• Research in Plant Disease
• /
• v.14 no.3
• /
• pp.233-237
• /
• 2008

Tomato yellow leaf curl virus (TYLCV), a newly reported Geminivirus from tomato, generated recently large economic losses in Korea. Development of a fast and precise genetic diagnosis technique for detecting TYLCV which Agricultural research and extension services can utilize easy and handy is very important to prevent yield losses. Virion Capture (VC)/PCR is a simple, accurate and economical genetic detection method without any works or commercial kits for the extraction of the nucleic acid from the infected plants. Primers of twenty two for detection of TYLCV were designed and tested with extracted total DNA or crude sap from tomato leaf infected with TYLCV and healthy plant. Nine primers for total DNA using conventional PCR and another 9 primers for VC/PCR were selected eventually. Primers of six having same specificity were selected from the two methods and tested with other Geminivirus, Tobacco leaf curl virus (TLCV) by VC/PCR. Finally specific primers of four were selected for detection of TYLCV using VC/PCR, and Deng (540, 541), a degenerate primer for Geminivirus reported in 1996, was also developed for VC/PCR.

• Journal of the Korean GEO-environmental Society
• /
• v.11 no.3
• /
• pp.5-16
• /
• 2010

Groundwater quality monitoring wells, which is over 2,000 in South Korea, were managed to observe groundwater quality since the early 1990s. Groundwater was sampled and analyzed biannually from 781 monitoring wells located in the areas with a high possibility of pollution. The average concentrations of cyanide, mercury, phenols, hexavalent chromium, trichloroethylene, tetrachloroethylen, and 1.1.1-trichloroethane for 12 years' data of detected cases were above the groundwater quality standard, but the average concentrations of the general quality items such as pH, electric conductivity, nitrate-nitrogen, and chloride, are below the standard. To compare a quality trend for each land-use type of the monitoring site, Sen's method is used for four quality items; chloride, nitrate-nitrogen, pH, and electric conductivity. The upward trend for these items is remarkable in urbideareas and industrial complexes and this trend continues still strongly after 2001. The deviation in a trend slopes of monitoring wells becomes bigger in the mid-2000s. In conclusion, trend analysis using existing monitoring data cidebe effective to forecast the future water quality condition and the solid action to protect groundwater quality should be done in advance using a result of trend analysis.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.23 no.4
• /
• pp.313-325
• /
• 2011

Finite element grid system using h-refinement on the Yellow Sea was constructed based on previous study (Suh, 1999b) from 14 K to 210 K and special attention was concentrated on refining the coastal zone. In grid generation, depth change between adjacent points and non-dimensional tidal wave length ratio were considered. As a result approximately a quarter of the total nodes are located nearby 5 m of shallow area. Accurate bathymetry data using 30's and ETOPO1 with open boundary conditions of 8 major tidal constituents extracted automatically from FES2004 have been applied. In tidal simulation a 3-dimensional nonlinear harmonic model was setup and tidal amplification due to changes in vertical turbulent and bottom friction were simulated. In this study not only 8 major tidal constituents but also nonlinear shallow tides $M_4,$, $MS_4$ and long period $M_f,$, $M_{sf}$ were reproduced. It is found that implication of spatial variation of friction coefficient plays a very important role in reproduction of astronomical and shallow tides which are computed by iterative computation of nonlinear terms. Also it should be considered differently with respect to tidal periods. To understand the distribution of tidal asymmetry, amplitude ratio of $M_4/M_2$ and phase differences $2g(M_2)-g(M_4)$ were calculated. Tidal distortion ratio marks up to 0.2 on the west coast showing shallow coastal characteristics and somewhat wide range of ebb-dominances in front of Mokpo area are reproduced.

• Membrane Journal
• /
• v.12 no.1
• /
• pp.8-20
• /
• 2002

In this study using $N_2$-back flushing, which wwas not the general back-flushing method of membranes, the discharged wastewater from a paper plant was filtrated by 4 kinds of tubular carbon ceramic ultrafiltration membranes. We could in vestigate effects of $N_2$-back flushing period, transmembrane pressure (TMP)and flow rate and find optimal operating conditions. The $N_2$-back flushing time (BT) was fixed at 40 sec, filtration times (FT) were changed in 4~32 min, TNP in $1.0~3.0kg_f/cm^2$ the flow celocities in 0.53~1.09cm/s. The optimal conditions were discussed in the viewpoints of dimensionless permeate flux ($J/J_0$), toal permeate volume ($V_T$) and resistance of membrane fouling ($R_f$). Optimal back-flushing period was BT/FT=0.167 (FT=8 min ), in which more $V_T$ was obtained than that in BT/FT=0.083 (FT=4 min) which was the most friquent back-flushing condition. Then rising TMP should increase the driving force, and more $V_T$ could be accumulated. And rising flow rate should decrease membrane fouling increase permeate flux, and more $V_T$could be produced. Average rejection rates of pollutants were higher than 95% for turbidity and 45~83% for $COD_{Cr}$, but rejection rates of total dissolved solid (TDS) were lower than 10%.

• Journal for History of Mathematics
• /
• v.25 no.4
• /
• pp.53-67
• /
• 2012

Today, it is necessary to calculate orbits with high accuracy in space flight. The key words of Poincar$\acute{e}$ in celestial mechanics are periodic solutions, invariant integrals, asymptotic solutions, characteristic exponents and the non existence of new single-valued integrals. Poincar$\acute{e}$ define an invariant integral of the system as the form which maintains a constant value at all time $t$, where the integration is taken over the arc of a curve and $Y_i$ are some functions of $x$, and extend 2 dimension and 3 dimension. Eigenvalues are classified as the form of trajectories, as corresponding to nodes, foci, saddle points and center. In periodic solutions, the stability of periodic solutions is dependent on the properties of their characteristic exponents. Poincar$\acute{e}$ called bifurcation that is the possibility of existence of chaotic orbit in planetary motion. Existence of near exceptional trajectories as Hadamard's accounts, says that there are probabilistic orbits. In this context we study the eigenvalue problem in early 20th century in three body problem by analyzing the works of Darwin, Bruns, Gyld$\acute{e}$n, Sundman, Hill, Lyapunov, Birkhoff, Painlev$\acute{e}$ and Hadamard.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.377-377
• /
• 2017

다목적댐은 비어있는 저수지 용량을 활용, 상류에서 유입되는 홍수를 저류하여 하류의 피해를 경감시키고, 저류된 저수량을 활용하여 갈수시 생 공 유지용수 등을 목적에 맞게 하류로의 공급에 주요 목적이 있다. 이를 위해 댐 계획에는 상류에서 유입되는 목표 빈도 계획홍수량을 산정하고, 이에 따른 여수로의 계획방류량 등이 포함된 홍수 조절 방안이 수립된다. 다목적댐은 그 중요도 때문에 많은 사회적 재화(財貨)가 투입되어 하천에서 가장 높은 빈도인 200년 빈도 홍수량에 대비하도록 설계되어 있다. 그러나 대부분의 댐 하류 하천에서는 긴 연장에 따른 투자비용 등의 한계로 상류 댐에 미치지 못하는 100년 빈도 이하로 설정되어있다. 이런 상 하류의 홍수계획간 괴리로 댐의 계획 방류량 수준의 홍수 조절시에는 하류 하천에 재난상황으로 발생할 우려가 있다. 기상예보의 고도화로 단기 예보의 정밀도가 높아져 단기간 댐 운영에는 효과적으로 활용되고 있다. 하지만 5일 이후를 예보하는 중 장기예보는 아직까지도 불확실성이 높은 실정이다. 여기에 기후변화 등 기상의 불확실성을 고려하여 홍수기 초 장마와 태풍 등의 영향에 대비하기 위해 무작정 댐을 저(低)수위로 운영하면 이후 여름 가뭄에 취약해 지고, 반대로 저수량 확보의 고(高)수위 운영을 할 경우 연이은 태풍 등 홍수상황에 취약해 지게 된다. 최근 '14~'15년도 낙동강 수계에 여름가뭄으로 안동 임하댐이 가뭄단계에 돌입하는 등 홍수기초 적정 저수량의 확보는 안정적 수자원시설 운영에 중요성이 커지고 있다. 본 연구에서는 이러한 불확실한 기상상황에 대비하고 댐의 이치수 목적 달성을 위해, 홍수기초 가능한 저수량을 확보하되 계획홍수량이 들어와도 하류피해는 경감시킬 수 있는 저수지 수위를 찾고자하였다. 이를 위해 낙동강 수계 9개 다목적댐(안동, 임하, 성덕, 보현산, 군위, 김천부항, 합천, 남강, 밀양댐)을 대상으로 댐 설계 및 직하류 하천 상황을 고려한 "홍수기초 댐 저수량 확보 수위 검토"를 실시하였다. 댐 직하류 하천의 홍수대비 상황 및 홍수조절시 제약사항 등을 조사해 주요지점(Critical Point)을 선정하고 그 지점의 홍수량을 파악한다. 이어서 저류함수 모형을 활용하여 댐별 저수지 모의 운영을 실시하였다. 대상 댐 저수지에 계획홍수량을 유입시키고 수위를 점차 조정하면서 하류 지점의 홍수량 내의 규모로 방류를 하는 저수지 모의 운영을 실시하였다. 이때 저수지의 계획홍수위를 초과하지 않는 등 안정적 홍수조절이 가능한 특정 수위를 찾아 하류 하천 환경을 고려한 댐 운영 수위로 선정하였다. 최근 홍수기총에는 강수량이 계속 줄어들고 홍수기 이후 더 많은 강수가 내리는 등 기후변화로 댐 운영은 날로 어려워지고 있다. 본 연구의 분석 결과는 홍수기초 가뭄 및 장마 또는 태풍 등에 대비하여 댐 운영의 이 치수 두 가지 목적을 달성하는데 참고가 될 수 있을 것이다.

• Korean Journal of Remote Sensing
• /
• v.34 no.6_4
• /
• pp.1545-1553
• /
• 2018

Recent eruptive activity at Kīlauea Volcano started on at the end of April in 2018 showed rapid ground deflation between May and June in 2018. On summit area Halema'uma'u lava lake continued to drop at high speed and Kīlauea's summit continued to deflate. GPS receivers and electronic tiltmeters detected the surface deformation greater than 2 meters. We explored the time-series surface deformation at Kīlauea Volcano, focusing on the early stage of eruptive activity, using multi-temporal COSMO-SkyMed SAR imagery. The observed maximum deformation in line-of-sight (LOS) direction was about -1.5 meter, and it indicates approximately -1.9 meter in subsiding direction by applying incidence angle. The results showed that summit began to deflate just after the event started and most of deformation occurred between early May and the end of June. Moreover, we confirmed that summit's deflation rarely happened since July 2018, which means volcanic activity entered a stable stage. The best-fit magma source model based on time-series surface deformation demonstrated that magma chambers were lying at depths between 2-3 km, and it showed a deepening trend in time. Along with the change of source depth, the center of each magma model moved toward the southwest according to the time. These results have a potential risk of including bias coming from single track observation. Therefore, to complement the initial results, we need to generate precise magma source model based on three-dimensional measurements in further research.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.23 no.4
• /
• pp.234-252
• /
• 2020

This paper is to verify the effectiveness of 'Hybrid Disaster Management Strategy' that integrates 'RTM(Real-time Monitoring) based On-line' and 'UAV based Off-line' system. For landslide prone area where sensors were installed, the conventional way of risk management so far has entirely relied on RTM data collected from the field through the instrumentation devices. But it's not enough due to the limitation of'Pin-point sensor'which tend to provide with only the localized information where sensors have stayed fixed. It lacks, therefore, the whole picture to be grasped. In this paper, utilizing 'Digital Photogrammetry Software Pix4D', the possibility of inference for the deformation of ungauged area has been reviewed. For this purpose, actual measurement data from RTM were compared with the estimated value from 3D point cloud outcome by UAV, and the consequent results has shown very accurate in terms of RMSE.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.6
• /
• pp.11-18
• /
• 2021

Nano bubble water is used in various washing processes, including cleaning of solar panels, salt rejection of roads, and cleaning precision parts of machines. High cleaning efficiency and water conservation are obtained by applying nano bubbles during pretreatment of the marine waste cleaning system. This study compared the salt rejection of nano bubble water, and it was revealed that marine waste was produced by wood immersed in 200,000 mg/L NaCl solution. Using tap water and nano bubble water for washing, comparisons of the surface salt concentrations of wood were determined according to the nozzle, orifice diameter, pump speed and washing time. Decreased surface salt concentration was observed on the wood surface with increasing washing time. Water consumption was optimal between 5- and 10-seconds washing time. Increasing orifice diameter of the nozzle reduced the spraying pressure, with consequent increase in the wood surface salt concentration, thereby establishing the importance of orifice diameter of the nozzle. Compared to levels obtained with tap water, salt concentration of the wood surface after washing with nano bubble water was 2.2% lower with sector nozzle, and 30.9% lower with circular nozzle. In the washing experiment using nano bubble water, the salt concentration on the wood surface was about 9.5 mg/L lower when washed with sector nozzle than the circular nozzle.

• KIPS Transactions on Computer and Communication Systems
• /
• v.10 no.2
• /
• pp.29-38
• /
• 2021

The Internet including mobile networks is developing to overcoming the limitation of physical distance and providing or acquiring information from remote locations. However, the systems that use video as primary information require higher bandwidth for recognizing the situation in remote places more accurately through high-quality video as well as lower latency for faster interaction between devices and users. The emergence of the 5th generation mobile network provides features such as high bandwidth and precise location recognition that were not experienced in previous-generation technologies. In addition, the Mobile Edge Computing that minimizes network latency in the mobile network requires a change in the traditional system architecture that was composed of the existing smart device and high availability server system. However, even with 5G and MEC, since there is a limit to overcome the mobile network state fluctuations only by enhancing the network infrastructure, this study proposes a high-definition video streaming system in ultra-low latency based on the SRT protocol that provides Forward Error Correction and Fast Retransmission. The proposed system shows how to deploy software components that are developed in consideration of the nature of 5G and MEC to achieve sub-1 second latency for 4K real-time video streaming. In the last of this paper, we analyze the most significant factor in the entire video transmission process to achieve the lowest possible latency.