• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 2004.11a
• /
• pp.127-132
• /
• 2004

• Applied Chemistry for Engineering
• /
• v.10 no.5
• /
• pp.754-760
• /
• 1999

The properties of the catalyst for a direct internal reforming type molten carbonate fuel cell were examined by ICP, BET, CHN, EDS, and $H_2$ chemisorption. Potassium and lithium, the components of carbonate electrolyte, were transported to the catalyst during the operation of fuel cell, and the amounts of the deposited alkali elements were reduced in the order of inlet, outlet, and the middle. From the direct correlation between the amount of alkali and the physical properties such as BET surface area and Ni dispersion, and from the observation of the lump of the alkali species on the poisoned catalyst, it was confirmed that the physical blocking of the catalyst by alkali deposition was the main reason for the deactivation. Although the amount of alkali species was greater at the inlet than at the oulet, the catalyst sampled from the outlet had lower activity. This was caused by the chemical interaction between the alkali species and the catalyst at the outlet where temperature was highest in the cell body, which was detected by FT-IR analyses.

• KSBB Journal
• /
• v.11 no.2
• /
• pp.159-164
• /
• 1996

Transesterification of used frying oil was investigated to produce the bio-diesel oil. Experimental conditions included molar ratio of used frying oil to alcohol (1:3, 1:5 and 1:7), concentration of catalyst (0.5, 1.0 and 1.5 wt.%), ippe of catalyst(sodium melhoxide, NaOH and KOH), reaction temperature (30, 45 and $60^{\circ}C$), and types of alcohol(methanol, ethanol and butanol). The conversion of used frying oil increased with the alcohol mixing ratio and with the reaction temperature. The effect of the type of catalysts on conversion was not significant. The highest conversion was obtained when methanol was used as alcohol. Viscosity was a little higher with the ester product over grade #2 diesel oil. But the physical properties improved significantly with transesterification, resulting in similar fuel properties with those obtained for grade #2 diesel fuel.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.15 no.6
• /
• pp.56-62
• /
• 2011

An experimental study on design of a catalytic ignitor was performed to use an ignition source for a small bi-propellant liquid rocket engine which use hydrogen peroxide and kerosene as propellants. In the catalytic ignitor, hot gas of hydrogen peroxide which was decomposed by a catalyst induced autoignition of kerosene. Mass flow rate and O/F ratio for the ignitor were calculated by CEA code. A combustion chamber which had a quartz window and thermocouples was manufactured to determine whether the ignition is successful. Ignition performance was investigated according to exit area of fixed rings and mixture ratio. Results showed that reliable ignition performance was achieved at non-choking exit area of fixed ring and O/F ratio of 6~8.

• Journal of the Korean Applied Science and Technology
• /
• v.32 no.4
• /
• pp.712-717
• /
• 2015

In this study, the experiment of CO production was performed using carbon dioxide and coal. The synthesis characteristics of CO gas was investigated using the chemical activation method of KOH. The preparation process has been optimized through the analysis of experimental variables such as activating chemical agents to coal ratio, the flow rate of gas and reaction temperature during $CO_2$ conversion reaction. Without the catalyst of KOH, the 66.7% of $CO_2$ conversion was obtained at the conditions of $T=950^{\circ}C$ and $CO_2$ flow rate of 300 cc/min. On the other hand, the 98.1% of $CO_2$ conversion was obtained using catalyst of KOH at same conditions. It was found that the feed ratio(Coal : KOH = 4 : 1) had better $CO_2$ conversion and CO selectivity than other feed ratios.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.16 no.4
• /
• pp.50-56
• /
• 2008

Aqueous thermal liquefaction of rice, barley, wheat, and rapeseed straws was investigated to compare the amount of heavy oil with catalysts such as $K_2CO_3$, NaOH and KOH in the reaction temperature at $320^{\circ}C$ for 10 minutes. The reaction was carried out in a 5,000ml liquefaction system with dispenser and external electrical furnace. Raw materials (160g), 2,000ml of distilled water and 10% (wt/wt) of catalyst to plant residue were fed into the reactor. It was observed that the maximum heavy oil yield was about 29% from the feeding stock, barley straw, with addition of KOH. The caloric values of crude oil from different crop residues were ranged from 55% to 66% relative to the raw materials depend on crop residue. It was appeared that its maximum calorific value from wheat straw was approximately 6190 kcal/kg.

• 한국신재생에너지학회:학술대회논문집
• /
• 2005.11a
• /
• pp.267-275
• /
• 2005

차세대 재생산성 에너지로 각광을 받고 있는 바이오디젤은 현재 주로 알칼리촉매를 이용하는 화학공정으로 생산하고 있으나 고에너지 요구성이며 대규모 생산시 폐수발생 등 환경오염 유발요인이 있기 때문에 친환경 생물공정의 필요성이 대두되고 있다. 생물촉매 리파제(lipase)를 이용하는 친환경 생물공정은 화학공정에 비해 다양한 장점을 제공하고 있으나 고가의 효소생산 비용문제로 실용화에 어려움이 있다. 따라서 본 연구에서는 저비용의 생물학적 바이오디젤 생산 시스템 구축을 위해 고활성의 효소 개발, 경제적 재조합 대량생산, 반복 재사용을 위한 효소고정화 등을 통해 고효율의 생산반응계를 개발하였다. 우선 바이오디젤 생산공정에 적합한 리파제로서 CalB(Lipase B of Candida antarctica)를 선택하고 분자 진화기술을 이용하여 효소활성을 17배 향상시킨 CalB14를 개발하였다. CalB14를 효모 발현시스템을 이용하여 경제적 대량생산하기 위해 단백질분비를 획기적으로 개선할 수 있는 맞춤형 분비융합합인자기술(TFP technology)을 이용하여 재조합 CalB를 2 grams/liter 수준으로 분비생산하였다. 생산된 효소를 반복 재사용이 가능하도록 다양한 레진에 고정화하였고 최적의 바이오디젤 전환반응용 고정화효소를 개발하였다. 고정화효소를 효율적으로 재사용하기 위해 바이오디젤 생산용 고정상반응기(packed-bed reactor)를 제작하였으며 기질을 12시간내에 95% 이상 바이오디젤로 수십회 이상 반복전환할 수 있는 경제적인 생물학적 바이오디젤 전환 시스템을 구축하였다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1998.04a
• /
• pp.31-31
• /
• 1998

위성체의 보조추진시스템은 임구궤도까지의 궤도진입 및 임무궤도상에서의 속도 또는 자세제어에 필요한 임펄스를 제공한다. 단일하이드라진 추력기는 하이드라진(H$_2$H$_4$)과 자발적 촉매(Shell 405)의 발열 및 흡열 열분해 반응에 의해 발생하는 질소($N_2$), 수소(H$_2$), 암모니아(NH$_3$), 혼합가스를 노즐을 통해 방출하므로써 요구되는 impulse를 얻는다. 단일하이드라진 추력기 설계는 주입기, 촉매대, 노즐과 기타 설계 형태에 따른 다지관, 링, 스크린, 지지판 등의 부수적인 부품으로 구성된다. 추력기 제작 과정은 크게 piece-parts 기계가공, HEA(Head End Assembly)와 TCA(Thrust Chamber Assembly)로 구성되고 각 세부공정마다 전수시험 및 검사를 가진다. 연소시험설비는 최소 모사진 공 수준이 고도 100,000 ft(8.4 torr)를 만족시킬 수 있는 진공설비, 시험제어부, 성능변수 측정 및 처리부, 추진제 가압 공급부, 기타 환경 안전 및 부대 설비로 구성된다. 추력기 연소성능시험 절차는 추진제 충전 및 오염 여부 표본 검사, 가압 및 공급 라인 이상여부 확인, 추력기 장착, 추진제 가압 및 공급, 시험장치 보정, 진공 모사 및 연소성능시험, data 처리 등으로 구성된다.

• Resources Recycling
• /
• v.22 no.2
• /
• pp.53-61
• /
• 2013

Since the 2000s, to start inducement of SCR(Selective Catalytic Reduction) denitrification facility by large scale companies which are emitted large amount of nitrogen oxides such as power plants, combined heat and power plant, incinerators and chemical plants due to take effect the regulation of stationary sources of nitrogen oxide(NOx), and the total amount of discharged pollutants, such as regulatory gradually emissions regulations are being strengthened and the expanded coverage due to the use of SCR denitrification catalyst is a growing trend. Since 2010 due to the new catalysts to replace the already installed power plants and incinerators due to inactive, and catalytic denitrification SCR waste catalyst waste as a resource rather than the development of technologies for recycling situation is urgently needed. In this study, analyzed paper and patent for recycling technologies of waste catalyst. The range of search was limited in the open patents of USA (US), European Union (EP), Japan (JP), Korea (KR) and SCI journals from 1975 to 2012. Patents and journals were collected using key-words searching and filtered by filtering criteria. The trends of the patents and journals was analyzed by the years, countries, companies, and technologies.

• Korean Chemical Engineering Research
• /
• v.51 no.3
• /
• pp.319-324
• /
• 2013

The partial oxidation reaction of methane was investigated to produce syngas with $Ni/CeO_2-ZrO_2$, $Ni-Ru/CeO_2-ZrO_2$ and $Ni-Pd/CeO_2-ZrO_2$ catalysts. Honeycomb metallic monolith was applied in order to obtain high catalytic activity and stability in partial oxidation reforming. The catalysts were characterized by XRD and FE-SEM. The influence of various catalysts on syngas production was studied for the feed ratio (O/C), GHSV and temperature. Among the catalysts used in the experiment, the $Ni-Pd/CeO_2-ZrO_2$ catalyst showed the highest activity. The 99% of $CH_4$ conversion was obtained at the condition of T=$900^{\circ}C$, GHSV=10,000 $h^{-1}$ and feed ratio O/C=0.55. It was confirmed that $H_2$ yield increased slightly as O/C ratio increased, while CO yield remained almost constant. Also, $CH_4$ conversion decreased as GHSV increased. It was found that the safe range of GHSV for high $CH_4$ conversion was estimated to be less than 10,000 $h^{-1}$.