• Journal of the Korean Society of Costume
• /
• v.45
• /
• pp.5-16
• /
• 1999

본 연구의 목적은 Navajo 직물의 역사적 발달을 고전시대를 중심으로 살펴보고 특히 외부영향에 따른 직물의 변화를 고찰하는데 있다. 구체적으로 1) 고전시대의 전통적인 직물은 어떻게 발달하였는가\ulcorner 2) 고전시대 직물의 전통적 요소와 외부영향요인은 어떤 점이 다른가\ulcorner 예 초점을 맞추었다. 연구방법은 아메리카 인디언의 이동,문화 Navajo 직조 및 직물에 대한 문헌을 바탕을 조사하였고 아리조나 주립박물과 아리조나 역사 박물관을 방문하였으며 박물관 안에 있는 전문가들의 조언을 듣고 연구의 자료를 보완하였다. 또 비교 미학적 차원에서 고전시대 navajo 직물의 전통적 요소와 외부영향 요인을 분석하였고 외부영향을 받은 직물의 예를 시각적자료로 제시하였다. 이연구는 인디언직물에 대한 이해, 고전시대. Navajo 직물의 문헌고찰을 통한 민족의복의 문화적측면에 기여할수 이고 현대적 감각을 지닌 Navajo 직물을 한국직물에 접목 응용하는데 도움을 줄수 있다 본 연구의 결과는 다음과 같다. 1. Navajo 직물을 고전, 전환, 양탄자 시대로 구분되었고. 이중에서 고전시대가 navajo 직물의 특성을 가장 잘 나타내었으며 발달된 직조기술을 보였다. Navajo인들의 직조기술은 1863년경 최고조에 달했다. Navajo 직물의 디자인 주제로 주로 인간을 둘러싸고 있는 환경에서 얻어졌고 이것들은 직선의 기하학적 형태로 구체화되었다. 또한 직물에 표현된 색도 자연과 밀접한 관련성을 갖는 있었다. 2. Navajo 직물의 주용한 용도는 여성용 드레스, 남성용 셔츠는 어깨에 걸치는 두르개였다. 여성용 드레스는 동일한 크기의 직물의 두장을 직조한 후에 꿰매었고 남성용 셔츠는 머리가 들어갈수 있는 구멍이 있는 장방형 판쵸 스타일이었다. 어깨에 걸치는 두르개는 여성의 경우 가운데가 검은색이고 가장자리가 푸른색인형태오 흰색과 붉은 색이 교대로 나타나는 형태의 2가지가 있었고 남성용은 고전시대의 대표라고 일컬어지는 족장 두르개였다. 3. Navajo 직물은 외부의 영향을 받아 많은 변화를 가져왔다. 즉 스페인 사람들로 인하여 면 섬유대신 양모섬유를 사용하게 되었고 전통적 모양과 다른직물이 출현하게 되었다. 또한 인디고 염류, 색소니 실, 바에타 직물의 도입으로 다양한 색상의 표현이 가능해졌고 이와 관련하여 다이아몬드 십자형 톱니형 무늬드이 나타나게 되었다. 4, 고전시대를 대표하는 직물로 족장 두르개, 쇼올, 안장덮개를 들수 있으며 이 직물들에서 뚜렷하게 외부영향 요인을볼수 있다. 즉 족장 두르개의 가장 정교한 단계에서 다이아몬드 무늬가 가장가리 가운데 모서리에 위치하여 9지점 배치를 이룬 것 쇼올의 경우 폭보다 길이가 긴 형태의 비전통적 모습을 나타낸 것 안장덮개에서 보여지는 여덟포인트 별 무늬도 외부의 영향을 받은예이다. 뛰어난 직조기술로 유명한 navajo인들은 변화에 잘 적응하는 특성을 갖고 있었다. 외부의 영향을 그들은 긍정적으로 받아들였고 자기 자신들의 필요에 맞도록 수정하여 정체감을 잃지 않으면서도 문화를 발전시켰다. 따라서 고전시대의 Navajo 직물은 고유적 요인과 외래적 요인의 조화를잘 나타내고 있으며 디자인의 탁월함이 세련됨 천연염료와 인조염료의 배\ulcorner에 의한 색상의 우월성 등으로 오늘까지 높이 평가되고있다.

• Korean Journal of Optics and Photonics
• /
• v.15 no.6
• /
• pp.511-518
• /
• 2004

Providing marine signal lanterns with advantages of little weight as well as large aperture, a Fresnel lens has been adopted to transfer the beam from the lanterns up to 10 nautical miles (18.53 km). A Fresnel lens with the diameter of 250 mm and 300 mm was designed by a lens design program and optimized by adjusting the groove parameters of the lens. The angular luminous intensity distribution (ALID) of this lens was calculated by using an illumination analysis program considering the ALID of a light bulb. At the best alignment of the bulb, the maximum luminous intensities (MLI) of the lantern were 1000 cd (in the case of 250 mm diameter) and 1300 cd (in the case of 300 mm diameter). These are more than the critical value of 720 cd that is the Korean Standard of MLI for the marine lantern. The ALID was investigated as a function of misalignment from the lens focus to determine the tolerance of the alignment ranges.

• Journal of Korean Society of Transportation
• /
• v.18 no.6
• /
• pp.7-17
• /
• 2000

The Purpose of this study is to test the effectiveness of Special Transportation Management Zone system (TZ) when it is applied to Dongdaemoon commercial zone located in downtown Seoul. The study consists of two Parts ; the legal components of TZ and the case study on Dongdaemoon district. The case study includes the analysis of current traffic situation on the study zone, the design of implemention alternative for each component of TZ, the framework of impact analysis system, and the analysis results. The study finds, if 2,000 won mandatory parking fee on drivers parking in the buildings only with over 10 parking spaces and over 3.000$m^2$ in floor area, strong illegal parking enforcement, and Pro-hibition of parking passenger cars whose last digit plate number matches with the last digit of date, are implemented in the zone simultaneously, the traffic speed increases to 20.56km/h which is above the target set in the zone. In conclusion, we find that TZ2 can be an effective tool relieving traffic congestion in Seoul, and that it is necessary for introducing TZ in Seoul that relevant laws should be revised and expecting problems should be overcome.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.42 no.2 s.302
• /
• pp.101-112
• /
• 2005

As we perceive the world as 3-dimensional through our two eyes, we can extract 3-dimensional information from stereo images obtained from two or more cameras. Since stereo images have a large amount of data, with recent advances in digital video coding technology, efficient compression algorithms have been developed for stereo images. In order to compress stereo images and to obtain 3-D information such as depth, we find disparity vectors by using disparity estimation algorithm generally utilizing pixel differences between stereo pairs. However, it is not unusual to have stereo images having different intensity values for several reasons, such as incorrect control of the iris of each camera, disagreement of the foci of two cameras, orientation, position, and different characteristics of CCD (charge-coupled device) cameras, and so on. The intensity differences of stereo pairs often cause undesirable problems such as incorrect disparity vectors and consequent low coding efficiency. By compensating intensity differences between left and right images, we can obtain higher coding efficiency and hopefully reduce the perceptual burden of brain to combine different information incoming from two eyes. We propose several methods of intensity compensation such as local intensity compensation, global intensity compensation, and hierarchical intensity compensation as very simple and efficient preprocessing tool. Experimental results show that the proposed algerian provides significant improvement in coding efficiency.

• Journal of the Korean Geotechnical Society
• /
• v.21 no.9
• /
• pp.87-102
• /
• 2005

In the congested urban areas, tunnelling close to existing structures or services often occurs due to the lack of surface space so that tunnelling-induced ground movements may cause a serious damage to the adjacent structures. This study focused on the two dimensional laboratory model pile-soil-tunnelling interaction tests using a close range photogrammetric technique. Testing equipments and procedures were Introduced, particularly features of aluminium rods regarded as the frictional granular material. The experimental result showed that the photo imaging process by the VMS and EngVis programs proved to be a useful tool in measuring the pile tip movements during the tunnelling. Consequently, the normalised pile tip movement data for the influence zones can be generated by the laboratory model tests using the Photogrammetric technique. This study presents influence zones associated with the normalized pile tip settlements due to tunnelling in the cohesionless material. The influence zones were Identified by both a laboratory model test and a numerical analysis. The normalized pile tip movements from the model test were in good agreement with the numerical analysis result. The influence zones proposed in this study could be used to decide the reasonable location of tunnel construction in the planning stage. However, the scale of model pile and model tunnel sizes must be carefully adjusted as real ones for practical application considering the ground conditions at a given site.

• Journal of Yeungnam Medical Science
• /
• v.24 no.2
• /
• pp.344-350
• /
• 2007

Laryngo-tracheal perforation caused by the use of a stylet during tracheal intubation is a rare complication. We present a case of subcutaneous emphysema and connective tissue inflammation after tracheal intubation. The patient was a 41-year-old male undergoing general anesthesia for an appendectomy. The intubation was difficult during laryngoscopy (Cormack- Lehane Grade III). An assistant provided an endotracheal tube with a stylet inside while the laryngoscope was in place. During intubation, a short, dull sound was heard with a sudden loss of resistance after the distal tip of the endotracheal tube passed the rima glottis. A sonogram and computerized tomography revealed subcutaneous emphysema from the neck to the upper mediastinum and fluid collection between the trachea and the thyroid. This lesion appeared to have been caused by the protruded, loose stylet. Anesthesiologists should be aware of the damage a loose stylet protruding beyond the tip of the endotracheal tube can cause.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.10C
• /
• pp.1032-1041
• /
• 2007

The global navigation satellite system (GNSS), which is the core technique for the location based service, adopts the direct sequence/spread spectrum (DS/SS) as its modulation method. The success of a DS/SS system depends on the synchronization between the received and locally generated pseudo noise (PN) signals. As a step in the synchronization process, the tacking scheme performs fine adjustment to bring the phase difference between the two PN signals to zero. The most widely used tracking scheme is the delay locked loop with early minus late discriminator (EL-DLL). In the ideal case, the EL-DLL is the best estimator among various DLL. However, in the band-limited multipath environment, the EL-DLL has tracking bias. In this paper, the timing offset range of correlation function is divided into advanced offset range (AOR) and delayed offset range (DOR) centering around the correct synchronization time point. The tracking bias results from the following two reasons: symmetry distortion between correlation values in AOR and DOR, and mismatch between the time point corresponding to the maximum correlation value and the synchronization time point. The former and latter are named as the type I and type II tracking bias, respectively. In this paper, when the receiver has finite bandwidth in the presence of multipath signals, it is shown that the type II tracking bias becomes a more dominant error factor than the type I tracking bias, and the correlation values in AOR are not almost changed. Exploiting these characteristics, we propose a novel tracking bias mitigation scheme and demonstrate that the tracking accuracy of the proposed scheme is higher than that of the conventional scheme, both in the presence and absence of noise.

• Journal of KIISE:Software and Applications
• /
• v.36 no.1
• /
• pp.70-81
• /
• 2009

Ontology is an explicit specification of concepts and relationships between concepts in an interest domain. As considered as one of typical knowledge representation methods, ontology is applied to various studies such as information extraction, information integration, information sharing, or knowledge management. In IT based industries, ontology is applied to research on information integration and sharing in order to enhance interoperability between enterprises. In supply chains or logistics, several enterprises participate as business partners to plan movements of goods, and control goods and logistics flows. A number of researches on information integration and sharing for the effective and efficient management of logistics or supply chains have been addressed. In this paper, we address an ontology as a knowledge-base for semantic-based integration of logistics information distributed in the logistics flow. Especially, we focus on developing an ontology that enables to represent and translate semantic meaning of EPC data in the EPC Network applied logistics. We present a scenario for tracing products in logistics in order to show the value of our ontology.

• Journal of Korea Technology Innovation Society
• /
• v.18 no.2
• /
• pp.358-386
• /
• 2015

The aim of this paper is to evaluate policy impact of Inno-biz verification and Venture verification, especially focusing on the complementarity effect according to the overlapped support in Korean ICT industry. Alongside the implementation of various government innovation policies, discussions regarding evaluations of such policies have been consistently undertaken in economics, because it is very important to evaluate whether public policies have played a proper role. However, one of the distinguished point of this research from previous studies is that this paper not only includes evaluations of a single policy, but also the discussion about interaction between different innovation policies. The main result of this paper is that, in the case of overlapping homogeneous policies such as Inno-biz and venture verification, the complementarity effect is negative. Compared with previous studies, the uniqueness of this research is as follows. First, deviating from the view of previous studies that focused on the evaluation of a single policy, this paper has considered interactions and the complementarity effect of innovation policy through "policy mix," an economic term. Second, based on this concept, the paper suggests an analysis framework for the evaluation of interactions and the complementarity effect of innovation policy.

• Journal of Internet Computing and Services
• /
• v.8 no.1
• /
• pp.57-70
• /
• 2007

This paper is to construct a healthcare database using information obtained from healthcare home environments, and use this one for healthcare home services, Especially, our researching focus in this paper is how to design healthcare database scheme and how to use this constructed database on the Framework for Supporting Healthcare Integrated Service(FSHIS) we developed previously. Healthcare information is designed to database schemes in accordance to the specific save types of the data collected from various typed-sensors. The healthcare database constructed by using this information for the purpose of healthcare home services is divided into the base information with real schemes and the context based information with view schemes. Firstly, the base information includes low data obtained from physical sensors relevant to locations, healths, environments, and the personnel healthy profiles. The other is the context based information that is produced and fused by using the based information. This context based information might be got via various view schemes according to healthcare application services. Finally, for verifying the practical use of healthcare database constructed in this paper, Via interconnecting this database to our FSHIS, we show an example of healthcare home monitoring service using information (basic and context based information), emergency call, home appliance control, and so on needed from living activity area for elderly living alone.