• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2007.04a
• /
• pp.110-113
• /
• 2007

For the development of hydrazine decomposition catalyst, Hot-fire test to verify performance of catalyst is required. The purpose of a long-life firing test is to demonstrate the capability of a design to perform for the maximum duration or cycles of operation. This paper describes the progress of the catalyst performance test, explains the test matrix, and presents the test results.

• Journal of Life Science
• /
• v.2 no.4
• /
• pp.220-231
• /
• 1992

항체의 구조와 기능, 촉매항체의 이론적 배경과 방법론에 대하여, 특히 에스테르-아미드결합의 가수분해반응을 중심으로 기술하였다. 항체단백질은 분자량이 약 150kDa이며, 2가닥의 L사슬과 2가닥의 H사슬로 구성되어있다. 항체에 촉매작용을 도입하는 연구가 행해지고 있는데 대표적인 방법은 hapten에 대한 항체의 입체적 또는 전자적 상보성은 이용하는 것이고 둘째는 기질 특이적인 항체를 직접 화학수식 하든가 또는 부위 특이적 변이유발 등의 방법으로 촉매활성기를 도입하는 방법이다. 촉매항체의 매력은 합리적인 hapten의 설계로 원하는 촉매활성을 갖는 항체를 유도하는 데 있다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.05a
• /
• pp.247-250
• /
• 2009

The catalytic combustor has the advantage of stable combustion under very lean conditions with low emissions of $NO_x$, CO and unburned hydrocarbon(UHC). Notwithstanding these advantages, the commercial application of the catalytic combustion has been delayed due to the complicated reaction process. For the stable operation of catalytic combustor, study on the combustion characteristics of the catalytic combustor is needed. So, in this study, numerical study on the propane combustion characteristics of the catalytic combustor with Pd-based catalyst is performed.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.6
• /
• pp.641-648
• /
• 2011

Off-gases emitted from the anode of a molten carbonate fuel cell (MCFC) at high temperatures for power generation are used as fuel in catalytic combustion. The heat generated in the catalytic combustor is utilized as the heat for the endothermic reaction required for steam reforming. Among the various operational conditions of the integrated reactor, we varied the inlet gas compositions of the catalytic combustor according to fuel utilization in the MCFC and the ratio of steam to carbon in the reformer. Subsequently, the thermal behaviors and reaction characteristics of the integrated reactor were investigated experimentally. The fundamental data from this experimental study will be useful for the design and fabrication of a more practical integrated reactor in the future.

• Applied Chemistry for Engineering
• /
• v.29 no.2
• /
• pp.248-251
• /
• 2018

Catalytic pyrolysis of the waste paper cup containing coffee residual (WPCCCR) was performed using a fixed bed reactor and pyrolyzer-gas chromatography/mass spectrometry (Py-GC/MS). Non-catalytic pyrolysis of WPCCCR produced a large amount of oil together with gas and char. The use of both HZSM-5 and HY decreased the yields of oil and increased the yield of gas due to the additional catalytic cracking. Owing to the acidic catalytic properties of HZSM-5 and HY, catalytic Py-GC/MS analysis of WPCCCR increased the selectivity to aromatic hydrocarbons in product oil. Owing to properties of HZSM-5 having a stronger acidity and medium pore size, the catalytic pyrolysis of WPCCR over HZSM-5 produced much larger amounts of aromatic hydrocarbons than that of using HY.

• 한국신재생에너지학회:학술대회논문집
• /
• 2006.11a
• /
• pp.485-488
• /
• 2006

고분자전해질형 연료전지(PEMFC)는 다른 연료전지에 비해 소형전원에서부터 분산용전원에 이르기 까지 넓은 응용범위를 가지고 있다. 이러한 PEMFC의 응용범위 중 메탄올 개질반응을 통하여 발생된 수소를 이용하는 휴대용 PEMFC 시스템의 경우, 개질 시 발생하는 일산화탄소가 백금촉매를 피독시켜 연료전지의 성능을 저하시키는 주요 원인이다. 따라서 연료전지의 성능저하를 막기 위해서는 개질가스의 일산화탄소의 농도를 10ppm이하로 낮추는 것이 요구된다. 본 연구에서는 이러한 개질가스의 일산화탄소 농도를 낮추기 위한 반응기를 설계 및 제작하였으며, 상용촉매를 사용하여 CO저감 성능실험을 하였다. 또한, PROX 촉매 및 methanation 촉매를 조합하여 사용함으로써 $140^{\circ}C{\sim}190^{\circ}C$ (약 $50^{\circ}C$)의 온도범위에서 일산화탄소의 농도 10ppm이하의 결과를 나타내었다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.7
• /
• pp.735-742
• /
• 2011

A catalytic burner that utilizes the thermal energy from fossil fuels without the emission of nitrogen oxides ($NO_x$) has been developed. For this purpose, the newly developed burner has two features: firstly, it is in the shape of a flat mat so as to maximize its heating surface, and secondly, it adopts premixed combustion so that it can be used in a closed space. In the present study, the burner was used in a radiation-type industrial dryer. This dryer yields thermal energy in the form of thermal radiation in the infrared regime, which has been proved to be effective for drying organic substances under low-moisture conditions. Analysis of the experimental data has proved that the thermal efficiency of the dryer is better correlated to the moisture than to the dry rate

• Journal of the Korean Society of Propulsion Engineers
• /
• v.22 no.2
• /
• pp.29-37
• /
• 2018

This paper reports the preliminary firing test performed with an ADN-based monopropellant using a 5 N scale thruster. ADN-based propellant and catalyst was fabricated and catalytic combustion of propellant was characterized by DSC-TG analysis. Although an explosion in the catalyst bed was occurred, high temperature in the catalyst bed obtained and demonstrated catalytic combustion of the propellant. Preliminary test results motivates the research for catalysts with better thermal stability.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.4
• /
• pp.369-375
• /
• 2010

The study on the characteristics of nitrous oxide catalytic decomposition was carried out to utilize the nitrous oxide as a propellant. The Pt, Ir and Ru were synthesized to select a high performance catalyst for the nitrous oxide decomposition reaction. The respective catalyst precursors were loaded in the $Al_2O_3$ support using an wet impregnation method. The $N_2O$ conversion as a variation of space velocity and reaction temperature was measured using a tubular reactor. The catalyst loss was measured to evaluate the durability of catalysts after the reaction at $800^{\circ}C$ for 2 hours. The $N_2O$ conversion was increased at the decrease of space velocity and at the increase of temperature. The Ru/$Al_2O_3$ catalyst had the highest $N_2O$ conversion at low temperature and the best durability.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.224.1-224.1
• /
• 2010

본 연구에서는 천연가스 수증기 개질반응에 니켈 촉매가 코팅된 금속 구조체 촉매를 적용하여 수소를 생산하였다. 금속구조체 촉매는 기존 펠릿 촉매가 충진 된 촉매반응기에 비해 열 및 물질 전달 특성이 우수하여 이를 여러 개질반응에 적용하고자하는 연구가 수행되어 왔다. 하지만, 기존 금속구조체 촉매의 개발에 있어 촉매와 금속 지지체간의 안정한 결합을 통한 열안정성 확보에 대한 문제는 여전히 해결과제로 남아 있다. 따라서, 본 연구에서는 니켈 촉매를 금속 지지체에 안정하게 부착하기 위한 금속 지지체 표면 처리 방법을 개발하였으며 금속 구조체의 형상에 상관없이 균일한 표면처리가 가능하였다. 개발된 표면 처리방법을 적용한 금속 구조체 촉매는 촉매와 금속지지체간의 결합력 향상으로 인해 120시간 이상 안정한 반응활성을 보였다. 또한, 빠른 공간속도에서도 펠릿촉매와 표면처리를 적용하지 않은 금속 구조체 촉매에 비해 높은 촉매 활성을 보였다. 뿐만 아니라, 본 연구에서 개발된 표면처리를 모노리스와 폼을 비롯한 다양한 형상의 금속구조체 촉매에 적용하여 기하학적 표면 특성에 따른 촉매의 활성 차이를 살펴보았다. 겉보기 표면적이 넓은 금속구조체일 수록 촉매의 고분산 코팅에 유리하여 높은 활성을 보였다.