• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.227-227
• /
• 2021

하천수의 효율적인 관리와 균형적인 물배분을 위해 신뢰도 있는 하천수 사용량 계측자료가 필수적이다. 공업·생활용수는 유량계를 설치하여 취수량에 대한 신뢰도 있는 자료를 홍수통제소에 보고하고 있으나, 농업용수는 유량계 설치 지점이 적고, 수문조작 등의 간접적인 계측방법 허용으로 취수량 자료의 신뢰도가 낮은 실정이다. 본 연구에서는 만경강 상류의 취수보를 대상으로 시험 유역 운영 및 검증을 통해 직접 계측방법의 취수량 산정 정확도를 비교하였다. 적용한 직접 계측방법은 초음파법, 전자파법, 수위-유량관계법으로 산정된 취수량 자료간의 절대오차 비교를 통해 정확도를 평가하였다. 점단위 취수량 자료 비교시, 현장측정값 대비 초음파법 5.86%, 전자파법 7.28%, 수위-유량관계법 11.84%의 오차가 발생하는 것으로 산정되어 초음파법이 가장 높은 정확도를 가지는 것으로 나타났고, 일단위, 월단위 자료 비교시 기준값으로 설정하였다. 일단위 취수량 자료 비교시, 초음파법으로 산정한 일평균 취수량 대비 전자파법 6.62%, 수위-유량관계법 8.62%의 오차가 발생하였다. 월단위 취수량 자료 비교시, 초음파법으로 산정한 월평균 취수량 대비 전자파법 5.81%, 수위-유량관계법 11.03%의 오차가 발생하였다. 산정된 취수량의 정확도는 초음파법, 전자파법, 수위-유량관계법 순이다. 고가의 첨단 계측장비를 적용하여 연속적인 유속 계측을 통해 산정한 취수량이 신뢰도가 높은 것으로 나타났다. 농업용수는 사용시설별 취수량 규모 편차가 크기 때문에, 추후 중요도가 높은 사용시설과 비교적 낮은 시설간의 구분을 통한 직접 계측방법의 최적 선정 후속연구가 필요하다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.05a
• /
• pp.195-198
• /
• 2008

Ultrasonic method is applied for measuring burning rates of the solid propellants, since it can measure burning rates as a function of pressure in a single test performed. However, to replace the stand burner method by the ultrasonic method, it is necessary to verify of its accuracy and reliability. In this study, we investigated the performance of the ultrasonic method for burning rate measurements by comparison to the strand burner results. Furthermore, we investigated the relation between the attenuations of solid propellants and data scattering in the measured burning rates.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05d
• /
• pp.170-175
• /
• 1996

대형 튜브구조물의 길이방향으로 전파되는 유도형초음파(Ultrasonic Guided Wave)를 이용한 원자력발존소내의 열교환기류에 대한 새로운 건전성 평가법을 제시한다. 이를 위해, 유도형초음파의 물리적 특성을 이론적으로 해석하였고 실험을 통해 열고환기류에 대한 유도형초음파법의 타당성 여부를 검토하였다. 국부적인 평가(Local Inspection)에 근거한 기존의 평가법에 비해 유도형초음파법은 단시간 내에 보다 효율적으로 전체 열교환기에 대한 신뢰성 검사(Global Inspection)가 가능하며 만족할 만한 민감도(Sensitivity)를 갖고 있음을 보였다.

• Proceedings of the KIEE Conference
• /
• 2002.04a
• /
• pp.37-39
• /
• 2002

본 논문에서는 유한 요소법을 압전체에 적용하여 계산한 임피던스 파형을 실험적으로 검증하였으며 이를 선형 초음파 모터에 적용하여 선형 초음파 모터의 공진 특성을 해석하였다. 또한 선형 초음파 모터의 동작 특성 및 공진 모드의 타당성을 검증된 유한 요소법을 이용하여 검증하였으며 인가 전압 및 주파수에 따른 선형 초음파 모터의 속도 특성을 뉴럴 네트웍을 이용한 제어법을 통해 검증하였다. 선형 초음파 모터의 정밀 위치 제어의 가능성을 뉴럴 네트웍을 통한 제어법을 통해 검증하였다.

• The Journal of Korean Orthopaedic Ultrasound Society
• /
• v.6 no.2
• /
• pp.45-52
• /
• 2013

Purpose: We wanted to compare the accuracy between the blind anterior approach and ultrasound guided posterior approach, which are preferred in the present clinical practice for the glenohumeral joint injection. Materials and Methods: The consecutive 95 cases were included in that the glenohumeral joint injection was done in the university hospital and the medical record and ultrasonography were available. There were 52 cases which were injected by blind anterior approach (group I) and 43 cases who were injected by ultrasound guided posterior approach (group II). The injection was decided as accurate if the fluid was visualized in the posterior joint under the ultrasound. We evaluated the range of motion before and after 2 weeks of injection. A subjective satisfaction of the patients was interviewed at the 2 weeks after injection. Results: The accuracy of the glenohumeral joint injections of the group I and group II was 80.8% and 90.7%, respectively. The range of motion was improved for the all cases regardless of the approaches. At the 2 weeks after injection, the subjective satisfaction (better than good) was achieved in 73.7%. Conclusion: The accuracy of the blind anterior approach for the glenohumeral joint injection was 80.8%. The accuracy of the ultrasound guided posterior approach was 90.7%. In this comparative study by the one physician, the ultrasound guided posterior approach showed the better accuracy.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2003.10a
• /
• pp.426-430
• /
• 2003

본 연구에서는 초음파현미경의 기하학적 원리와 초음파현미경의 특징중 하나인 V(z)곡선의 간섭파형을 시뮬레이션 하였고, 실제 초음파현미경의 V(z)곡선법을 이용하여 미소영역에서의 누설탄성표면파 음속을 측정하였다. 초음파현미경을 이용한 V(z)곡선법의 음속측정결과가 시뮬레이션 음속값과 큰차이를 보이지 않으므로 미소영역에 초음파현미경의 V(z)곡선법을 적용하여 초음파의 음속측정이 가능함을 확인하였다. 이는 향후 초음파현미경을 이용하여 미세한 재료의 물성평가에 적용할 수 있을 것으로 기대된다.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.11 no.5
• /
• pp.80-85
• /
• 1997

Preventive diagnosis technique of power transforms is very important for highly reliable operation of power systems, and especially that of online transformer is needed in view of economy. Acoustic methods for partial discharge points have been studied abroad since 1960's in earnest. Electric-ultrasonic locating method by which partial discharges are found through detecting the electric and ultrasonic signal generated in partial discharge and ultrasonic-ultrasonic locating method by which partial discharges are found through detecting two ultrasonic signal with two ultrasonic sensor have been researched in our country. By using this ultrasonic-ultrasonic locating method, it was proposed of graphical determination technique of partial discharge points one dimension, two dimension, three dimension. But in locating partial discharges, they have assumed that the number of signal origin is one. So in this study we suggests a method of locating and knowing the number of signal origins when there are several origins by using ultrasonic-ultrasonic method.

• Journal of the Korea Concrete Institute
• /
• v.19 no.1
• /
• pp.3-9
• /
• 2007

With a growing concern about the state of infrastructure worldwide, the demand for the development of reliable nondestructive testing techniques (NDT) is ever increasing. Among possible NDT techniques, microwave method is proven to be effective in fast and non-contact inspection of concrete structures and inclusions inside concrete. It is also found that the microwave method has a potential in detecting the delamination between fiber reinforced polymers (FRP) plate and concrete. On the other hand, ultrasonic method can be another way to find the delamination. In this paper, the research work needed for the development of a reliable microwave method and ultrasonic method is studied in the measurements of concrete specimens reinforced with FRP. Concrete specimens are made with FRP and artificial delamination inside. A microwave measurement system with hom antennas with high center frequency and broad frequency bandwidth are used to image inside concrete specimens for the detection of debonding between concrete and FRP. Also, ultrasonic method is used for the same condition. Both results are compared with each other.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.22 no.4
• /
• pp.377-385
• /
• 2002

Ultrasonic tests employing non-ionizing radiation are preferred in nondestructive examinations since they are safe and simple in use. The same principles of the techniques have been taken as valuable tools in medical area for the diagnoses of diseases, in other words, defects of the human body. The paper overviews the principles of the medical diagnosis based on nondestructive ultrasonic tests, and then evaluates experimentally the clinical potential of C scan images not popular in medicine, for detecting the micro fractures of the cortical bone. In the experiment the micro bone fractures were created on the femurs of porks by loading three point bending forces (2-4kN) with the speed of 1 mm/min. As the extent of the fracture was altered, not only X ray images but also ultrasonic C scan images using a focused ultrasonic probe resonated at 25 MHz were obtained. The results showed that ultrasonic C scan images were capable of detecting the micro bone fractures which were not possible to identify by conventional X ray images.

• Journal of the Mineralogical Society of Korea
• /
• v.13 no.3
• /
• pp.138-146
• /
• 2000

Using the ultrasonic interferometry on the single crystal MgO-periclase, adiabatic bulk moduli were determined to be 163.2 GPa and 162.6 GPa from (100) and (110) lattice plane measurements, respectively. Density was measured on polycrystalline MgO by the X-ray diffraction technique. Results from this study were compared with the previously reported values. Further, the present results were converted to the isothermal bulk moduli and, then compared with the published data available including the energy dispersive X-ray diffraction result which was performed on the same single crystal MgO. The principle and techniques ultrasonic interferometry were introduced too.