• Journal of the Korean Applied Science and Technology
• /
• v.30 no.2
• /
• pp.339-347
• /
• 2013

Nano-emulsions are submicron sized emulsions that are under extensive investigation as drug carriers for improving the delivery of therapeutic agents. The aim of this research is to investigate the stability of nano-emulsions containing polymers. Nano-emulsions containing high concentrations of Carbopol 941, Aristoflex AVC, Aronbis M, Permulen TR 2 and Aculyn 44 were unstable compared with macroemulsions with polymers. The size of emulsion droplet manufactured by adding polymer before emulsification were larger than that of emulsion manufactured by adding polymer after the emulsification. The stability of nano-emulsion containing a low concentration of polymer was also decreased, however the effect was lower than that in the high concentration of polymer. Under similar viscosity of polymer, the sequence of unstability was Aristoflex AVC < Carbopol 941 < Permulen TR2 < Carbopol 941 + Aculyn 44 < Aronbis M.

• International Journal of Highway Engineering
• /
• v.8 no.1 s.27
• /
• pp.77-87
• /
• 2006

Dynamic stability (DS) in the wheel tracking (WT) test is used as a basic index of rut-resistance for asphalt mixtures. In general, the deeper rut depth is obtained from the weaker mixture, resulting in the lower DS value. On the other hand, the shallower rut depth is obtained from the stronger mixture, resulting in the higher DS. However, it is not always the case when the DS is calculated by the existing method because the DS is simply determined based on the slope at the final stage of the rut depth-cycle curve. Specifically, in the case of the depth-cycle curve showing a steeper slope in the early part but flatter slope in last part, the DS is calculated to be higher than the curve showing a ever-increasing slope throughout the test. As long as the last part of slope is flatter, the deeper final rut depth is evaluated to show a higher DS than the little final rut depth. Therefore, a reasonable method for DS evaluation need to be established. Several new methods were suggested by considering the early, middle and final parts of rut depth to determine a reasonable DS. The results have shown that those new methods have demonstrated a significant improvement in distinguishing similarly performing mixtures. The result also showed that $DS_2$ had better correlation with SD than any other methods , representing the rutting resistance of asphalt mixture very well. The new DS calculation method is relatively simple and easy to follow. More validatin study is required for practical application.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.26 no.2
• /
• pp.97-109
• /
• 2010

Purpose : This study was designed to evaluate the influence of implant abutment materials on detorque value and screw joint stability before and after dynamic fatigue test. Materials & Methods : The external hexagonal fixture and three different groups of abutment (titanium abutments, zirconia abutments, and UCLA abutments) were used. The detorque value before loading and after loading (cyclic loading up to $10^5$ cycles) of the abutment screw were measured. Result : 1. There was no significant difference in detorque value before loading among the each group. 2. There was no significant difference in detorque value after loading among the each group. 3. Detorque values before and after cyclic loading in each group were not significantly different. 4. There was no significant difference in loss percentage of removal torque before loading among the each group. 5. There was no significant difference in loss percentage of removal torque after loading among the each group. 6. There was no significant difference in loss percentage of removal torque according to loading among the each group. Conclusion : Short term screw loosening of three types of abutment was not significantly different. When bite force was applied, there was no significant difference in screw loosening between before loading and after loading.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.5
• /
• pp.99-106
• /
• 2006

In this paper, implementation of active mufflers using multiple channel adaptive IIR filter is presented. Usually, recursive LMS(RLMS) algorithms for adaptive IIR filters are highly efficient than filtered-X LMS(FXLMS) algorithms, when the order of both algorithms are the same. However, RLMS algorithms usually diverge before the algorithms arenot yet converged. So, the prefilters are presented to improve the stability by pulling the poles of feedback control transfer function in the beginning of active noise control and returning the original poles after the filters converge. The engine noises of diesel engine automobiles and gasoline engine automobiles are analyzed and the mathematical model of an active muffler is derived. Computer simulations and experiments are performed to show the effectiveness of the proposed systems.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.78-78
• /
• 2023

기후변화 위기는 유사 이래 인류가 직면한 가장 큰 도전으로 범정부적 글로벌 문제로서 이를 해결하기 위한 다양한 정책들이 범국가 차원 혹은 세계적 기업들에 의해 발표 혹은 시행되고 있다. 이러한 기후변화위기와 탄소배출 저감을 위한 대표적인 대응 방안 중 하나가 바로 재생에너지의 확대·보급 노력이다. 그러나 재생에너지는 날씨와 계절 등 자연환경의 영향을 받는 에너지원으로써 간헐성, 변동성을 가지므로, 시간대별 발전량 예측과 전력공급 안정성에 어려움이 있다. 이러한 문제를 해결하기 위하여 재생에너지 발전은 석탄화력 발전과 달리 전력의 수요와 공급의 균형을 위한 에너지저장장치(Energy Storage System, 이하 ESS)가 있어야 한다. ESS는 전력공급 안정성 향상과 전력 수급의 유연성을 제공하는 장점이 있지만, 초기 설치비용이 높은 단점이 있다. 특히, 배터리 기반 ESS의 경우 높은 구축 비용과 한정적인 충. 방전수명으로 인하여 대용량 ESS로써의 역할 수행에는 분명한 한계가 있다. 하지만 재생에너지와 연계한 ESS로 양수발전댐을 활용할 경우 장주기, 장수명, 대용량 에너지 저장에 매우 합리적인 수단으로 판단되었다. 다만, 양수발전 댐 구축에는 토목공사로 인한 환경 훼손이라는 문제점도 존재한다. 본 고에서는 지역 분산형 소규모 양수발전(Pumped Storage Hydropower, 이하 PSH)댐 구축 및 운영기술 개발을 통해 지역 전력공급과 전력 수급을 조절하면서 변동성 재생에너지를 안정적으로 사용할 수 있는 방안을 소개하고자 한다. 특히, 해당 기술은 지역별 특성에 맞춰 유연하게 설치할 수 있으며, 대규모 토목공사로 의한 환경적 부작용을 최소화할 수 있다. 또한 소규모 PSH는 지역의 저수지 및 수자원을 이용하여 에너지를 저장함으로써 변동성 큰 재생에너지의 유연화 대응과 동시에 안정적인 에너지 공급이 가능하다. 본 고에서는 재생에너지의 확대·보급에 따른 문제점과 대표적 ESS 기술들을 분석·소개한다. 지역분산형 소규모 PSH 기술개발 연구기획 내용 소개를 통하여 전력 생산 및 공급의 탈중앙화를 달성하고, 지역별 변동성 재생에너지의 안정적 활용과 지역 전력공급 특성 및 전력 수급에 대응할 수 있는 방안을 제안하고자 한다.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2002.03a
• /
• pp.773-778
• /
• 2002

강우시 불포화 자연사면의 파괴메커니즘을 규명하기 위하여 사면내 모관흡수력의 변화를 고려한 안정해석을 수행하였다. 사면에는 강우계, Tensiometer, Pizometer, Water mock, 경사계 등이 설치되었으며 강우시 사면내 부간극수압과 임시지하수위의 거동을 관찰하였다. 실내실험으로부터 불포화 사면의 안정해석을 위하여 입력 값으로 사용되는 불포화투수계수, 불포화강도정수를 시료의 No.200체 통과량과 건조밀도를 기준으로 경험계수를 이용하여 추정 사용하였다. 강우의 침투로 인한 사면내 부간극수압의 분포는 계측값과 수치해석결과가 차이를 보였으며 이는 불포화 흐름시 흙속의 공기의 영향, 강우의 나무와 수풀에 의한 중간차단효과 및 증발의 영향을 해석에 고려하지 못했기 때문으로 사료된다. 사면안정해석결과 강우초기 모관흡수력을 고려하는 경우 약 10%의 안전율의 증가를 나타냈으며, 침투가 진행되면서 그 차이는 좁아져 임시지하수위가 표층까지 도달했을 때 흡수력을 고려하지 않는 해석과 안전율은 일치하였다.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.174-179
• /
• 2002

The cable stayed roof structure of Jeju worldcup stadium is erected with correct prestressed force that is required by the structural engineer who designs this structure. This study evaluated and adapted the erection process of cable, the erection force and the measurement of cable force for Jeju worldcup stadium. The process of erection is required not only to calculate election force but also to check structural stability, post process, construction period and using cranes. Considering the site conditions and technical problems, this study can attain successfully the erection of cable stayed roof structure of Jeju worldcup stadium with allowable errors.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.14 no.1
• /
• pp.7-13
• /
• 2000

It is important to decide the best beneficial lighting system in the space when we design the lighting at first stage. A Worksheet to simplify the evaluation of the economics of the lighting system was developed. And it was applied to a general office room for each lamp and ballast combinations, and to a factory room with a high ceiling for each HID lamp systems. When we design the lighting system using the Worksheet, we can easily evaluate the economics through converting the total cost invested on the lighting system to the present value or the annual cost.

• Journal of Life Science
• /
• v.20 no.11
• /
• pp.1656-1661
• /
• 2010

Alkaline protease for the hydrolysis of egg yolk protein was immobilized on five carriers - Duolite A568, Celite R640, Dowex-1, Dowex 50W and Silica gel R60. Duolite A568 showed a maximum immobilization yield of 24.7%. Optimum pH for the free and immobilized enzyme was pH 8 and 9, respectively. However, no change was observed in optimum temperature ($50^{\circ}C$). Thermal stability was observed in immobilized enzymes compared to free enzymes. The immobilized enzyme retained 86% activity after 10 cycle operations in a repeated batch process. The effect of flow rate on the stability of enzyme activity in continuous packed-bed reactor was investigated. Lowering flow rate increased the stability of the immobilized enzyme. After 96 hr of continuous operation in a packed-bed reactor, the immobilized enzyme retained 83 and 61% activity when casein and egg yolk were used as a raw materials, respectively.

• Tunnel and Underground Space
• /
• v.17 no.2 s.67
• /
• pp.90-101
• /
• 2007

With increasing development of underground space, underground pumped storage power plants, which generate power by felling water in upper reservoir to lower reservoir, have been continuously constructed. For efficient and safe design, construction and maintenance or such power plants, it is very important to understand in-situ stress and the mechanical properties of the surrounding rock mass at the design stage. The power plant presented in this paper is under construction at a depth of $320{\sim}375m$. For stability evaluation of the structure, in-situ stress was measured by over-coring method. Also pressurementer test and a series or laboratory tests were performed to obtain the mechanical properties. Numerical analyses were conducted to check the efficiency of designed support patterns. The results showed that unstable areas occurred partly in the numerical model, and therefore supports were additionally applied. Finally complete stability was obtained and the following excavation has been operated successfully until now.