• Microbiology and Biotechnology Letters
• /
• v.17 no.3
• /
• pp.198-201
• /
• 1989

Steptomyces sp. GI 32 with high production of glucose isomerase was isolated from soil. The maximum enzyme production was observed in the culture medium containing 1% sorbitol, 0.6% tryptone, 0.4% yeast extract, 1mM Fe$_2$(SO$_4$)$_3$ with initial pH 7.0 when the cell was cultured at 35$^{\circ}C$ about 18 hours with shaking. The enzyme was partially purified by ammonium sulfate fractionation and DEAE cellulose chromatography. The enzyme was also appeared to be relatively thermostable, and no apopreciable inactivation was observed after incubation at 7$0^{\circ}C$ for 1 hour. The optimal pH and temperature of the enzyme were pH 8.0 and 7$0^{\circ}C$, respectively.

• KSBB Journal
• /
• v.17 no.6
• /
• pp.509-514
• /
• 2002

Experiments were carried out to optimize the fermentation conditions for the production of erythritol by salt-tolerant mutant, Candida magnoliae M26. The optimum conditions of erythritol production showed a 1.0 vvm aeration and 500 rpm agitation at 28$\^{C}$ with an initial medium pH of 7.0. The pH control during the fermentation did not improve the erythritol yield and productivity. The maximum erythritol concentration of 143.3 g/L was obtained with 57% yield and 0.70 g/L-h productivity from 250 g/L of glucose and 5 g/L of yeast extract under an optimum fermentation conditions. The medium containing 0.5 M KCl or 0.5 M NaCl enhanced the production of erythritol and glycerol. However, glycerol production increased and erythrtiol production decreased by increasing the concentration of NaCl or KCl.

• Polymer(Korea)
• /
• v.28 no.4
• /
• pp.328-334
• /
• 2004

A series of methoxy poly(ethylene glycol) (MPEG)-poly(L-lactide-co-glycolide) (PLGA) diblock copolymers were synthesized by ring-opening polymerization of L-lactide and glycolide with carbitol (134 g/mole) or different molecular weights of MPEG (550, 2000, and 5000 g/mole) as an initiator in presence of Sn(Oct)$_2$. The properties of diblock copolymers were characterized by using $^1$H-NMR, GPC, and XRD. After uniform mixing of block copolymers and 1% albumin bovine-fluorescein isothiocyanate(FITC-BSA) with a freeze miller, the wafers loaded FITC-BSA were fabricated by using a mold with a dimensions of 3 mm${\times}$1mm diameter. The release profiles of FITC-BSA and the pH changes of wafer were examined using pH 7.4 PBS for 30 days at 37$^{\circ}C$. The release profiles of albumin showed fast initial burst as the molecular weights of MPEG increased. As a result of this study, the release behavior of BSA was controlled with introducing MPEG in the block copolymers.

• Journal of Bio-Environment Control
• /
• v.22 no.1
• /
• pp.65-72
• /
• 2013

This study was conducted to investigate the influences of bicarbonate ($HCO_3^-$) concentrations in irrigation solution on growth of lettuce and change in chemical properties of root media. The blue leaf and red leaf lettuces with two true leaf stages were transplanted into 10 cm diameter plastic pots filled with perlite. The five treatments were made by dissolving $NaHCO_3$ into irrigation solution to reach 30, 70, 110, 150 and $180mg{\cdot}L^{-1}$ $HCO_3^-$. The crops were fed with fertilizer solution contained $HCO_3^-$ with various concentrations and controlled to $100mg{\cdot}L^{-1}$ in nitrogen concentration. The pH in soil solution of root media 10 weeks after transplant of blue lettuces were 7.04 and 7.10 in the treatments of 30 and $70mg{\cdot}L^{-1}$ of $HCO_3^-$, respectively. But those rose gradually after week 3 and finally reached 7.39, 7.48 and 7.56 at week 10 in the treatments of 110, 150 and $180mg{\cdot}L^{-1}\;HCO_3^-$, respectively. The pH in the treatments of 30 and $70mg{\cdot}L^{-1}\;HCO_3^-$ in cultivation of red leaf lettuce were around 6.65 during week 4 to week 8, but this rose abruptly and reached 6.92 and 7.01 at week 10, respectively. Those in the treatments of 110, 150, and $180mg{\cdot}L^{-1}\;HCO_3^-$ rose gradually and finally reached to 7.49, 7.53, and 7.58, respectively. The EC rose gradually after week 2 in all treatments of blue and red leaf lettuces. The change of macro ion concentrations in both blue and red leaf lettuces showed similar trends. The concentrations of $PO_4-P$, $Ca^{2+}$ and $Mg^{2+}$ increased gradually in all treatments of $HCO_3^-$ during cultivation of blue and red leaf lettuces. As the concentrations of $HCO_3^-$ in irrigation solution were elevated, the concentrations of $PO_4-P$, $Ca^{2+}$ and $Mg^{2+}$ became higher and that of ${SO_4}^{-2}$ became lower in soil solution of root media. The main reason of concentration changes were that $HCO_3^-$ influenced pH and the pH changes also affect the activities of the ions in soil solution of root media.

• Journal of Life Science
• /
• v.30 no.8
• /
• pp.680-687
• /
• 2020

Several studies have proved Hovenia dulcis extracts to be an effective antidote for alcoholism, and they are frequently used in the clinical treatment of alcoholic liver disease. The purpose of this study was to investigate the anti-oxidant and anti-senescent activities of 80% methanol fractions of H. dulcis Thunberg in human dermal fibroblast (HDF) cells. The ethanol ethyl acetate fraction showed the highest inhibition of 2,2-diphenyl-1-picryhydrazyl radical scavenging (RC₅₀=3.6±0.8 ㎍/ml) as well as the highest total phenol content (417.2antiholic liver disease. Extracts from e & Tech., Sungkyunkwan University, progressed in the HDF cells, SM22 expression (p<0.001) and β-galactosidase staining intensity increased (p<0.001). An increase in SM22 expression is associated with slower aging which suggests that its expression is high in early aging. HDF treatment using the ethyl acetate fraction significantly increased production of EGF (p<0.01) and PDGF-BB (p<0.01) while SHH expression was reduced (p<0.05). These results suggest that an 80% ethyl acetate fraction of H. dulcis can suppress early aging and demonstrate the potential application of the fraction as a natural anti-senescence agent.

• Journal of Korean Society of Forest Science
• /
• v.84 no.1
• /
• pp.97-102
• /
• 1995

The purpose of this study was to investigate the effect of artificial acid rain(pH2.0, 3.0. 4.0 and 5.0) adjusted by natural rain fall and control group by pH6.5 on the change in needle chlorophyll fluorescence of Pinus densiflora and Pinus thunbergii. This study was performed from May, 1994 to August, 1994, during which 20ml of artificial acid rain was used once a week. The results are as follows : In the first treatment of artificial acid rain the measured indexes of fluorescence have increased in pH4.0 and pH5.0 treatments and decreased in pH2.0 and pH3.0 in comparison with those of the control group. As the treatment of artificial acid rain was processed the fluorescence indexes of both Pinus densiflora and Pinus thunbergii have decreased as the degree of acidity increased higher and that of Pinus densiflora has decreased more significantly than Pinus thunbergii. The measurement of change in the numerical indexes of fluorescence was proved to be a very effective criterion to make an early decision of damage of the vegetation by acid rain.

• 한국생물공학회:학술대회논문집
• /
• 2000.04a
• /
• pp.45-50
• /
• 2000

For the maximum production of pullulan from glucose as a carbon source, the effects of glucose concentration, pH and dissolved oxygen concentration on the cell growth and mass production of high-molecular weight pullulan by A. pullulans ATCC 42023 were evaluated. A. pullulans showed optimum pullulan productivity when glucose concentration was 0.3M (54g/L). And inhibitory effects on the cell growth and the pullulan production were observed at the glucose concentration higher than 0.3M (54g/L). The influence of pH control and dissolved oxygen on the pullulan production and growth of A. pullulans was studied. In shake-flasks, maximum pullulan production was obtained with $11.98g/{\ell}$ when initial pH was 6.5. In the batch fermentation, the maximum pullulan production of $13.31g/{\ell}$ was obtained with constant pH 4.5. And it was found that pullulan yield and synthesis rate increased with oxygen availability. For the production of commercially useful pullulan with high-molecular weight, a mixed carbon source, which was a mixture of glucose and glucosamine, was used for the pullulan fermentation with A. pullulans. On the basis of 5% mixed carbon source, culture with 3% glucosamine with 2% glucose was optimum condition for the production of high (M.W.> 1,000,000) and medium (M.W.> 200,000) molecular weight pullulan with considerable yields of cell mass and product. And the influence of pH control on the molecular weight of pullulan was studied in batch fermentation. It was found that the productivity of high-molecular weight pullulan with pH control at 6.5 was higher than that with no pH control.

• Journal of Life Science
• /
• v.19 no.8
• /
• pp.1033-1038
• /
• 2009

Maximal productions of gellan by Sphingomnas paucibilis NK2000 from 20 g/l glucose and 10 g/l soybean pomace were 7.46 g/l in a flask and 7.35 g/l in a 7 l bioreactor, when the initial pH of media was 6.8. Maximal production of gellan in a 7 l bioreactor under pH control by sodium hydroxide was 8.42 g/l, whereas that under control by potassium phosphate was 8.50 g/l. The optimal concentration of potassium phosphate in a medium for production of gellan by S. paucibilis NK2000 was found to be 5.0 g/l. Maximal production of gellan in a medium containing 5.0 g/l potassium phosphate without pH control was 8.93 g/l in a 7 l bioreactor. In this study, a simple process without pH control was developed to enhance the production of gellan, with optimized concentration of potassium phosphate in the medium.

• KSBB Journal
• /
• v.20 no.6
• /
• pp.453-457
• /
• 2005

We investigated the effect of sulfate re-addition on hydrogen production under sulfur-deprived condition. When the final concentration of sulfate to cell suspensions($0{\sim}120{\mu}M$) was increased, chlorophyll concentration, culture density, and total amount of $H_2$ produced, increased up to an optimal concentration of $30{\mu}M\;MgSO_4$. Maximum hydrogen volume was 236 mL $H_2/L$ culture at $30{\mu}M\;MgSO_4$. However, the addition of excess sulfate(above $MgSO_4\;60{\mu}M$) delayed the start of hydrogen production and the induction of hydrogenase. Accordingly, the final yield of hydrogen production was reduced. Using these results, we attempted the continuous and sustained hydrogen production by sulfate re-addition($30{\mu}M\;MgSO_4$) using a single C. reinhardtii culture for up to 4 cycles. In total, hydrogen production volume was 625 mL $H_2/L$ culture.

• KSBB Journal
• /
• v.14 no.3
• /
• pp.297-302
• /
• 1999

The polymeric matrices coated with poly(DL-lactide) were prepared using chitosan derivatives such as chitosan, chitosan hydrochloride, and sulfonated chitosan for application of drug delivery systems. The drug release study using prednisolone as a model drug was performed in the hydrochloride solution at pH 1.2. The release rate of drug was decreased according to the increased content of matrices. The release rate of prednisolone according to the kinds of polymeric matrices coated were decreased in the order to chitosan, sulfonated chitosan, and chitosan hydrochloride. Drug release rate of polymeric matrices coated with poly(DL-lactide) was not only two times slower than noncoated one, but also the burst effect of initial period of drug release was decreased in comparison with noncoated one. From these results, it was expected that these formulations based on the chitosan derivative matrices coasted with poly(DL-lactide) were acceptable drug delivery devices for a sustained-release dosage form of drug.