• KOMUNHWA
• /
• no.56
• /
• pp.59-91
• /
• 2000

The iron culture have been studied mainly about the initial aspect and the growth of polity grossly on the level of the south Korea or the Yeungnam province. But the iron culture is necessary to study by diachronic and regional approach about the artifact

• Korean Journal of Heritage: History & Science
• /
• v.18
• /
• pp.182-193
• /
• 1985

• Korean Journal of Heritage: History & Science
• /
• v.43 no.3
• /
• pp.48-101
• /
• 2010

This paper estimated the calendar date of pottery with ring-rim(粘土帶土器) with the radiocarbon dating. This was based on archaeological facts with comparing line relations and radiocarbon dates of Yayoi pottery(彌生土器). As a result, I understood that pottery with circle ring-rim(圓形粘土帶土器) appeared in BC 6c, pottery with triangle ringrim(三角形粘土帶土器) appeared at the time in BC 300 . Based on the calendar date and aspect of ironware and pottery in grave, I kept in BC 4c with appearance date of ironware. And I kept in BC 5c with appearance date of the slim bronze dagger culture. Korea and Japan common chronological order were built for the first time based on radiocarbon dates, line relations of pottery with ring-rim and Yayoi pottery. This is the calendar date to date back approximately 100~300 years from the existing the calendar date. Current periodization does not match in the calendar date when I built it newly. Therefore I suggested it as follows. Early iron age is from the first~middle part BC 4c to BC 100. And the latter half of Bronze age is from BC 6c to the front appearance of ironware. Then Songguk-ri type(松菊里式) becomes staudard type of pottery in the middle stage of Bronze age.

• Proceedings of the Korean Information Science Society Conference
• /
• 2000.04a
• /
• pp.92-94
• /
• 2000

자바는 이동성, 호환성, 안정성을 위해서 자바 가상 기계를 이용한 수행 방법을 사용한다. 이는 수행 속도를 저하 시키는 한 요인이다. 그래서, 정적 컴파일 모델과 동적 컴파일 모델과 같은 자바 가상 세계의 성능을 높이기 위한 여러 연구들이 진행되었다. 정적 컴파일 모델은 자바의 특성을 해치며, 동적 컴파일 모델은 초기화 시간이 증가하는 문제점이 있다. 본 논문에서는 디스크 캐쉬 기법을 이용하여 동적 컴파일 모델에서 발생하는 초기화 시간을 줄이는 자바 가상 기계를 구현하였다. SPEC JVM98[1]을 이용하여 Kaffe[2] 와 비교했을 때, 초기화 시간이 2배에서 5배 정도 줄었음을 알 수 있었다.

• The Korean Journal of Quaternary Research
• /
• v.14 no.1
• /
• pp.33-48
• /
• 2000

Vegetation disturbance history of the Korean Peninsula from the Palaeolithic Age to the Koryo Dynasty (1392) has reconstructed by the use of various data sources. Active vegetation disturbance, which has begun during the Neolithic Age, seems to be more widespread on lowland and coastal areas in the early stages, but later expanded into inland areas. The ploughing of a field and the selective cutting of certain trees, such as oak trees, nettle trees and pine trees are noticeable, and eventually caused deforestation during the Bronze Age. The use of iron tools of the Iron Age has enabled the forest clearing to develope the dry fields. During the Three Kingdoms period (BC 57∼AD 918) extensive deforestation has maintained for the development of cultivated fields, as well as other activities, such as timber, lumbering, production of iron farm implement, ploughing by cattle. The encouragement of disafforestation on mountain slope and creation of terraced field during the Koryo Dynasty (918∼1392) has caused the deforestation over the country, along with the consumption of large amount of wood and timber for fire-wood, ship-building, mining, xylography and so on.

• Korean Journal of Mineralogy and Petrology
• /
• v.34 no.4
• /
• pp.219-226
• /
• 2021

We examined component analysis and lead isotope ratio analysis to find out the relationship between the excavation and the production site of 25 bronze weapons from prehistoric ages. All 25 bronze weapons are ternary alloys of copper-tin-lead and lead is artificially added. The lead isotope ratios of 25 bronze weapons show that bronze are made by raw materials in the southern regions of the Korean Peninsula, including northern China. The raw materials of narrow-shaped bronze dagger are supplied in zone 1-3 and northern China. In addition, provenance of lead for bronze halberd and pearhead are the rest of the region except for zone 1 and zone 4. Silver are enriched in most samples and zinc and cobalt are deficient. Arsenic and antimony detected only specific samples and can be used as critical parameter for provenance study. Lead isotopes and trace elements of archaeological bronzes will provide conservation scientist with useful tool to study the provenance of raw materials

• Journal of the Korean Magnetics Society
• /
• v.8 no.2
• /
• pp.57-61
• /
• 1998

The complex magnetic susceptibility of as-quenched and proton irradiated amorphous ribons of $FE_{81}B_{13.5}Si_{3.5}C_2$ was measured in the frequency range 10 KHz~ 10 MHz. The frequency spectra of real and imaginary parts of susceptibility showed a typical Debye-type relaxation. Relatively high relaxtion frequency, ~3 MHz observed in the present work suggented that domain rotation is involved in the relaxation process. The susceptibility at the low frequency decreased with the irradiation, while that at high frequency increased due to the increasing defect density. The relaxation frequency of domain roation shifted toward higher frequency, due to the increasing pinning force against domain motion by the irradiation.

• 한국문화재보존과학회:학술대회논문집
• /
• 2002.02a
• /
• pp.45-52
• /
• 2002

본 연구에서는 KaOH, $K_2CO_3$, Sodium, 그리고 1차 이온수 용액의 $Cl^-$ 이온 추출량과 부식생성물의 생성순위, 부식물 생성, 그리고 부식물 제거에 관하여 관찰하였으며 이 연구로 아래와 같은 결과를 얻었다. $Cl^-$ 이온 추출량에 대한 실험 결과 NaOH은 탈염 초기에는 Cl- 이온을 잘 추출시켰으나 탈염 횟수가 증가하면서 $Cl^-$ 이온의 추출량이 급감하였다. 또한 유물 중량 변화에도 감소폭이 가장 심하였다. $K_2CO_3$은 NaOH나 1차이온수 용액과 비교해 보면 이 방법은 탈염처리동안 $Cl^-$ 이온을 꾸준히 추출시켜 주었으며 다른 탈염용액에 비해 유물 중량변화가 거의 관찰되지 않았다. Sodium 용액은 $K_2CO_3$ 용액과 마찬가지로 탈염처리 동안 $Cl^-$ 이온을 꾸준히 추출시켰으며 다른 탈염 용액에 비해 $Cl^-$ 이온 추출량이 가장 많았다. 하지만 이 용액은 약품 내에 불순물인 $Cl^-$ 이온을 $3\~5\;ppm$을 기지고 있어 보존처리자가 탈염처리를 할 때 좀 더 신중하게 생각해야 할 것 같다. 1차 이온수 용액은 부식인자가 $Cl^-$이온을 완전하게 제거해주지는 못하였지만, pH가 $7.5\~7.9$로 다른 탈염 용액에 비해서 전위차가 낮으며, 별도로 탈알칼리 처리를 하지 않아도 되기 때문에 유물손상은 극소화할 수가 있다. 따라서 이 용액은 부식이 매우 심한 철제 유물이나 균열이 많은 주조 철편과 같은 유물을 처리할 때 적절한 용액이다. 부식생성물 관찰에서는 출토 철기 유물에 생성된 부식물은 주로 인철광$(\gamma-FeOOH)$, 침철광$(\alpha-FeOOH)$, 적금광$(\beta-FeOOH)$, 그리고 자철광$(Fe_3O_4)$이다. 인위적 부식에서는 전부 인철광의 부식물이 생성되었고 자연적 부식에서는 모두 침철광의 부식물이 생성되었다. 특히 철제 표면에 자연적으로 생성된 공식 녹을 XRD 분석한 결과 적금광으로 동정되었다. 이런 모든 시편들을 각 탈염방법에 따라 탈염처리한 후 XRD와 SEM-EDS으로 분석한 결과 인철광과 침철광은 어떠한 변화도 보이지 않았고, 다만 적금광으로 동정된 시편만이 잔존하지 않았다. 철기 제작별 $Cl^-$ 이온 추출량과 탈염효과에 대한 비교 실험은 이온 크로마토그래피 분석 결과와 마찬가지로 단조 철제유물이 주조 철제보다 $Cl^-$ 이온을 많이 가지고 있었으며, 탈염 처리 후에는 $Cl^-$ 이온은 전혀 발견되지 않았다. 이상의 결과 $K_2CO_3$와 Sodium 용액은 탈염처리에서 가장 적합한 탈염처리 용액으로 알수가 있었으며 특히 어떠한 탈염 용액으로 유물을 처리한다 해도 철제유물에 생성된 부식물은 제거되지 않는다는 것을 알게 되었다. 따라서 보존처리자는 유물 표면의 부식 상태만을 보고 처리하기 보다는 철기제작물로 고려하여 처리하는 것이 필요하다. 또한 금속에 부식을 야기시키는 $Cl^-$ 이온과 부식물을 완전하게 제거하여 탈염처리를 하는 것이 유물 부식을 최대한 지연시킬 수 있는 것이라 생각된다.

• Journal of Conservation Science
• /
• v.32 no.2
• /
• pp.101-108
• /
• 2016

Lead isotope ratio of bronze artifacts excavated from Dongchon Site in Sunchang have determined by TIMS. As results of comparison lead isotope ratio of bronze objects with the provenance data of galenas of Korea, China, and Japan, the provenance of three material of bronze objects were turned out to originate from the southern and northern part of China. On the other hands, data were plotted either in zone 3 of the South Korean galena map. The results of these scientific analysis of bronze objects can be used as basic data in comparison researches on manufacturing technology, provenance of bronze objects to be found in the future.

• Korean Journal of Construction Engineering and Management
• /
• v.14 no.3
• /
• pp.12-21
• /
• 2013

Total Project Cost Management System(TPCMS) was introduced with the purpose of increasing the efficiency of cost control for public construction project in 1994. In this paper, general perception of participants of the public construction project on the TPCMS was examined, and the problems in implementing the TPCMS was figured out through expert interviews and survey. Then better ways to implement the system were drawn based on the problems. To effectively manage the cost of public construction project, basically project cost should be estimated accurately in planning stage and managed based on it to have a project complete within the budget. In addition, the cost need to be managed in more systematic ways in terms of data collection and analysis, and the autonomy in managing the project cost given to the project owner needs to be expanded. Most of all, proper budget should be provided to prevent a project from delay through setting the priority of projects and proper budget allocation based on the priority.