• Applied Chemistry for Engineering
• /
• v.7 no.6
• /
• pp.1043-1052
• /
• 1996

Supercritical fluid chromatographic method was recommended as an alternative separation method of fatty acids of the conventional method such as distillation or extraction. Although diffusion characteristics are varied by the carbon numbers and the degree of unsaturation of fatty acids, the quantitative data were so rare that the commercialization of supercritical fluid chromatographic method has been hindered. In this study, diffusion coefficients of fatty acids which are differently unsaturated are measured by CPB method in the range of 308.15K to 328.15K and 13MPa to 17MPa in supercritical carbon dioxide. A decrease in the binary diffusion coefficient was observed with an increase in temperature and pressure. Also, the decrease in the binary diffusion coefficient with increasing fluid density and viscosity. Wilke-Chang equation, Funazukuri empirical equation, and Matthews-Akgerman equation are used to correlate the experimental diffusion coefficients of fatty acids in supercritical carbon dioxide. Among the various theoretical equations, Matthews-Akgerman equation based on RHS theory was suggested as a more successful correlation model with experimental data.

• Elastomers and Composites
• /
• v.34 no.4
• /
• pp.350-359
• /
• 1999

Conversion and oil-yield of a used automotive tire sample in supercritical decomposition and extraction for three solvents such as water, 28% ammoina solution and ammonia, were compared. Supercritical extraction with ammonia gave the highest conversion and oil-yield at the same temperature and pressure. In this paper, supercritical ammonia was used as major solvent and tetralin acting as hydrogen-donor, was used as cosolvent. As the amount of tetralin increased, oil-yield was Increased. When a tire sample was extracted by supercritical ammonia, oil-yield was 48.8% at $280^{\circ}C$, 22.3MPa. But when the weight ratio of tetralin to tire sample (weight of tetralin/weight of tire sample) was 5, oil-yield was 61.2% at $280^{\circ}C$ and 22.3 MPa. These phenomena indicate that as radicals produced in supercritical decomposition become stable, the polymerization and the second decomposition of products may be inhibited. Supercritical extraction of a tire sample swollen by tetralin gave high oil-yield although the amount of tetralin was a little.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2006.06a
• /
• pp.77-78
• /
• 2006

• Food Science and Preservation
• /
• v.20 no.6
• /
• pp.827-833
• /
• 2013

In this study we investigated physicochemical properties of Zanthoxylum schinifolium seeds oil base extracts. Supercritical fluid extraction (SFE), roast pressure (RPM) and steam pressure (SPM) method were used for oil base extracts. The pressure and temperature conditions of SFE method were $70{\sim}80kgf/cm^2$ and below $30^{\circ}C$, respectively, by newly designed SFE-$CO_2$ system. The yield of extraction was 38.5% at the SFE method and others were 30% in each. Refractive index of oil base extracts, there was also no difference between them as 1.470~1.473. At the SFE method, viscosity observed higher value better than two method that showed as 181.88~209.93 according to the extraction time. Three oil base extracts showed difference in color which was low in b value at SFE, especially. The result of acid value at RPM that was lower as 0.93 mg/g than 2.36~2.64 mg/g of SFE method. Saponification value ranged $182.96{\sim}196.57mg{\cdot}KOH/g$ in three extraction method. At SPM, TBA value showed as 158.96 mg/kg, but in the SFE method ranged higher value as 201.30~347.14 mg/kg. Fatty acids analysed with 18 varieties in all oil base extracts and the composition of saturated/unsaturated fatty acids was 17:83(v/v) at SEF. Especially, ${\omega}$-3,6,9 fatty acids observed at SFE and SPM, but did not appeared at RPM. Fatty acid of ${\omega}$-6,9 detected in all cases.

• KSBB Journal
• /
• v.22 no.5
• /
• pp.328-335
• /
• 2007

In this work ursolic acid (UA), a poorly water-soluble compound, was inclusion complexed with 2-hydroxypropyl-$\beta$-cyclodextrin (HP-$\beta$-CD) by various methods such as kneading, solvent evaporation and two types of supercritical fluid processes. The solubility and characteristics of these UA/HP-$\beta$-CD complexes were investigated by scanning electron microscopy, x-ray diffraction and HPLC. The water solubilities of the two complexes obtained from solvent evaporation and ASES processes were observed to increase up to 6$\sim$240 folds and 12$\sim$56 folds, respectively, compared with that of unprocessed UA. The stability of UA/HP-$\beta$-CD complex samples in cosmetic formulations was examined at various temperatures for one month. The UA/HP-$\beta$-CD complex prepared by solvent evaporation was found to be most stable among all the cosmetic formulations tested in our experiments.

• Clean Technology
• /
• v.17 no.2
• /
• pp.110-116
• /
• 2011

The dyeing of polyester fiber with two different disperse dyes (Disperse Red 60 and Disperse Yellow 54) was carried out using supercritical carbon dioxide ($SCCO_2$) as a dyeing medium at temperatures ranging from $50^{\circ}C$ to $90^{\circ}C$ and at pressures from 15 MPa to 30 MPa. The dye uptake of Disperse Red 60 on polyester fiber was found to increase with temperature at constant pressure and $SCCO_2$ density (700 kg/$m^3$). At $90^{\circ}C$ and 30 MPa, the dye uptake on polyester fiber increased with dyeing time and the saturation concentration of Red 60 was attained within 240 min, while a longer dyeing time was required for Yellow 54 to reach its saturation concentration. When dyestuff mixtures with mixing ratios of 0.01 to 9.0 (Red 60/Yellow 54) were used, the uptake ratio of the two dyes was found to be proportional to 0.26 power of their mixing ratio. Dyed fibers showed an orange color and the depth of the color depended upon the mixing ratio of the dyestuffs.

• Clean Technology
• /
• v.11 no.4
• /
• pp.171-179
• /
• 2005

Biodiesel is synthesized by transesterification of vegetable or animal oils with alcohols. Since it has similar characteristic with diesel fuel, it can be used as a fuel by mixing with diesel fuel. Moreover, it is advantageous that biodiesel can reduce air pollution emitted from fuel combustion and is produced from sustainable energy, biomass. Recently, many researchers have investigated biodiesel synthesis using supercritical methanol since it is economical due to shorter reaction time and simple separation/purification process, compared with conventional alkali- or acid-catalyzed process. By the development of biodiesel production process from waste edible oil using supercritical methanol, it can be expected to utilize potential energy resources, reduce carbon dioxide emission, and improve environmental conditions.

• Clean Technology
• /
• v.15 no.4
• /
• pp.233-238
• /
• 2009

Supercritical fluid processes have gained great attention as a new and environmentally-benign method of preparing the microparticles of energetic materials like explosives and propellants. In this work, RDX (cyclotrimethylenetrinitramine) was selected as a target explosive. The microparticle formation of RDX using supercritical anti-solvent (SAS) recrystallization process was performed and the effect of operating variables on the size and morphology of prepared particles was observed. N,N-Dimethylformamide was used as organic solvent for dissolving the RDX. The size of the RDX particles decreased remarkably up to less than $10\;{\mu}m$ by SAS recrystallization. In the range of operating conditions of the SAS process studied in this work, the finest RDX particles were obtained at 313.15K, 150 bar, and 15wt% RDX concentration in feed solution.

• Journal of the Korean Chemical Society
• /
• v.38 no.10
• /
• pp.726-733
• /
• 1994

Supercritical fluid extraction (SFE) followed by gas chromatographic separation and mass spectrometric (MS) detection were used in rapid analysis of polycyclic aromatic hydrocarbons (PAH's) in air particulate material extracted for 30 min with 10 ml of supercritical $N_2O$ without another sample preparation step. Two samples, urban dust in Seoul area and a certified air particulate reference material 1649 supplied by the NBS (National Bureau of Standards), were processed for the purpose of evaluating extraction and analysis methods. As a result, the quantitative recovery of PAH's in the SFE method was relatively lower than conventional organic solvent extraction methods, but reproducibility was resonable, and analysis time was reduced remarkably. The method has proved to be suitable for monitoring of PAH's in air particulate material.

• KSBB Journal
• /
• v.19 no.6 s.89
• /
• pp.421-426
• /
• 2004

The extraction and separation of isoflavones from Korean soybean were peformed by various mechanical and chemical extraction methods. They included solvent extraction, stirring, supersonification and sub/supercritical water extraction. From the experimental results of the variation of solvent extraction by change in composition, the increase in extraction of a specific compound by stirring or supersonic energy, and the application of supercritical fluid with superior solvating power over solvents, the sonification was the most desirable extraction method in extracting aglycone isoflavones, daidzein and genistein from Korean soybean.