Generation and Preliminary Design of Compound Multi-Stage Gear Drive Mechanisms

복합 다단 기어장치 메커니즘의 생성 및 초기설계

  • 정태형 (한양대학교 기계공학과) ;
  • 김장수 (한양대학교 대학원 기계설계학과) ;
  • 박승현 (한양대학교 대학원 기계설계학과)
  • Published : 2005.08.01

Abstract

In recent years, the need for multi-stage gear drives which highly reduce output speed has been increased. However, the design of multi-stage gear drives has been carried out by a limited number of experts. The consideration for the direction of input and output axes also makes their design very difficult. The purpose of this study is to develop an algorithm for automatically generating complex multi-stage gear drives and to implement a design supporting system for multi-stage gear drives. There are 4 stages in the proposed algorithm, and major design parameters, such as the direction of input and output axes, reduction ratio, etc. are set up in the first stage. In the second stage, all mechanisms are generated, and various rules are applied to select feasible mechanisms. In the third stage, the gear ratio of each stage is divided from total gear ratio. Next, the specifications of gears for feasible mechanisms are calculated and their bending strength and surface durability are estimated. In the forth stage, appraised indexes are calculated and provided to support the estimation of the generated gear drives.

Keywords

References

  1. Chong, T. H., Bae, I. H., and Kim, H., 1997, 'Development of Design Support System for Gear Systems'(in Korean),' Transactions of KSME, Vol. 21, No. 9, pp. 1373-1384
  2. Chong, T. H. and Baek, J. H., 1997, 'Development of Durability Estimation and Design Systems of Worm Gears(in Korean),' Transactions of the KSAE, Vol. 5, No 1, pp. 207-216
  3. Chong, T. H., Bae, I. H., and Lee, S. J., 1999, 'Design Method for Multi-Stage Gear Drive,' Proc. of the KSMTE Autumn Conference, pp. 470-475
  4. Chong, T. H. and Bae, I. H., 2002, 'New Methods to Split Overall Gear Ratio of the Cylindrical Multi- Stage Gear Train,' Proc. of the KSMTE Spring Conference, pp. 687-692
  5. Townsend, D. P., 1992, Dudley's Gear Handbook, 2nd ed., McGraw-Hill Inc
  6. Dudley, D. W., 1984, Handbook of Practical Gear Design, McGraw-Hill Inc
  7. Japan Gear Manufacturers Association(JGMA), 1991, New Gear Handbook(in Japanese)
  8. American Gear Manufacturers Association(AGMA), 1988, Fundamental Rating Factors and Calculation Methods for Involute Spur and Helical Gear Teeth, 2001-B88
  9. American Gear Manufacturers Association(AGMA), 1989, Geometry Factors for Determining the Pitting Resistance and Bending Strength of Spur, Helical and Herringbone Gear Teeth, 908-B89
  10. American Gear Manufacturers Association(AGMA), 1988, Rating the Pitting and Bending Strength of Generated Straight Bevel, ZEROL Bevel, and Spiral Bevel Gear Teeth, 2003-A86
  11. American Gear Manufacturers Association(AGMA), 1988, Design Manual for Bevel Gears, 2005-B88
  12. American Gear Manufacturers Association(AGMA), 1986, Rating and Application of Single and Multiple Reduction Double-Enveloping-Worm and Helical-Worm speed Reducers, 6017-E86
  13. American Gear Manufacturers Association(AGMA), 1992, Practice for Enclosed Cylindrical Wormgear Speed Reducers and Gear-motors, 6034-B92
  14. Chong, T. H., and Bae, I. H., 2002, 'New Methods to Split Overall Gear Ratio of the Cylindrical Multi-Stage Gear Train,' Transactions of KSMTE, Vol. 11, No 6, pp. 45-51, 2002