• Journal of the Korean Society for Nondestructive Testing
• /
• v.21 no.6
• /
• pp.658-662
• /
• 2001

The classification of surface flaw types was performed on the basis of angular dependence of backscattered ultrasound. The copper line adhered on the surface, cower line filled in groove, pure groove and the normal edge were adopted as various surface flaw patterns of glass specimen. A backward longitudinal profile was formed probably by the longitudinal wane scattering at and near 1st critical angle. The wave trains at the peak angles of the backward radiation profiles showed different shapes according to the superposition ratio of scattered and leaky waves. The asymmetry of the backward radiation profile arose due to the scattering effect of flaw. The additive resonance effect of copper line appeared in the left side of the profile. The peak angles of both the longitudinal and radiation profiles were shifted toward small angle by the scattering effect.

• The Journal of the Acoustical Society of Korea
• /
• v.24 no.8
• /
• pp.447-453
• /
• 2005

Laboratory measurements were performed in a uni-algae medium Cochlodinium polykrikoides (Phytoplankton, dinoflagellates) using an Underwater Ultrasound $(5\~15\;MHz)$ to study Characteristics of Acoustic Backscattering of Harmful algae. In an effort to detect the harmful algal scatterers with population density of less than 300 cells/ml that corresponds to the precaution stage of red tide, backscattered signals from various scatterer-density samples were obtained and analyzed. Correlations between volume backscattering strength (Sv) and population density (cells/ml) of scatterers in the medium have been investigated. Comparison of Volume Backscattering Strengths calculated with the fluid-sphere model [1] and the measured values showed an agreement.

• Journal of Korea Water Resources Association
• /
• v.54 no.3
• /
• pp.167-179
• /
• 2021

In order to characterize the mixing process of confluence for understanding the impacts of a river on the other river, it has been crucial to analyze the spatial mixing patterns for main streams depending on various inflow conditions of tributaries. However, most conventional studies have mostly relied upon hydraulic or water quality numerical models for understanding mixing pattern analysis of confluences, due to the difficulties to acquire a wide spatial range of in-situ data for characterizing mixing process. In this study, backscatters (or SNR) measured from ADCPs were particularly used to track sediment mixing assuming that it could be a surrogate to estimate the suspended sediment concentration. Raw backscatter data were corrected by considering the beam spreading and absorption by water. Also, an optical Laser diffraction instrument (LISST) was used to verify the method of acoustic backscatter and to collect the particle size distribution of main stream and tributary. In addition, image-based spatial distributions of sediment mixture in the confluence were monitored in various flow conditions by using an unmanned aerial vehicle (UAV), which were compared with the spatial distribution of acoustic backscatter. As results, we found that when acoustic backscatter by ADCPs were well processed, they could be proper indicators to identify the spatial patterns of the three-dimensional mixing process between two rivers. For this study, flow and sediment mixing characteristics were investigated in the confluence between Nakdong and Nam river.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.21 no.6
• /
• pp.591-597
• /
• 2001

Ti alloy is used for essential parts of aircraft for high temperature environment. Although Ti alloy has excellent performance in regard to mechanical properties, it is difficult ot find fatigue cracks by nondestructive ultrasonic inspection due to its two-phase microstructure, which consists of hard alpha and beta phases. Sound energy reflected from microstructural features in the component produces a background inspection noise which is seen even when no defects are present. This noise can inhibit the detection of critical internal defects such as pores cracks or inclusions. To obtain fundamental data on ultrasonic inspection of Ti alloy, ultrasonic testing was performed using a specimen with small drill holes and ultrasonic wave propagation velocites were measured.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.20 no.2
• /
• pp.102-109
• /
• 2000

This paper describes two different theories used to model the scattering of ultrasound by a volumetric flaw and a crack-like flaw. The elastodynamic Kirchhoff approximation (EKA) and the geometrical theory of diffraction (GTD) are applied respectively to a cylindrical cavity and a semi-infinite crack. These methods are known as high frequency approximations. The 2-D elastodynamic scattering problems of a plane wave incident on these model defects are considered and the scattered fields are expressed in terms of the reflection and diffraction coefficients. The ratio of the scattered far field amplitude to the incident wave amplitude is computed as a function of the angular location and compared with the boundary element solutions.

• Journal of KSNVE
• /
• v.8 no.2
• /
• pp.227-231
• /
• 1998

지난 30여년간 무한 영역에 놓인 유한한 뮬체에 의한 산란을 해석하기 위하여 여러가지 수치적 해석기법이 개발되었다. 이것은 소나, 잠수함 등의 수중 음향을 비롯해서 지진학, 초음파 비파괴검사 그리고 초음파 의료진단 등의 광범위한 영역에서 응용되고 있기 때문에 많은 연구가 있었다. 본 글에서는 먼저 무한 영역에서의 산란문제에 대한 기본 원리를 설명하고 지금까지 연구된 수치적 해석 기법들을 정리해서 소개하여 소음진동 분야에 종사하는 분들에게 응용할 수 있는 기회를 제공하고자 한다.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.4
• /
• pp.62-70
• /
• 2001

Based on the recently developed resonance scattering theory for elastic waves, a relationship between the stress components, which may be measured using ultrasonic transducers, of partial waves scattered from cylindrical fluid scatterer, cavity, and resonance scatterer has been derived. The computed resonance scattered stresses exhibit frequency behaviors similar to the corresponding scattering coefficients: particularly, abrupt changes in phase by 180°near the resonant frequencies. By studying the behavior of pressure in the fluid scatterer, the physics of the theory has been further understood. Using the method studied and developed in this paper, nondestructive characterization of fluid inclusions in elastic media is expected to become more reliable.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.174-174
• /
• 2016

하천은 침식작용과 퇴적작용에 의해 유사를 하류방향으로 이동시킨다. 하천의 침식작용은 하상을 변화시키고 교량, 보 등의 하천 구조물의 안전성을 저해하여 국민의 재산과 생명에 막대한 피해를 입힌다. 또한 퇴적작용은 상류로부터 이동한 유사를 하도 내에 퇴적시켜 하천의 형상을 변화시키고, 통수면적을 감소시켜 홍수기에 범람 빈도와 규모를 증가시킨다. 이처럼 부유사 자료는 하천 구조물의 설계, 수자원 개발 및 관리를 위한 하천계획의 전반에 있어 매우 중요한 자료이지만, 국내의 경우 유사량 측정방법에 대한 연구가 미비하여 대부분 유사량 채집기를 활용한 직접 측정이 이루어지고 있다. 하지만 유사량 채집기를 활용한 관측은 매우 제한된 지역에서 간헐적으로 실시되고 있어 측정 자료가 부족한 실정이다. 이러한 한계를 극복하고자 간접적인 측정 방식을 개발하였으나 우리나라의 강우 특성상 홍수기를 거치면서 하천의 수리학적 특성이 변화하여 관계식의 신뢰도가 떨어지며 자주 갱신해야 한다는 어려움이 있다. 본 연구에서는 횡방향 유속과 신호대잡음비(Signal to Noise Ratio, SNR)를 측정하는 H-ADCP(SonTek, SL-3000)와 레이저 회절을 이용하여 지점의 입도분포와 부유사 농도를 측정하는 레이저부유사측정기(LISST : Laser In-Situ Scattering and Transmissometry)를 이용하여 자료를 취득하였다. 그리고 취득된 신호대잡음비, 부유사 농도간의 관계분석을 통해 회귀식을 구축한 후, 초음파 산란도로 정의되는 신호대잡음비를 활용하여 실내 실험수로의 부유사량을 산정하였고 실측 부유사량과의 비교를 통해 오차 분석을 실시하였다. 오차 분석 결과 실측 부유사량은 138.15g/s, 추정 부유사량은 165.372g/s로 신호대잡음비를 이용하여 추정한 부유사량이 약 19% 과다산정 하는 것으로 나타났다. 본 연구의 결과는 현재 우리나라에 다수 설치되어 있는 수평초음파도플러유속계(H-ADCP)를 활용한 지속적인 부유사량 관측의 토대를 마련할 것으로 사료된다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.10a
• /
• pp.901-904
• /
• 2007

Nowadays, in many fields of medical treatment, we can make an observation and a diagnosis of inward disease without using a surgical operation. As one of them, ultra-sound diagnosis system can be available widely in its cost and size compared with other medical instruments. This system also make it possible for us to see the inner parts of the body in real time harmlessly for a long time. So it can be utilized to inspect the movement of heart or fetus and to diagnose an internal disease of the soft tissues. Ultra-sound images can be generated by the reflexive and scattered wave through the pulse generator and so in ultrasound images there exist inherently many affective noised signals. In this paper, we are to take an noise-restrained image and to extract a more affective regions of the images.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.7
• /
• pp.647-652
• /
• 2016

Guided waves can be used for the inspection of long range pipelines. Surface corrosion is often found as a major defect type in pipelines. The reciprocity relation is a well-established theorem by which one can simplify complicated mathematical expressions. The approach has been already applied to plate and half-space structures to obtain the closed-form solutions of scattered amplitude. However, results for the case of cylindrical structures have not been reported yet. In this paper, the scattering of torsional waves, which is widely used in commercial applications, is explored by the reciprocity theorem approach. Obtaining closed-form solutions of the amplitudes of propagating waves is much simplified by using the reciprocal relation. The scattered amplitudes for elliptical and rectangular defect shapes are calculated with respect to defect depth and width, at frequencies between 0 and 500 kHz. The amplitude shows the periodic result as a function of frequency. The derived closed-form solutions can play a significant role in quantitative signal interpretation.