• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.2
• /
• pp.197-206
• /
• 2006

This study evaluated the effect of ultrasonic irradiation on improving the flux and cleaning efficiency in membrane process which is widely applied for the treatment of landfill leachate. The experiments on improvement of membrane flux according to the types of membranes(hallowfiber microfiltration, MF and tubular ultrafiltration, UF) were performed with changing frequency($40{\sim}120$ kHz), intensity ($200{\sim}500$ W) and irradiation time of ultrasound as well us operation pressure($0.1{\sim}2.3kg/cm^2$). Membrane was fouled for the first 50 min with primary treated leachate and then the change in flux according to ultrasonic irradiation period was observed for 70 min. Parameters influenced to the recovery ratio corresponding the net flux on pure water and to the enhancement ratio applied after ultrasonic irradiation on the flux were analyzed. In same condition, the flux was improved in proportion to ultrasonic intensity while the improvement of flux was inversely proportional to ultrasonic frequency. The cleaning effect of membrane was delayed and reduced when operation pressure of membrane was high. The recovery ratio and enhancement ratio for $0.1{\mu}m$ MF membrane were 10% and 500%, respectively while those were maximized at $75{\sim}98%\;and\;40{\sim}50%$ for UF membrane for 10,000 and 100,000 MWCO, respectively. In conclusion, it was confirmed that ultrasonic cleaning using mechanical vibration is alternative to water or chemical cleaning for improving membrane flux.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2019.05a
• /
• pp.174-175
• /
• 2019

In this study, the spalling and ultrasonic pulse transmission time of concrete were investigated according to compressive strength during heating. As a result, the higher the compressive strength of the concrete, the more the explosion occurs, which affects the cross-sectional loss and the spalling fragment size. Also, ultrasonic pulse transmission time was found to be strongly influenced by the section loss of concrete.

• The Journal of the Acoustical Society of Korea
• /
• v.10 no.6
• /
• pp.12-22
• /
• 1991

초음파 탐촉자 성능의 이론적 평가법을 개발해 이중소자 탐촉자에 적용하였다. 본 방법은 탐촉 자의 발신, 회절, 수신특성을 주파수, 시간 영역에서 평가할 수 있으며, 특히 시간영역에서는 통상 사용 하는 역푸리에 변환법에 의존하지 않고 음파의 투과, 반사 특성을 고려해 파형을 직접 구할 수 있다.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1998.06c
• /
• pp.445-448
• /
• 1998

고유음향 임피던스가 다른 물질이 층상구조를 이루고 있는 매질내에서 임의의 한 층에 형성된 이차원 초음파 음장이 다른 매질로 전파될 때에의 특성을 각스펙트럼법에 의해 해석하였다. 음원으로서는 baffle된 원형 트랜스듀서를, 층상구조를 매질로서는 물과 생체조직(지방)의 경계를 각각 고려하였다. 해석에 있어서는 먼저 각스펙트럼 분해요소, 즉, 음원의 크기 및 거리에 의존하는 기준음장의 최적 크기와 샘플링 간격을 균질매질을 이용하여 결정한 다음, 그 요소를 층상매질에 적용하였다. 그 결과, 경계면에서의 입사각(공간주파수)의 의존하는 투과계수에 입사음장의 곱으로 나타내어지는 투과음장은 각스펙트럼법에 의해 짧은 시간내에 정도 높게 산출될 수 있음을 보인다.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.28 no.1
• /
• pp.64-69
• /
• 2008

In order to detect the internal defects which occur in welding parts of pressure vessel and structures, radiographic testing and ultrasonic testing is applied. However, because of the risks of radiation exposure and film processing, radiographic testing takes a relatively long time to verify the test results and it has affected in the production process. Typically, the manual ultrasonic testing is not easy to reproduce the result and it is highly dependent on the tester's skills. The TOFD technique, one of the automatic ultrasonic testings is spreading alternatively. This research describes the comparing test results by applying radiographic testing and TOFD technique to a mock-up specimen incruding the flaws. The TOFD technique will contribute to improve the objective reliability of the ultrasonic technique.

• Journal of Korean Ophthalmic Optics Society
• /
• v.18 no.2
• /
• pp.107-115
• /
• 2013

Purpose: This study was conducted to investigate the change of soft contact lens parameters after eyeliner deposition and compare the cleaning efficiency and the recovery rate of lens parameters by different cleaning methods. Methods: The eyeliner was deposited on three types of soft contact lenses made of different materials for 1 hour, 4 hours and 6 hours and those lenses were washed by the eyeglasses ultrasonic cleaning and by hands. The changes in visible light transmittance, diameter and surface of those lenses were compared before and after cleaning of the lens. Results: The visible light transmittance of soft contact lenses decreased along with the deposition time of eyeliner. The patterns of the eyeliner deposition on soft contact lens appeared differently depending on the physical properties of the lens material. Thus, the largest eyeliner deposition was found on narafilcon A lens. The diameters of hilafilcon B and etafilcon A lenses were decreased, however, the diameter of narafilcon A lens was increased. The cleaning efficiency of the eyeliner deposition was greater with the multipurpose solution by hands than with the eyeglasses ultrasonic cleaner. However, the recovery of lens parameters such as the lens diameter, visible light transmittance and lens surface due to the eyeliner deposition to its original state was limited. Conclusions: From these results, it is suggested to minimize eye makeup when wearing soft contact lens. Furthermore, the reduced wearing time and shorter cycle of lens replacement may be needed by considering a change of lens parameter when the repeat eye makeup is applied.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.36 no.6
• /
• pp.474-482
• /
• 2016

A Kelvin foam plate - widely used in the energy and transport industries as a lightweight structural material - was examined to estimate its Young's modulus using ultrasound. An isotropic tetrakaidecahedron foam structure was designed in SolidWorks and printed using 3D printer with an ABS plastic material. The 3D printed foam structure was used to build a foam plate with a 14 mm thickness ($50mm{\times}100mm$ in size) for the ultrasonic test. The Kelvin foam plate, a significantly porous medium, was completely filled with paraffin wax to enable the ultrasound to penetrate through the porous medium. The acoustic wave velocity of the wax-filled Kelvin foam was measured using the time of flight (TOF) method. Furthermore, the elastic modulus of the Kelvin foam was estimated based on an elastic structural model developed in this study. The Young's modulus of the produced Kelvin foam was observed to be approximately 3.4% of the bulk value of the constituent material (ABS plastic). This finding is consistent with experimental and theoretical results reported by previous studies.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.381-384
• /
• 2002

이종 매질에서 초음파전달은 각 매질의 음향임피던스에 영향을 받는다. 초음파진동자로 사용되는 압전소자와 매질로 가장 많이 사용되는 물은 음향임피던스 차이가 크므로 경계면에서 투과율이 감소한다. 이를 개선하기 위해 압전소자와 물 사이에 음향정합층을 삽입하여 사용한다. 정합층은 1 layer로 사용되는 경우도 있지만, 넓은 대역폭을 요구하는 분야에서는 2 layer가 사용된다. 본 논문에서는 1 layer 정합층를 갖는 초음파 트랜스듀서에 대해 시간영역에서 해석하는 기법을 분석하였으며, 이를 근거로 매질 사이의 물리적 특성을 고려하여 2 layer 정합층을 갖는 초음파트랜스듀서를 해석하였다. 해석결과 2 layer 정합층일 경우 1 layer에 비해 공진주파수에서의 이득은 감소하였으나 대역폭이 증가됨을 알 수 있었다.

• Applied Chemistry for Engineering
• /
• v.9 no.2
• /
• pp.214-219
• /
• 1998

The transparent conducting tin oxide films were deposited on g1ass substrates by the ultrasonic spray pyrolysis. Examined were effects of deposition parameters on the electrical resistance, optical transmittance, crystal structure, and thickness of tin oxide films. As both the deposition time and concentration of tin(IV) chloride increase, the deposited tin oxide films exhibited the decrease of electrical resistance and optical transmittance in the visible and near infrared region. With increasing heat-treatment temperature in air, the deposited tin oxide films showed the enhanced electrical resistance and optical transmittance. This study suggests that the ultrasonic spray pyrolysis may be a promising deposition technique effectively to prepare transparent conducting films of good quality in a single step.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2004.03b
• /
• pp.684-691
• /
• 2004

Various researches have been undertaken to develope a method of enhancing consolidation. This study investigated the effect of ultrasound on consolidation through a series of laboratory experiments. The tests were conducted using a specially designed and fabricated equipments which can apply ultrasonic energy on a soil sample at consolidation test. Specimens were prepared using a centrifuge facility, and test conditions included ultrasonic power and treatment time. The results of the study show that the effect of ultrasonic energy on consolidation is significant. The degree of significance varies with the test conditions. It could be concluded that the study showed potential application of ultrasound to enhance consolidation.