• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.5
• /
• pp.886-900
• /
• 1989

The purpose of this paper is to obtain the effect of blankholding force in deep drawing process. Flange deformation is analysed by theoretical approach in order to apply the optimum blankholding force to the blank. As the result, the upper and lower blankholding force is determined in terms of variables in deep drawing process. Experiment are carried out with the high stiffness spring-type blankholder system. Theoretical upper blankholding force are relatively good agreement with experimental result and the range of initial blankholding forces for various materials tested are found by experiment.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.5 no.4
• /
• pp.207-218
• /
• 1997

A new blank design method is introduced to predict the blank shape and the strain distribution in the sheet metal forming process. This method deals with only one step from the final shape to the initial blank using the ideal forming theory. Based on this theory, a three-dimensional membrane finite element code has been developed to design an initial blank in the sheet metal forming process. In this paper, the designs of initial blanks for forming a cylindrical cup, a rectangular cup, and a front fender are presented as examples. Also, it compares the two shapes, the target shape with the shape which is deformed from the initial blank using the FEM analysis code. The results illustrate the information that this direct design code is useful in the preliminary design state.

• Aerospace Engineering and Technology
• /
• v.2 no.2
• /
• pp.133-141
• /
• 2003

When superplastic forming process is employed in manufacturing spherical pressure vessel, the thickness and spherical profile are not constant and varies during the forming process. In the current study, theoretical analysis for the prediction of thickness change was carried out under the consideration of membrane theory which has been employed in Kuglov et. al.'s study. Then the thickness of initial blank to obtain the required thickness at the final forming step, the time vs. pressure profile which yields uniform deformation in blank, and the thickness distribution according to the position at each forming step have been determined. The employed model and the developed analytical code were verified throughout comparing the theoretical predictions at each forming stage with the experimental results shown in literature.

• Journal of Ocean Engineering and Technology
• /
• v.13 no.3 s.33
• /
• pp.21-28
• /
• 1999

In this paper, a finite element method for the determination of initial blank shape in sheet metal forming process will be introduced. The initial blank shape is determined by the only one step from the final to the initial blank. The used finite element inverse method adopted Henky's deformation theory, Hill's anisotropic yield criterion and simplified boundary conditions. Based on this theory. a three-dimensional membrane finite element code was developed. The developed code will be applied to several sheet metal forming examples for the demonstration of its validity.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.3
• /
• pp.320-326
• /
• 2017

Multistage deep-drawing technology is used widely in the production of mobile phone battery cases to improve productivity and economy. To ensure adequate capacity and rigidity, such cases are fabricated as a rectangular cup with a high slender ratio. The multistage deep-drawing of a rectangular cup entails a high slender ratio, and the heights of the product sides may be non-uniform because of the complicated deformation mechanisms. This causes problems in product assembly that affects the surface quality of the case. This study examined a blank shape that minimizes the height variations of the product to resolve the aforementioned problems. Optimization design and analysis were performed to identify the shape that yields the least variation. The long and short sides of an oval blank were set as the design variables. The objective function was set to yield the lowest height difference, and the thickness reduction rate of the product was set to the target range. In addition, the height of the final shape was set as a constraint. The height difference was minimized successfully using the optimized design. The design process of the initial blank for all rectangular shapes can be automated in the future.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.6
• /
• pp.1389-1403
• /
• 1993

A procedure has be developed to optimize the product's tipping position in designing a die face for manufacturing automobile outer panels. Two design requirements are considered in optimizing the tipping position. One is to satisfy that all the points on the product should have a uniform distribution of drawing depths. The other is to guarantee that the user-specified area on the product should first contact with the binder wrap. The problem to satisfy the design requirements described above is analogous to the flatness calculation problem in the area of metrology if some constraints can be imposed. Thus the problem can be solved by the simulated annealing method, which is one of the optimization methods. The developed procedure was tested with the real die face design problem and the usefulness was verified by the diagram of the drawing depth.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.21 no.12
• /
• pp.2055-2067
• /
• 1997

Values of process parameters in sheet metal forming can be estimated by various one-step inverse methods. One-step inverse methods based on deformation theory, however, cause some amount of error. The amount of error is generally increased as the deformation path becomes more complex. As a remedy, a new three dimensional multi-step inverse method is introduced for optimum design of blank shapes and strain distributions from desired final shapes. The approach extends a one-step inverse method to a multi-step inverse method in order to reduce the amount of error. The algorithm developed is applied to square cup drawing to confirm its validity by demonstrating reasonably accurate numerical results. Rapid calculation with this algorithm enables easy determination of an initial blank of sheet metal forming.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.6
• /
• pp.1810-1818
• /
• 1996

A new finite elemetn approach is introduced for direct prediction of bland shapes and strain distributions from desired final shapes in sheet metal forming. The approach deals with the geometric compatibility of finite elements, plastic deformation theory, minimization of plastic work with constraints, and a proper initial guess. The algorithm developed is applied to cylindrical cup drawing, square cup drawing, and fron fender forming to confirm its validity by demonstratin reasonable accurate numerical results of each problems. Rapid calculation with this algorithm enables easy determination of various process variables for design of sheet metal forming process.

• Journal of Ocean Engineering and Technology
• /
• v.13 no.3 s.33
• /
• pp.12-20
• /
• 1999

In this paper, method for mapping a three-dimensional shape into the two-dimensional plane will be introduced. This method is referred to geometric modelling and means a transformation between the flat sheet and final surface. The initial blank shape represents the original configuration of the final shape formed into three dimensional surface. The initial constant constant area mapping hypothesis was used in this paper. This technique will be applied to the basic data for an interactive computer design capable of dealing with typical stamping process, including deep parts and complex shapes.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.2
• /
• pp.450-455
• /
• 2017

A shield connector is an automotive electrical component that is used to connect electrical wiring in a vehicle. This part is made by progressive pressing using a phosphor bronze material with high electrical conductivity. The shape of the product is not complicated, but plastic forming techniques are required, such as deep drawing and bending, as well as shearing techniques such as piercing and notching. The finite element method was used to model the process. The strip layout design stage of the progressive die makes it possible to examine the thickness change, the stability of the forming process, and the spring-back. As a result of this analysis, it is possible to predict the correction values for the tendency of cracks, wrinkles, and incomplete plastic deformation, and to identify possible problems in advance. As a countermeasure against the forming error caused by the drawing process analysis, the drawing shape was modified and applied in the process design. For effective material utilization, a 3D strip layout was designed using an optimized blank shape based on nesting. The results improve the crack stability and spring-back of shield connector products produced through progressive pressing.