• Journal of the KSME
• /
• v.32 no.1
• /
• pp.4-17
• /
• 1992

이 글에서는 복합적층판의 역학적 특성인 층간분리, 모재균열, 초기파손 후의 거동에 대한 문헌을 간단히 서술하고 그 특성을 살펴 보았다. 이상에서 살펴본 바와 같이 이방성인 층으로 구성된 복합적층 구조의 역학적 특성은 균질인 단일구조와 달리 각층의 재료상수가 달라층과 층 사이의 층간응력이 존재하여 층간분리현상이 발생하지 않도록 섬유방향뿐만 아니라 적층순서를 중요한 설계변수로 고려하여야 한다. 또한 모재균열로 인한 기계적 거동의 변화를 이해하고 초기파손 후의 손상을 고려한 해석을 수행하여 복합적층 구조의 응력해석 및 파손, 강도예측을 한다.

• Composites Research
• /
• v.17 no.5
• /
• pp.39-46
• /
• 2004

In this study, the strength of spatially reinforced composites (SRC) are predicted by using stiffness reduction for each structural element composed of a rod stiffness in each direction and a matrix stiffness proportional to its rod volume fraction. Maximum failure strain criteria is applied to rod failure, and modified Tsai-Wu failure criteria to matrix failure. The material properties composed of the tensile failure strain of a rod, the compressive failure strain of 3D SRC, the tensile and compressive strength of the 3D SRC in the $45^{\cir}$ rotated direction from a rod and the shear strength of the 3D SRC are measured to predict the SRC strength. The strength distributions of the 3D/4D SRC in rod and off-rod direction have the largest and the smallest values, respectively. A variable load step is selected to increase an efficiency of strength distribution calculation. Uniform load step is applied when a load history is needed. The results of compressive strength from analysis and experiment show the 18 % difference though the initial slop is coincident with each other.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.27 no.6
• /
• pp.625-633
• /
• 2014

Mark III CCS plate is considered in this paper to perform its strength assessment. Mark III CCS plate is designed and constructed by stacking various non-metallic engineering materials such as plywood, triplex and reinforced PU foam that are supported by series of mastic upon inner steel hull structure. From the viewpoint of structural analysis, this plated structure is treated as a laminated anisotropic structure. Commercially available general purpose finite element analysis programs such as MSC PATRAN and MARC are used to develop the finite element (FE) model of the Mark III CCS plate. Because of the characteristics of LNG cargo that the Mark III CCS plate deals with, it is subjected to a wide range of temperature variations, i.e. about $-163^{\circ}C$ to $20^{\circ}C$. Different material properties of the Mark III CCS plate at these temperature levels are considered in the FE model. Using the developed FE model, strength assessment procedure is developed incorporating various anisotropic failure criteria such as Hashin, Hill, Hoffman, Maximum stress and Tsai-Wu. The strength assessment is performed within the initial failure state of the Mark III CCS plate and, as a result, failure details such as failure locations and loads are identified.

• Korean Journal of Food Science and Technology
• /
• v.27 no.3
• /
• pp.324-328
• /
• 1995

The changes in the rheological properties of soybean curd upon the processing conditions were measured by the failure test, and analyzed by the stress-relaxation data. Soybean curd coagulated with $CaCl_2$ showed a higher failure stress value than other coagulants such as $MgCl_2,\;CaSO_4\;and\;Glucono-{\delta}-lactone$ (GDL), whereas addition of 0.3% $CaCl_2$ produced higher failure stress value than other concentrations $0.2{\sim}0.6%)$. Also, maximum failure stress of soybean curd was shown at the higher heating temperatures$(95^{\circ}C)$ and greater molding pressures, respectively. Initial and equilibrium stress at the stress relaxation curves showed the same tendency as those of failure test, and magnitude of elastic elements$(E_0,\;E_e)$ and viscous element$({\eta})$ were numerically expressed through simple Maxwell model analysis.

• Composites Research
• /
• v.16 no.5
• /
• pp.45-53
• /
• 2003

The experimental and numerical investigations on the failure characteristics of the secondary bonded composite single-lap joints were performed. The initiations and growths of cracks were observed using CCD camera and acoustic emission sensor during the tension tests of the joint specimens. The structural behaviors of the specimens were predicted by the geometric nonlinear two-dimensional finite element analysis. The three types of observed initial cracks were included in each finite element models and the strain energy release rates of each specimen models were calculated by VCCT(Virtual Crack Closure Technique) technique. The tension tests showed that the initial cracks occurred in the 60∼90% of final failure loads and the major failure modes of the specimens were adhesive failure and the delamination between the 1st and 2nd ply of laminate. The specimens with the thicker bondline had earlier crack initiation loads but higher crack propagation resistance and eventually better loading capability. The delaminations were mostly observed in the thicker bondline specimens. The mode I values of calculated strain energy release rates were higher than the mode II values in the all specimen models considering the three types of initial cracks. The mode I and total strain energy release rates were calculated as higher values in the order of initial crack in the edge interface, comer interface and delamination between the plies of laminate.

• Journal of Welding and Joining
• /
• v.9 no.4
• /
• pp.1-8
• /
• 1991

용접구조물을 그의 사용목적에 적합하게 제작하려면 그의 구조설계와 사용재료의 적절한 선택과 사용성능을 충분히 확보하게 끔 제작과정과 품질보증을 할 수 있는 것이 필요하다. 즉 용접성 (Weldability)을 만족하게 하는 것이다. 구조물의 제작에 있어서 배려하여야 할 것은 구조의 사 용성능의 확보와 안전성인 것이다. 사용성능이란 구조의 강도, 기능 그리고 미관이나 끝내기의 외관적 성능등이다. 우리들의 생활공간에 존재하는 구조물이 한번 파손이나 파괴의 사고가 발 생하면 치명적인 것이 된다. 용접설계 생산과 제작의 기술적인 준비로써 용접구조물을 대상으로 용접가공에 중점을 두어 사용되는 말이다. 용접설계는 구조물과 제품의 용접제작과정을 완전히 지시하고 용접이음에 요구되는 사용성능이 확보 되게 끔 부재배치와 치수등이 선정되고 제작과 검사등의 실제 작업성을 충분하게 고려한 제작계획을 세우는 것을 말한다. 이와 같이 된 용접 설계를 바탕으로 용접기술자가 최적한 용접재료의 용접조건등을 결정한다. 즉 설계와 용접시공은 서로 밀접한 관계를 갖고 있어야 한다. 특히 용접설계의 비교적 초기단계에 속하는 것은 제품 기본계획과 강도해석 그리고 구조설계의 과정에 반드시 용접기술자의 관여가 필요한 것이다. 그리고 설계의 최적화를 위하여는 많은 정보 특히 경험적인 정보와 구조 해석적인 정보가 잘 처리되어야 한다. 오늘날의 CAD의 도입이란 전산기의 처리기술과 graphic기술을 묘미 있게 이 용한 것이라 할 수 있다. 용접구조물의 용접성을 논술하려면 다음과 같이 구분하는 것이 바람 직하다. 1. 용접구조물의 허용강도 2. 동접구조용의 강의 선택 3. 용접시공조건 4. 용접설계 이중 용접 제작과정을 표 1에 나타내었다. 구조물의 용접설계 요구조건으로써, 1)손상, 2)탄성 파손, 3)항복응력, 4)기계적인 불안정성, 5)파괴와 붕괴등을 고려하여야 하며 구조용 강의 선택은 1. 강도(strength) 2.연성(ductility) 3.인성(toughness)을 고려하여 구조물의 설계에 충분히 만 족해야 한다.

• Composites Research
• /
• v.17 no.1
• /
• pp.18-28
• /
• 2004

In order to evaluate the strength of carbody structures of railway rolling stock made of laminated fiber-reinforced composite materials, total laminate approach was introduced. Structural analyses were conducted to check the basic design of hybrid composite carbody structures of the Korean Tilting Train eXpress(TTX) with the service speed of 180km/h. The mechanical tests were also conducted to obtain strengths of composite laminates. The results show that all stress components of composite carbody structures are inside of failure envelopes and total laminate approach is recommended to predict the failure of hybrid composite carbody structures at the stage of the basic design.

• International Journal of Highway Engineering
• /
• v.11 no.4
• /
• pp.95-105
• /
• 2009

This study was conducted to investigate the effects of concrete flexural strength and surface smoothness, which were pay factors of concrete pavements, on pavement performance, and to develop the methodologies to determine the proper allowable ranges according to the magnitudes of those pay factors. The concrete flexural strength was analyzed using the AASHTO, power, and linear fatigue failure models, and the surface smoothness was analyzed for the roughness indices of PSI, IRI, and PrI using the AASHTO model. The analysis results showed that the allowable range of the flexural strength should be determined using the rate between the deficiency and strength, and the penalty should be linearly proportional to the strength deficiency rate because the linear relationship between the strength deficiency rate and the reduction in pavement life was observed. As the initial surface smoothness became better, the smoothness deficiency rate should be larger. The penalty due to the surface smoothness deficiency should also be linearly proportional to the smoothness deficiency rate.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 1998.05a
• /
• pp.57-62
• /
• 1998

구조물이나 기계요소내의 결함이 성장하여 파손(Failure)에 이르는 현상은 공학분야에서 중요하게 평가되어 오고 있다. 반복적으로 변하는 응력에 의하여 결함이 초기 성장을 거쳐 재료의 파손에 이르게 되는 과정인 피로파괴는 파괴역학의 한 중요한 분야이다. 이에, 본 연구에서는 열처리의 특성상 부식환경에 매우 민감한 Al-Zn-Mg-Cu Alloy 7075에 대하여 Peak Aged T65l Tempering을 실시한 Al-Alloy 7075-T65l에 대하여 각기 환경(대기, 물, 해수)의 변화가 부식피로균열성장에 미치는 영향과 부식환경에서의 긴 균열(Long Crack)과 짧은 균열(Short Clark)의 부식피로균열 성장특성을 비교, 고찰하여 초기균열의 잠재시간과 안정성장 시간을 예측하여 구조물의 수명예측 및 안전성 평가에 기여 할 수 있는데 목적이 있다. (중략)

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.6
• /
• pp.112-119
• /
• 1995

Early fracture and cutting force of ceramic tool for hardened STC3 steel was investigated in this study. It was found that early fracture of ceramic tool was mostly occurred before normal wear was progressed beyond a critical cutting speed and normal wear was performed under the critical cutting speed. The relationships among critical cutting speed, which was a cause of early fracture, suggested cutting cross section, that is, maximum thickness of cut and width of cut, and cutting force were examined. The following conclusions were obtained: (1)Critical cutting speed showed a high value in the case of small maximum thickness of cut and large nose radius, but was not influenced by width of cut, (2)Principal, feed and radial force, respectively, showed the proportional value to constant cutting area, width of cut and maximum thickness of cut orderly, (3)Occurrence of early fracture was dependent upon radial force.