• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.1
• /
• pp.68.1-68.1
• /
• 2012

CIBER 2(Cosmic Infrared Background ExpeRiment 2)는 CIBER1의 후속과제로 진행되는 사업으로써 적외선 기기를 NASA Sounding Rocket에 탑재하여 0.5-2.1${\mu}m$ 파장대의 적외선 우주배경복사를 관측하고 실험하는 과제이다. CIBER 2는 NASA에서 공식 승인되어 진행되고 있는 사업이며, 미국의 Caltech, 한국의 KASI, 일본의 ISAS/JAXA가 국제협력으로 진행하는 과제이다. 한국의 KASI는 반사경의 광학계 및 광기계부 개발, 전자부 개발에 참여하고 있다. CIBER 2의 광학계는 카세그레인 방식으로써 주경의 직경은 300mm이다. CIBER 2는 77K로 냉각되어 적외선우주배경복사를 관측하기 때문에 특히, 열수축에 의한 영향을 고려하여 설계, 제작, 조립이 되어야 한다. 또한, 광학계 구조물이 조립되는 로켓의 내경이 400mm이기 때문에 광학계 구조물의 직경에 제한이 따른다. 본 발표에서는 KASI가 주도적으로 개발 중인 반사경 마운트와 광학계 구조물의 초기설계와 광기계 해석결과들에 대해서 논한다.

• Proceedings of the KIEE Conference
• /
• 2006.07b
• /
• pp.665-666
• /
• 2006

BLDC 모터는 전자적인 스위칭에 의해 전류(轉流)가 수행되므로 정상적인 동작만을 고려하여 모터 드라이버를 설계한 경우에는 초기 기동에 실패하는 사례가 빈번히 발생한다. 그 원인은 대개의 참고문헌이나 기술자료에서 초기 기동에 관한 요구사항은 찾아보기 매우 힘들고 전자부품의 특성상 사용자는 제조자가 서로 다른 다수의 부품을 조합하여 회로를 구성해야 하기 때문이다. 본 논문에서는 저자가 경험한 개발 사례를 중심으로 초기 기동실패의 원인분석과 그 해결책을 소개한다. 논문의 지면관계상 구체적인 이론에 근거한 기술보다는 회로설계에서 경험하는 실용적인 노하우를 중심으로 간추려서 소개한다.

• Journal of Korean Society of Steel Construction
• /
• v.17 no.3 s.76
• /
• pp.285-294
• /
• 2005

Drift design is one of the core techniques in the structural design of high-rise buildings and resizing technique is regarded as a practical drift design method for high-rise buildings. In the resizing technique, the structural weight is re-distributed to minimize the target displacement without a change in structural weights. However, the structural weight determined from resizing algorithm is bound to the structural weight based on the preliminary design. Therefore, in this paper, a drift design method that can control the weight of the structure without causing drift control performance to deteriorate is proposed by incorporating the weight control factor in the formulation of resizing algorithm. The proposed drift design method is applied to the drift design of two frame-shear wall systems. The proposed drift design method, in this study, makes it possible to control both the drift and weight of a high-rise building.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.7
• /
• pp.863-870
• /
• 2023

Ship capsize accidents are common in coastal waters, particularly involving small fishing boats. To prevent there overturing accidents in small fishing boats, their stabilities must be assessed at the initial design step. However, the available information during the initial design step is limited, posing challenges in performing a reliable stability evaluation. Therefore, this study presents a plan to estimate the transverse metacenter (GM) of small fishing boats using parameters such as KM, KG, and TRIM that can be determined at the initial design step. Stability was evaluated by comparing GM with the minimum transverse metacenter (GMmin) specified in the standard safety evaluation criteria for fishing boats. To calculate the required trim value for hydrostatic characteristics using K-SHIP, a stability assessment program provided by the Korea Maritime Safety and Transportation Corporation, the initial trim state is estimated based on the ship lines using the commercial CFD program STAR-CCM+. GM is then calculated by assessing the hydrostatic characteristics in relation to the boat lines using K-SHIP. Furthermore, the stability of the fully loaded state is compared by subtrcating GM from GMmin. One constructed ship is designated as the standard ship, and the stability assessment method proposed in this study is applied to evaluate stability and validate its effectiveness. Consequently, the representative line of a 4.99-ton fishing boat and nine modular lines models derived from it were evaluated, ultimately identifying a relatively superior stability.

• Aerospace Engineering and Technology
• /
• v.11 no.2
• /
• pp.33-38
• /
• 2012

A LEO Satellite performs automatic initial operations by FSW after separation from a launch vehicle. After initial operation by FSW is finished, preparation for normal operation is performed by ground during bus initial activation and checkout phase. First of all, we check state of health of the satellite including solar array deployment status. After then, each unit of spacecraft bus is activated and checked. After activation and checkout of every units used for normal operation, we check maneuver performance for imaging mission and orbit maintenance performance. Because the Bus IAC is performed during limited ground contact time, every detailed procedure must be designed considering ground contact. Therefore, the Bus IAC procedure is separated into several parts based on ground contact duration. In addition, the procedures for every possible operation including expected situation as results of IAC procedures and unexpected contingency situation must be prepared. The contingency operation is also designed based on ground contact duration. The LEO satellite was successfully launched and the Bus IAC was successfully performed. In this paper, we explain design concepts and execution results of Bus IAC.

• Journal of KSNVE
• /
• v.11 no.2
• /
• pp.180-186
• /
• 2001

자동차의 소음 진동은 파워트레인(엔진과 변속기)과 자동차의 차체 및 이 두 부분 연결하는 프레임의 동력학적인 적절한 조화에 의해서 좌우된다. 따라서 CAE를 이용한 파워트레인 및 차체의 최적 설계가 자동차 개발의 초기 개념 설계단계에는 중요한 역할을 하지만, 이 후 많은 자동차의 부품들이 서로 결합되어 완성되어지는 시작차 단계에서는 초기에 예상하지 못한 문제점들이 발생한다.(중략)

• Computational Structural Engineering
• /
• v.5 no.3
• /
• pp.19-28
• /
• 1992

이 글에서는 막 구조물의 설계에서 자주 제기되는 형상결정 문제에 대한 접근방법을 제시하고자 하였다. 형상결정 문제는 막 구조물이 휨 강성이 전혀 없거나, 빈약한 재료를 사용하는데 기인하여 제기되고, 막 구조물의 설계에서 불안정영역의 발생을 피하기 위해서는 형상의 기준면에서 곡률과 비틀림의 변화를 최소화해야 하며 이러한 변화를 최소화하기 위해서는 형상이 적용하중의 막력에 의한 평형면에 근접하는 것이 바람직하다. 또한, 초기에 막 구조물에 도입된 초기장력에 오차가 발새하면 막면은 스스로 등장력의 형태로 이동하게 되므로, 초기에 막장력의 분포가 등장력의 상태가 되도록 그 형상을 결정하는 것이 바람직하다. 따라서, 이러한 조건을 만족하는 형상탐색문제는 이러한 종류의 구조물의 설계에서는 매우 중요한 문제가 된다. 그러나 국내에서는 막과 케이블 구조물의 형상해석과 응력-변형해석에 범용적으로 사용될 수 있는 프로그램의 개발이 미약하고 이러한 구조방식에 대한 국내의 인식에 크게 부족한 실정이다. 따라서 이 글이 막과 케이블 구조물의 설계에서 형상탐색해석이 반드시 필요한 이 구조물의 구조적 특성을 이해하는데 조금이라도 도움이 될 수 있기를 기대한다.

• Journal of the Society of Naval Architects of Korea
• /
• v.41 no.6
• /
• pp.114-119
• /
• 2004

For passenger vessels, twin shaft types in propulsion system is generally adopted to provide a high-speed performance in low draught due to restricted operating condition in harbors or water channels. Struts of twin open shaft type support the shafts, bearings, and propellers. Therefore, strut design is needed to consider not only hydrodynamic performance but also structural and noise/vibration performance, In this paper, considerations in strut design at the initial design stage have been discussed based on existing references, numerical calculations, and their comparisons. Also, the strut design of a RoPax ferry has been carried out at the initial design stage, for an example.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.1
• /
• pp.262-268
• /
• 2017

The energy consumption of buildings is approximately 20.5% of the total energy consumption, and the interest in energy efficiency and low consumption of the building is increasing. Several studies have performed energy analysis and evaluation. Energy analysis and evaluation are effective when applied in the initial design phase. In the initial design phase, however, the energy performance is evaluated using general level information, such as glazing area and surface area. Therefore, the evaluation results of the detailed design stage, which is based on the drawings, including detailed information of the materials and facilities, will be different. Thus far, most studies have reported the analysis and evaluation at the detailed design stage, where detailed information about the materials installed in the building becomes clear. Therefore, it is possible to improve the accuracy of the energy environment analysis if the energy environment information generated during the life cycle of the building can be established and accurate information can be provided in the analysis at the initial design stage using a probability / statistical method. On the other hand, historical data on energy use has not been established in Korea. Therefore, this study performed energy environment analysis to construct the energy environment historical data. As a result of the research, information classification system, information model, and service model for acquiring and providing energy environment information that can be used for building lifecycle information of buildings are presented and used as the basic data. The results can be utilized in the historical data management system so that the reliability of analysis can be improved by supplementing the input information at the initial design stage. If the historical data is stacked, it can be used as learning data in methods, such as probability / statistics or artificial intelligence for energy environment analysis in the initial design stage.

• Journal of Korean Association for Spatial Structures
• /
• v.11 no.1
• /
• pp.77-85
• /
• 2011

In this study, micro genetic algorithm is used to find an optimum cross section of grid structures with pretension. Design optimization of trusses consists of arriving at optimum sizes of cross-section and prestressing force parameters, when weight of the truss is minimum, satisfying a set of specified constraints. The present approach is verified by ten-bar truss example showing good agreements with previous results. Features of the proposed method, which help in modeling and application to optimal design of pretensioned truss structures, are demonstrated by solving a problem of seventy two bar truss structures. The minimum weight design of seventy two bar truss is performed for various magnitudes of pretension and optimal prestressing forces are also found for various configurations of pretensioned truss structures.