• Proceedings of the Korean Nuclear Society Conference
• /
• 1997.10a
• /
• pp.407-412
• /
• 1997

현재 개발이 진행중인 차세대원전의 MMIS 설계는 기존 원자력발전소와 달리 Compact Workstation 개념을 적용하고 있다. 그리고 차세대 원전 Compact Workstation의 설계 개념에 따르면, 안전 계통과 비안전 계통 모두를 동일한 제어기 (Soft Controller)로 제어하는 방식을 고려하고 있다. 따라서 Compact Workstation 고장시에 발전소를 안전하게 정지시키고 그 상태를 유지하기 위해서 Safety Console이 필요하며, 본 연구에서는 차세대원전의 MMIS 설계 개발의 일부로서 주제어실에 설치될 Safety Console을 설계하기 위하여, 우선적으로 Safety Console의 기능을 정의하고 안전 기기 제어 능력 그리고 디지탈 기기를 사용하는 데에 따른 공통모드고장 대처 방안을 평가하였다. 그 평가 결과로서 Safety Console에 대한 설계 기준 및 초기 설계 방향을 제안한다.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1994.11a
• /
• pp.43-47
• /
• 1994

화학 열펌프 시스템의 반응기 설계를 위하여 정적 설계의 결과를 이용하여 시간에 따른 전화율, 온도, 압력, 출력 등의 변화에 대한 모사를 시도하였다. 정적 모사를 통한 설계결과는 동적 거동 모사의 결과와 유사하였으며, 이로부터 정적모사가 동적모사를 위한 적절한 초기치와 기초 설계 정보를 제공함을 알 수 있었다. 본 연구를 통하여 확립된 설계절차와 해석방법에 따른 사례연구를 통하여 향후 실용화될 화학 열펌프 시스템의 개략적인 사양과 바람직한 설계방향을 제시 할 수 있었으며, 반응기의 조작에 따른 제어변수의 영향을 평가하는 기준을 마련할 수 있었다.

• Journal of Korean Society of Steel Construction
• /
• v.16 no.2 s.69
• /
• pp.181-190
• /
• 2004

A new inelastic design method performing iterative calculations using secant stiffness was developed. Since the proposed design method uses linear analysis, it is convenient and stable in numerical analysis. At the same time, the proposed design method can accurately estimate the inelastic strength and ductility demands of the members by performing iterative calculation. In the present study, the procedure of the proposed design method was established. Design examples using the proposed method were presented, and its advantages were highlighted by comparisons with existing design methods using elastic or plastic analysis. Unlike the existing inelastic design methods performing the preliminary design on the structure and checking its validity using nonlinear analysis, the proposed integrated analysis-design method can directly calculate the strength and ductility demands of each member. In addition, the proposed design method can address the inelastic design strategy intended by the engineer, such as strength and ductility limits of members and the design concept of strong-column and weak-beam. As a result, economical and safe design can be achieved.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.4
• /
• pp.344-350
• /
• 2013

It is essential to consider geometry in the early design stage for rational design decisions. However, a crucial decision had been taken by conversation, physical model, and gesture rather than BIM mode which can analyze geometry efficiently. This research proposes the framework of interaction between BIM model and physical model for real-time BIM analysis. Through this real-time system framework of two models, architects can adopt BIM data at early design stage to review analysis of BIM model. It should facilitate dynamic design based on rich BIM information from an early stage to a final stage.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2003.10a
• /
• pp.53-58
• /
• 2003

In recent years, the need for multi-stage gear drives, which highly reduce output speed, has been increased. However, the design of multi-stage gear drives have been carried out by a limited number of experts. The consideration for the direction of input and output axes also makes their design very difficult. The purpose of this study is to develop an algorithm for automatically generating complex multi-stage gear drives and to implement a design supporting system for multi-stage gear drives. There are 4 stages in the proposed algorithm, and major design parameters,.such as the direction of input and output axes, reduction ratio, etc. are set up in the first stage. In the second stage, all mechanisms are generated, and various rules are applied to select feasible mechanisms. In the third stage, the gear ratio of each stage is divided from total gear ratio. Next, the specifications of gears for feasible mechanisms are calculated and their bending strength and surface durability are estimated. In the forth stage, appraised indexes are calculated and provided to support the estimation of the generated gear drives.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.14 no.4
• /
• pp.41-48
• /
• 2005

In recent years, the need for multi-stage gear drives which highly reduce output speed has been increased. However, the design of multi-stage gear drives has been carried out by a limited number of experts. The consideration for the direction of input and output axes also makes their design very difficult. The purpose of this study is to develop an algorithm for automatically generating complex multi-stage gear drives and to implement a design supporting system for multi-stage gear drives. There are 4 stages in the proposed algorithm, and major design parameters, such as the direction of input and output axes, reduction ratio, etc. are set up in the first stage. In the second stage, all mechanisms are generated, and various rules are applied to select feasible mechanisms. In the third stage, the gear ratio of each stage is divided from total gear ratio. Next, the specifications of gears for feasible mechanisms are calculated and their bending strength and surface durability are estimated. In the forth stage, appraised indexes are calculated and provided to support the estimation of the generated gear drives.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.9 no.5
• /
• pp.490-495
• /
• 1999

In this paper. a learning method VoD-EBP for neural networks is proposed, which learn patterns by error back propagation. Based on Voronoi diagram, the method initializes the weights of the neural networks systematically, wh~ch results in faster learning speed and alleviated local optimum problem. The method also shows better the reliability of the design of neural network because proper number of hidden nodes are determined from the analysis of Voronoi diagram. For testing the performance, this paper shows the results of solving the XOR problem and the parity problem. The results were showed faster learning speed than ordinary error back propagation algorithm. In solving the problem, local optimum problems have not been observed.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.10
• /
• pp.2608-2617
• /
• 1999

One of the most important functionality that commercial video storage servers should provide is to maximize the number of concurrent streams and to minimize the initial latency of new requests. In this paper, we propose a data placement scheme whose disk read unit size can be twice large than that of conventional striping methods. The proposed scheme can significantly increase the number of concurrent streams, since the ratio of rotational latency time is decreased and the disks are effectively utilized. The disk scheduling scheme we propose guarantees constant initial latency time. We also propose a procedural design method for a storage server by introducing the concept of allowed initial latency. The comparison with previous research shows that the proposed scheme provides better performance.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.25 no.1
• /
• pp.73-80
• /
• 2012

It is important to design the optimal shape in the initial process because the influences on the design and construction are large according to the shape and pattern of spatial structures. However, the existing optimal shape designs for spatial structure are performed by the designer's intuition and experiences. Therefore, this study proposes the integrated process using the topology optimization and cellular automata model. First, the initial optimal shapes are obtained by using the topology optimization, and then the spatial truss structural patterns are created through the application of cellular automata rules. Finally, the optimal shapes to satisfy the various design conditions are generated by the structural analysis and size optimization.

• Journal of the Society of Naval Architects of Korea
• /
• v.35 no.4
• /
• pp.98-108
• /
• 1998

Hull design data is currently prepared by a 2D CAD system and re-input to 3D CAD systems specialized for detail design or to a structural analysis system. In this paper, sharing design data among different CAD systems has been studied. Based on STEP methodology, a neutral model is generated from 2D AutoCAD drawings. To handle a geometric data of this model, the non-manifold model of ACIS is used because it can support various CAD data representation such as 2D graphic entities, 3D wireframe, 3D surface model, and solid B-Rep/CSG model. It is observed that a mon-manifold model can easily be transformed to a 3-D wireframe model for the hull detail design system AutoDef or a FE model for the structural analysis system Nastran.