4
• /
• pp.407-413
• /
• 2017

The fundamental property of magnesia phosphate cement (MPC) for concrete repair material was investigated in this research. For mechanical properties, setting time, compressive strength and tensile/flexural bond strength were measured, and hydration products were detected by X-ray diffraction. The specimens were manufactured with dead burnt magnesia and potassium dihydrogen phosphate was admixed to activate the hydration of magnesia and a borax was used as a retarder. To observe the pore structure and ionic permeability of MPC mortar, mercury intrusion porosimetry was performed together with rapid chloride penetration test (RCPT). As a result, time to set of Fresh MPC mortar was in range of 16 to 21 min depend on the M/P ratio. Borax helped delaying setting time of MPC to 68 min. The compressive strength of MPC with M/P of 4 was sharply developed to 30 MPa within 12 hours. The compressive strength of MPC mortar was in range of 11.0 to 30.0 MPa depend on the M/P ratio at 12 hours of curing. Both tensile and flexural bond strength of MPC to old substrate (i.e. MPC; New substrate to OPC; Old substrate) were even higher than ordinary Portland cement mortar (i.e. [OPC; New substrate] to [OPC; Old substrate]) does, accounting 19 and 17 MPa, respectively. The total pore volume of MPC mortar was lower than that of OPC mortar. MPC mortar had the entrained air void rather than capillary pore. The RCPT showed that total charge passed of OPC mortar had more than that of MPC mortar, which can be explained by the pore volume and pore distribution.

• Journal of the Korea Institute of Building Construction
• /
• v.20 no.5
• /
• pp.391-397
• /
• 2020

This study is to compare and analyze the strength, drying shrinkage and carbonation properties of lightweight aggregate mortar using recycling water as prewetting water and mixing water. The flow, compressive strength, split tensile strength, drying shrinkage and carbonation depth of lightweight aggregate mortar with recycling water were measured. As test results, the mortar flow was similar in all mixes regardless of the recycling water content. The compresseive strength of the RW5 mix with 5% recycling water as prewetting water and mixing water was the highest value, about 53.9 MPa after 28 days. In addition, the tensile strength of lightweight mortar was about 3.4 to 3.8 MPa, indicating 7 to 9% of the compressive strength value regardless of recycling water content. In the case of drying shrinkage, the RW2.5 mix using 2.5% recycling water showed the lowest shrinkage rate as about 0.107% at 56 days. The drying shrinkage of the plain mix without recycling water was relatively higher than the RW2.5 and RW5 mix. The RW5 mix showed lowest carbonation depth compared to other mixes. In this study, the RW5 lightweight aggregate mortar with 5% recycling water exhibits excellent compressive strength and carbonation resistance. Therefore, it is considered that if the recycling water, a by-product of the concrete industry, is properly used as prewetting water and mixing water of lightweight mortar and concrete, it will be possible to increase the recycling rate of the by-product and contribute to improve the property of lightweitht aggregate mortar and concrete.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2001.04a
• /
• pp.158-158
• /
• 2001

산업용 포장재의 주원료로서 이용되고 있는 국산골판지고지(KOCC)는 반복적인 재활용 으로 인하여 섬유장이 짧고 매우 각질화된 상태이며, 펄프 내 미세분 함량이 50%이상에 달 하고 있다. 또한 섬유의 표면이 인쇄잉크, stickies 및 각종 이물질로 오염됨에 따라, 섬유자 체가 보유하고 있는 섬유간 결합 능력이 저하된 상태이다. 국산 골판지 고지를 재활용한 골판지 원지의 생산 시 탈수성 및 강도 저하의 단점을 극 복하는 것은 생산성과 품질향상의 측면이외에 고지 재생을 촉진시킨다는 의미를 지니고 있다. 상기한 KOCC의 단점을 극복하는 방안으로 섬유분과 미세분의 적절한 분급을 통하여 초지 시 탈수저향을 감소시키고 더불어 종이의 강도를 개선하는 방안이 본 연구센터에 의해 고안되었다. 아울러 고온압착건조 처리를 활용한 종이의 물성 개선법이 국내에 이미 적용된 상태로 건조시간의 단축 및 종이의 제반물성을 개선시켜주게 되었다. 하지만 이미 열화된 KOCC에 고온압착건조 처리를 적용하여 밀도를 증가시킨다 할지라 도 천연의 UKP를 이용한 종이에 준 하는 강도를 얻는 데에 한계가 있었다. K KOCC 펄프의 섬유간 결합 능력을 개선시키기 위하여 본 연구에서는 Kneading처리와 지력증강제를 첨가를 함께 실시하는 방안을 검토하였으며, 고온압착건조된 골판지 원지의 표면에 코팅처리를 실시하여 그 효과를 분석하였다. 이를 통해 국산 골판지고지를 재활용한 골판지원지의 강도 극대화 방안을 탐색하고자 하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.2
• /
• pp.1541-1548
• /
• 2015

In this study, strengthening methods of floor surface finishing mortar are investigated to prevent the cracks using crack inhibitor agents, water reducer agent and resin. As a results, The number of crack and compressive strength of the specimen containing water reducer agent or resin had more effective than other specimens containing inhibitor agents at 7 days. And the highest compressive strength specimen showed the relatively no crack, but the lowest compressive strength specimen showed a lot of crack. Therefore the relationship between the crack growth and the compressive strength had proportional connection. A base on the mock-up test, long-term monitoring of the on-site applied to mixing design type3 showed the few cracks.

• Applied Chemistry for Engineering
• /
• v.8 no.5
• /
• pp.822-829
• /
• 1997

When $Al_2(SO_4)_3$ as an accelerator was added to $\beta$-hemihydrate gypsum, the setting time, mobility and compressive strength properties of $\beta$-hemihydrate gypsum were examined with the adding of two types grounded gypsum crushed by ball mill. By 15wt% adding of 7% $Al_2(SO_4)_3$ dilute solution, the setting time of $\beta$-hemihydrate gypsum was sharply accelerated than that of non-added $\beta$-hemihydrate gypsum. When ground phospho gypsum(PG) and chemical gypsum(CG) were added to $\beta$-hemihydrate gypsum, the initial and final setting time of $\beta$-hemihydrate gypsum were accelerated markedly with the increasing of grinding time and added amount of ground phospho gypsum. Especially, this trend largely presented when ground phospho gypsum was added to $\beta$-hemihydrate gypsum. The compressive strength of $\beta$-hemihydrate gypsum added by ground phospho and chemical gypsum was largely increased at initial curing time such as 1, 3 days. Particularly, the compressive strength of $\beta$-hemihydrate gypsum added by ground phospho gypsum was increased by 15~20% than that of ground chemical gypsum.