• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.2
• /
• pp.551-556
• /
• 2006

위치 정보를 얻기 위해 GPS를 이용하며 다수의 GPS 안테나를 이용하면 자세까지 구할 수 있다. 그러나 실내에서는 GPS 신호 세기가 너무 약해 동작하지 않는 단점이 있다. 본 논문에서는 GPS 대신 Zigbee와 초음파를 이용하여 실내에서도 위치와 자세를 구하는 기법을 제시하였다. Zigbee 신호와 초음파 신호의 도착 시간차로부터 송신기와 수신기간의 거리를 구할 수 있으며 이로부터 위치를 구할 수 있다. 여기에 추가의 발신기를 장착하면 두 발신기의 위치 차이로 정의되는 기저선 벡터를 구할 수 있으며 이로부터 자세를 구할 수 있다. 본 논문에서는 다수의 발신기를 이용하여 효과적으로 기저선 벡터를 구하는 기법과, 이로부터 자세를 구하는 시스템을 구축하였다. 추가로 오차해석을 통하여 구해진 자세의 정확도를 예측하였다. 실제 실험을 통하여 20cm 간격의 두 발신기를 이용하여 1도 이하의 오차를 갖는 방위각과 앙각을 연속적으로 구할 수 있음을 확인하였다.

• Proceedings of the Korea Contents Association Conference
• /
• 2010.05a
• /
• pp.387-389
• /
• 2010

유비쿼터스 컴퓨팅 환경에서 다양한 위치 기반 서비스(LBS)를 위해 객체 위치 인식은 필수적인 기술이다. 객체의 위치를 판별하기 위해서 GPS 시스템, 다수의 RF 신호 세기를 이용한 시스템이 이용되고 있다. GPS 시스템의 경우 고가의 수신기가 필요하며 실내 측위 환경에서 활용될 수 없으며, RF 신호를 이용한 위치 인식 시스템의 경우 빠른 신호 속도와 페이딩의 영향으로 충분한 신호의 해상도확보하기 어렵다. 하지만 상대적으로 느린 초음파를 이용한 경우 신호의 해상도가 높아 RF 기반 위치 측위 시스템보다 높은 정확도의 위치 인식이 가능하다. 초음파를 이용한 위치 인식 기술은 RF 통신을 통해 해당 초음파의 정보를 식별하고, 초음파와 RF 신호의 도달 시간의 차를 이용해 위치를 판별한다. 본 논문에서는 초음파 신호 부호화 기법을 통해 RF 통신 모듈 없이 다중 객체의 위치를 인식하는 시스템을 설계하고 구현한다.

• Applied Chemistry for Engineering
• /
• v.29 no.6
• /
• pp.663-669
• /
• 2018

The process of extracting active ingredients from wheat sprout using ultrasound assisted method was optimized with a central composite design model. The response value of the central composite design model established the extraction yield and the total flavonoids content, main effects and interactive effects were analyzed depending on independent variables such as the extraction time, volume ratio of ethanol to ultrapure water, and ultrasonic irradiation power. The volume ratio of ethanol to ultrapure water and ultrasonic irradiation power were relatively large for the extraction yield and the extraction time was most significantly affected the total flavonoids, Considering both the extraction yield and total flavonoids content, the optimal extraction conditions were as follows: the extraction time of 17.00 min, volume ratio of ethanol to ultrapure water of 50.25 vol%, ultrasonic irradiation power of 551.70 W. In this case, the extraction yield and total flavonoids content were 28.43 wt% and $29.99{\mu}g\;QE/mL\;dw$, respectively. The actual experimental extraction yield and total flavonoids content under this condition were 8.73 wt% and $29.65{\mu}g\;QE/mL\;dw$, respectively with respective error rates of 1.05 and 1.13%.

• Applied Chemistry for Engineering
• /
• v.29 no.5
• /
• pp.565-570
• /
• 2018

In this study, the antioxidant was extracted from Broussonetia kazinokii using ultrasound-assisted extraction (UAE) and optimized by using a response surface methodology. The response value of the central composite design model establishes the extraction yield and the DPPH radical scavenging activity. The extraction time and temperature and volume ratio of ethanol/ultrapure water were selected as quantitative factors. When considering both the main and interaction effects, the factor having the greatest influence on the extraction yield and 2,2-diphenyl-1-picrylhydrazyl (DPPH) radical scavenging activity was the volume ratio of ethanol/ultrapure water. The results of optimal extraction conditions were the extraction time (19.92 min), volume ratio of ethanol/ultrapure water (54.23%), and ultrasonic irradiation power (557.65 W). We could also obtained expected results of the yield = 38.93 wt% and DPPH radical scavenging activity = 55.33% under these conditions.

• Applied Chemistry for Engineering
• /
• v.29 no.5
• /
• pp.503-509
• /
• 2018

In this study, we used the ultrasonic extraction process as a method to extract antioxidant substances from kudzu, and measured the content of iso-flavonoids puerarin, daidzein, daidzin contained in kudzu. The response surface methodology which is a statistical analysis method for optimizing the extraction amount of iso-flavonoids from the kudzu and the process condition for maximizing the yield was applied. It is the final objective of this study to effectively derive the condition of the process that matches the target response with a minimum number of experiments and analyze the effect of each process condition on the response. In the response surface methodology, the central composite design was applied and the optimum condition was analyzed, and the three independent variables were set to ultrasonic irradiation time, volume ratio of ethanol/ultrapure water, ultrasonic irradiation power. Using the response surface methodology, the optimum conditions with the maximum extraction yield and the content of iso-flavonoids were evaluated as ultrasonic irradiation time (24.75 min), ethanol / ultrapure water volume ratio (39.75 vol%), ultrasonic irradiation power (592.36 W). The overall satisfaction level appears as high as 0.8938, which is recognized at a significance level within 5%. As a result of analyzing the optimization process, it was confirmed that the ultrasonic irradiation time is the factor that most affects the responses.

• Journal of Industrial Technology
• /
• v.8
• /
• pp.65-70
• /
• 1988

The intensity of ultrasound in liquid is calculated by improved analytic method. Helmholtz equation or Rayleigh's proposition does not offer the analytic solution. Considering a bounded medium, the use of the image source method in electromagnetic thoery gives a new way of calculating the total ultrasonic intensity in liquid. Some methods of measuring the intensities are also mentioned.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2011.04a
• /
• pp.580-581
• /
• 2011

• Annual Conference of KIPS
• /
• 2005.11a
• /
• pp.1339-1342
• /
• 2005

사용자의 위치를 파악하는 것은 위치기반서비스 시스템 개발에 필수 요소이다. 본 논문은 액세스 포인트의 신호의 세기를 참조하여 사용자의 위치를 파악하는 방법을 소개한다. 기존의 위치 파악 시스템은 옥외용과 옥내용으로 분류되고, 옥내용은 실내의 일정 영역에 적외선 센서를 부착하거나, 천정에 초음파와 RF 신호 발생기를 부착하는 등 특수한 환경을 꾸며주는 것이 필수적이다. 옥외용으로는 GPS가 대표적으로 사용되는데 옥내에서는 GPS 데이터를 수신할 수 없다는 단점이 있다. 근래에 들어 무선 랜이 흔히 설치됨에 따라 본 논문은 무선 랜에 이미 설치된 액세스 포인트의 신호 세기를 이용한 측위 방법을 제안한다. 이 방법은 무선 랜이 설치된 곳이라면 옥내나 옥외에서도 적용이 가능한 장점이 있다.

• Applied Chemistry for Engineering
• /
• v.30 no.4
• /
• pp.408-414
• /
• 2019

In this study, an antioxidant was extracted from dandelion leaves using traditional hot water and ultrasonic extraction methods. In order to optimize the extraction yield and total flavonoid, an antioxidant, Box-Behnken design (BBD) model among response surface analysis methods was used. In the case of hot water extraction, the extraction temperature and time as well as the ratio of alcohol/ultrapure water were set as variables, and for the ultrasonic extraction, the ultrasonic survey century and irradiation time and the ratio of alcohol/ultrapure water were variables. Optimum extraction conditions in the hot water extraction method were the extraction temperature and time of $45.76^{\circ}C$ and 1.75 h and the ratio of alcohol/ultrapure water of 41.92 vol.%. While for the ultrasonic extraction method the survey century of 512.63 W, the ratio of alcohol/ultrapure water of 56.97 vol.% and the extraction time of 20.79 min were optimum conditions. Expected reaction yield and flavonoid content values under the optimized condition were calculated as 22.09 wt.% and 28.98 mg QE/mL dw, respectively. In addition, the error value of less than 3% was obtained validating our optimization process.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.2
• /
• pp.207-215
• /
• 2006

This study evaluated the effect of ultrasonic irradiation on reducing membrane fouling for the treatment of chemically treated leachate and biologically treated leachate. The experiments on improvement of membrane flux according to the membrane types(MF and UF) and membrane materials were performed with changing frequency(40 kHz and 120 kHz) and intensity(200 W and 400 W) of ultrasound in ultrasonic membrane separation apparatus which ultrasound can be periodically irradiated. Additionally, the effect of dual frequency ultrasound which 40 kHz md 120 kHz are irradiated simultaneously was evaluated. The improvement of membrane flux by periodical ultrasound irradiation was higher in microfiltration(MF) membrane than in ultrafiltration(UF) membrane. It was sustained more in the MF membrane of polyvinylidene fluoride(PVDF) than in that of polysulfon(PS). Ultrasonic improvement of membrane flux was different depending on the characteristics of target wastewater. It was sustainably maintained without reclogging using dual frequency ultrasound although the improvement of membrane flux was lower.