• Korean Chemical Engineering Research
• /
• v.50 no.3
• /
• pp.442-448
• /
• 2012

The effects of zeolite-type catalysts addition on the thermal decomposition of the PP resin have been studied in a thermal analyzer, a Pyrolyser GC-mass, and a small batch reactor. The zeolite type catalysts tested were natural zeolite, used FCC catalyst, and ZSM-5. As the results of TGA experiments, the pyrolysis starting temperature for PP varied in the range of $330{\sim}360^{\circ}C$ according to the heating rate. Addition of the zeolite type catalysts in the PP resin increased the pyrolysis rate in the order of used FCC catalyst> natural zeolite> ZSM-5 > PP resin. Adding the used FCC catalyst in the PP reduced most effectively the pyrolysis finishing temperature. In the PY-G.C. mass experiments, addition of zeolite type catalysts decreased the molecular weight of pyrolyzed product. In the batch system experiments, the mixing of used FCC catalyst enhanced best the initial yield of fuel oil, but the final yield of fuel oil was 2% higher in the case of mixing of natural zeolite. Also in the carbon number analysis, used FCC catalyst was the most useful one in this experiments for fuel oil.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.3
• /
• pp.330-336
• /
• 2005

The ozone injection method was proposed to improve the catalytic process for the removal of nitrogen oxides ($NO_x$). Nitric oxide (NO) in the exhaust gas was first oxidized to nitrogen dioxide ($NO_2$) by ozone produced by dielectric barrier discharge, and then the exhaust gas containing the mixture of NO and $NO_2$ was directed to the catalytic reactor where both NO and $NO_2$ were reduced to $N_2$ in the presence of ammonia as the reducing agent. A commercially available $V_2O_5-WO_3/TiO_2$ catalyst was used as the catalytic reactor. The $NO_2$ content in the mixture of NO and $NO_2$ was changed by the amount of ozone added the exhaust gas. The effect of reaction temperature, initial $NO_x$ concentration, feed gas flow rate, and ammonia concentration on the removal of $NO_x$ at various $NO_2$ contents was examined and discussed. The increase in the content of $NO_2$ by the ozone injection remarkably improved the performance of the catalytic reactor, especially at low temperatures. The present ozone injection method appears to be promising for the improvement of the catalytic reduction of $NO_x$.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.9 no.4
• /
• pp.1-8
• /
• 2005

An experimental investigation of a microthruster that uses hydrogen peroxide as a monopropellant is described. The study comprises of preparation method of silver as a catalyst and performance evaluation of a mesoscale reactor. Reduction of silver in $H_2\;at\;500^{\circ}C$ resulted in the best reactivity of all the treatment method tested. A mesoscale reactor was built to find the optimum configuration for full decomposition of propellant. The catalyst bed was made of a glass wafer substrate sputtered with silver and had a length of 20 mm. We measured the conversion rate with varying feed rate of $H_2O_2$ and preheating temperature. With the feed rate of $H_2O_2$, the space time within the reactor varies as well. For the bed length of 20 mm, space time more than 480 s was required for full conversion.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1993.04a
• /
• pp.39-40
• /
• 1993

부분 산화반응에 주촉매로 사용되는 바나듐($V_2O_5$)을 담체 내부에 코팅하기위한 방법과 조건을 찾고, 제도된 바나듐막의 구조적 전자적 특성과 투과도 특성을 알아보며 이 바나듐막을 코팅한 막반응기를 이용하여 탄화수소의 부분 산화반응을 수행하여 그 반응특성을 알아보았다.

• Applied Chemistry for Engineering
• /
• v.18 no.5
• /
• pp.511-515
• /
• 2007

The yield of oil was rapidly increased at $440^{\circ}C$ compared to $400^{\circ}C$ and $420^{\circ}C$ when the isothermal pyrolysis of waste ship lubricating oil was carried out in tubular type reactor, and pyrolysis was almost finished within 30 min. The yield of gas was decreased depending on the reaction temperature in which that of solid was not much changed. Pyrolysis experiments of waste ship lubricating oil were carried out with used ZSM-5 produced from a petrochemical process. The yield of gas was highly increased in the case of used ZSM-5 and fresh ZSM-5 compared to the case without catalyst. The produced oil and gas were almost constant for fresh ZSM-5 and used ZSM-5 at the same reaction temperature. In the reaction temperature $400{\sim}440^{\circ}C$, the selectivity of $C_5-C_{11}$ was two times higher with fresh ZSM-5 and used ZSM-5 than the case without catalyst.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.05a
• /
• pp.145-148
• /
• 2008

A 50 Newton monopropellant thruster being developed for attitude control in a variety of aerospace application systems is described in this paper. A scaled down thruster with platinum on aluminum oxide in the reaction chamber was tested to determine the catalyst capacity. A scaled up thruster, was designed and fabricated using data obtained on small scale device, was evaluated by decomposition efficiency based on temperature, efficiency of characteristic velocity, and measurement of thrust. The performance of a scaled up thruster was 42 Newton in thrust, 98 % in efficiency of characteristic velocity, and 123 sec in specific impulse at sea level.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.12 no.3
• /
• pp.24-33
• /
• 2008

A 50 Newton monopropellant thruster being developed for attitude control in a variety of aerospace application systems is described in this paper. A scaled down thruster with platinum on aluminum oxide in the reaction chamber was tested to determine the catalyst capacity. A scaled up thruster which was designed and fabricated using data obtained from a small scale device was evaluated by its decomposition efficiency based on the temperature, the efficiency of characteristic velocity, and the measurement of thrust. The performance of a scaled up thruster was marked by a measured thrust of 42 Newton, 98 % efficiency of the characteristic velocity, a specific impulse of 123 sec at sea level.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.05a
• /
• pp.373-376
• /
• 2010

The characteristics of thermal-resistance catalyst for $N_2O$ propellant decomposition were studied in the present study. Si was added to the $Al_2O_3$ support to stabilize its surface area at high temperature (> $1000^{\circ}C$). Ru was used as a catalyst for $N_2O$ decomposition. The prepared catalysts were characterized using SEM, EDS and XRD analysis, and $N_2O$ conversion was measured as reaction temperatures. The Ru/$Al_2O_3$-Si catalyst showed better performance than Ru/$Al_2O_3$ catalyst.

• Journal of the Korean Applied Science and Technology
• /
• v.30 no.4
• /
• pp.726-739
• /
• 2013

Fischer-Tropsch synthesis (FTS) converts synthesis gas (CO and $H_2$) into longer chain hydrocarbons by a surface polymerization reaction. Cobalt- or iron-based catalysts normally show excellent activity for syngas conversion to petroleum products leading to super clean diesel fuels. The catalytic activities of the catalysts in FTS depend on the number of active sites on the surface. The number of active site was determined by the active metal particle size, loading amount, reduction degree and support-active metal interaction. The investigation adopts new methodology in preparing FT catalyst, which contains the controlled synthesis of active metal. The main focus of this paper is to give an overview of the types of catalysts, also including their preparation and reduction; the types of FT reactors; and also including the reaction conditions.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1994.05a
• /
• pp.98-102
• /
• 1994

천연가스의 주성분인 순수 메탄에 대한 촉매 산화반응은 Pd촉매가 가장 양호하나 LP가스의 주성분인 프로판에 대해서는 Pt촉매가 가장 양호한 결과를 보였다. 그러나 유황 피독된 Pd촉매는 메탄에 대해 영구피독 현상을 보였고, fresh한 Pd촉매는 연료 중 미량의 유황분량에 의해 반응 개시온도가 지연되는 경향을 보였다. 이와 같은 촉매독 영향이 적은 Rh촉매버너를 개발하여 8000시간 이상 성공적인 연소 실험을 하고 있으며 C 방적의 염색 시험기에 적응 실험한 결과 기존의 적외선 전기 건조기에 비해 에너지 절감은 약30-40%를 기하였고 연료비는 70-80%의 절약효과를 얻었다.