• Research in Plant Disease
• /
• v.12 no.2
• /
• pp.139-143
• /
• 2006

Virion captured reverse transcription polymerase chain reaction (VC/RT-PCR) could detect plant virus quickly and accurately. In the VC/RT-PCR, no antibody is needed unlike immuno-captured RT-PCR (IC/RT-PCR) which had been improved method of RT-PCR for plant viruses, and virus nucleic acids can be obtained easily within 30minutes by property of polypropylene PCR tube which is hold and immobilized viral particles on its surface. For the virion capture of Tomato spotted wilt virus (TSWV), the extraction buffer was tested. The optimum macerating buffer for TSWV was 0.01M potassium phosphate buffer, pH 7.0, containing 0.5% sodium sulfite. The viral crude sap was incubated for 30 min at $4^{\circ}C$. The virions in the PCR tubes were washed two times with 0.01M PBS containing 0.05% Tween-20. The washed virions were treated at $95^{\circ}C$ immediately for 1 min containing RNase free water and chilled quickly in the ice. Disclosed virions' RNAs by heat treatment were used for RT-PCR. Dilution end point of $10^{-5}$ from plant's crude sap infected with TSWV showed relatively higher detection sensitivity for VC/RT-PCR. During multiple detection using two or more primers, interference was arisen by interactions between primer-primer and plant species. The result of multiplex RT-PCR was influenced by combinations of primers and the kind of plant, and the optimum extraction buffer for the multiplex detection by VC/RT-PCR should be developed.

• Korean Journal of Ecology and Environment
• /
• v.35 no.3 s.99
• /
• pp.145-151
• /
• 2002

The effect of low pH on physiological changes was studied with the acidophilic green alga, Clamydomonas acidophila, UTCC 122. The growthrates (${\mu}$) were identical, $0.5{\sim}0.7\;day^{-1}$, at pH 3.7${\sim}$6.7 and no significantly different (ANOVA, p =0.134), showing cell volume reduced gradually as they were growing, whereas that at pH 2.7 was falling to zero and cell volume increased dramatically. Chlorophyll a concentration of the cultures incubated for one day was $191{\sim}255\;pg\;cell^{-1}$, after then it declined from $60{\sim}103\;pg\;cell^{-1}$ at pH 3.7${\sim}$6.7 except $210\;pg\;cell^{-1}$ at pH 2.7, which was directly related with cell volume. External carbonic anhydrase (CA) activity was varied from1.1 to$3.7{\times}10^{-4}\;E.U.\;mm^{-2}$, showing the gradualincrease during culture, except at 2.7 and pH 5.7. However there was not found any relationship among the pH gradient cultures. CA molecular mass of C. acidophila was 29 kBa, and concentration of that was identical in all cultures. The proteins of 41 kDa and 63 were not or very　faintly expressed in low pH cultures, in contrast that of 17 kDa more expressed. In this work, we found that C. acidophila could live optimally within a wide range of acidic pH, and 17 kDa of unidentified protein might be concerned with tolerating in low acid environment.

• Horticultural Science & Technology
• /
• v.33 no.5
• /
• pp.647-657
• /
• 2015

To investigate a method for calculation of the heating load for environmental designs of horticultural facilities, measurements of total heating load, infiltration rate, and floor heat flux in a large-scale plastic greenhouse were analyzed comparatively with the calculation results. Effects of ground heat exchange and infiltration loss on the greenhouse heating load were examined. The ranges of the indoor and outdoor temperatures were $13.3{\pm}1.2^{\circ}C$ and $-9.4{\sim}+7.2^{\circ}C$ respectively during the experimental period. It was confirmed that the outdoor temperatures were valid in the range of the design temperatures for the greenhouse heating design in Korea. Average infiltration rate of the experimental greenhouse measured by a gas tracer method was $0.245h^{-1}$. Applying a constant ventilation heat transfer coefficient to the covering area of the greenhouse was found to have a methodological problem in the case of various sizes of greenhouses. Thus, it was considered that the method of using the volume and the infiltration rate of greenhouses was reasonable for the infiltration loss. Floor heat flux measured in the center of the greenhouse tended to increase toward negative slightly according to the differences between indoor and outdoor temperature. By contrast, floor heat flux measured at the side of the greenhouse tended to increase greatly into plus according to the temperature differences. Based on the measured results, a new calculation method for ground heat exchange was developed by adopting the concept of heat loss through the perimeter of greenhouses. The developed method coincided closely with the experimental result. Average transmission heat loss was shown to be directly proportional to the differences between indoor and outdoor temperature, but the average overall heat transfer coefficient tended to decrease. Thus, in calculating the transmission heat loss, the overall heat transfer coefficient must be selected based on design conditions. The overall heat transfer coefficient of the experimental greenhouse averaged $2.73W{\cdot}m^{-2}{\cdot}C^{-1}$, which represents a 60% heat savings rate compared with plastic greenhouses with a single covering. The total heating load included, transmission heat loss of 84.7~95.4%, infiltration loss of 4.4~9.5%, and ground heat exchange of -0.2~+6.3%. The transmission heat loss accounted for larger proportions in groups with low differences between indoor and outdoor temperature, whereas infiltration heat loss played the larger role in groups with high temperature differences. Ground heat exchange could either heighten or lessen the heating load, depending on the difference between indoor and outdoor temperature. Therefore, the selection of a reference temperature difference is important. Since infiltration loss takes on greater importance than ground heat exchange, measures for lessening the infiltration loss are required to conserve energy.

• Korean journal of food and cookery science
• /
• v.28 no.4
• /
• pp.391-397
• /
• 2012

This study was carried out to investigate commercialization of Kimchi made of cabbage (Brassica oleracea var. capitata L.) using pre-fermentation conditions. The pre-fermentation conditions were 0, 18, 24, and 28 h at $20^{\circ}C$, and then the samples were stored at $10^{\circ}C$ to assess changes in quality characteristics. A comparison of the quality characteristics during storage showed that PF24 (pre-fermented cabbage Kimchi during 24 h at $20^{\circ}C$) and PF28 (pre-fermented cabbage Kimchi during 28 h at $20^{\circ}C$) had pH 4.47 and pH 4.23 on the second day of storage, respectively. It was possible to shorten the fermentation time to less than that of PF0 (not pre-fermented cabbage Kimchi at $20^{\circ}C$), by approximately 3 days. Total acidity was 0.26 to 0.29% immediately after making the Kimchi. However, PF0, PF18 (pre-fermented cabbage Kimchi during 18 h at $20^{\circ}C$), PF24 and PF28 became well-fermented when they were stored for 8~14 days, 3~10 days or 2~3 days. The number of lactic acid bacteria increased with the passage of time in all treatment groups regardless of fermentation conditions. However, the longer pre-fermentation time became, the faster the number of lactic acid bacteria increased. Most samples showed similar results late in the storage period; 7.2~7.4 log CFU/mL. PF0 had the greatest volume change 2.1 times increase late in the storage period. The sensory evaluation showed significant differences for flavor, taste, and overall acceptability after a partial storage period. PF28 stored for 2~3 days showed excellent flavor, and PF24 and PF28 stored for 2~3 days showed the highest scores of 6.27 to 6.67. The PF24 and PF28 treated samples were appropriate for commercializing small packed cabbage Kimchi and for alleviating the expansion problem of the packing material. However, because mass commercial production requires a large number of samples to be used at once, the results should be assessed for industrial product development in the future.

• Journal of Korean Society of Forest Science
• /
• v.76 no.4
• /
• pp.338-347
• /
• 1987

The research was carried out to investigate the related phenomena, the latent structures and synthetical characteristics in various growth factors of Phyllostachys bambusoides Sieb. et Zucc. growing at Damyang gun, Chollanamdo, using multivariate analysis. 1. By synthetical characteristics in canonical correlation between height-growth factor group and diameter-growth factor group, the former was determined by the culm height ($x_1$), and the latter by the. diameter of the largest internode($x_7$). And for those between quantitative growth factor group and qualitative growth factor group, the former was determined by the surface area($x_{10}$), and the latter by the diameter of the largest internode ($x_7$). 2. The ten growth factors of bamboo culm were simplified by two principal components on the basis of accumulated proportion aimed at 90%. The first principal component($Z_1$) as a "size factor" showed high correlation with growth factors except eye-height diameter($x_5$). The second principal component($Z_2$) as a "shape factor" showed high correlation only with $x_5$. 3. The bamboo culm, and the latent phenomenon between their growth factors could be determined by two common factors showing high communality(94.16%). The ten growth factors can be grouped into two attribute factors: quantity and quality. 4. The bamboo culms can be classified into five types: total, volume, shape-quality, inferior and middle.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.44 no.6
• /
• pp.921-927
• /
• 2015

The aim of this study was to investigate the effect of die temperature and repeated extrusion on physical properties of extruded white ginseng (EWG). The die temperature was adjusted to 100, 120, and $140^{\circ}C$, and extrusion was repeated under the same conditions with their corresponding samples. Specific mechanical energy input decreased as die temperature increased during extrusions. The secondary extruded white ginseng (SEWG) at a die temperature of $120^{\circ}C$ showed a higher expansion index than other extrudates. Elevation of both die temperature and repeated extrusion increased the specific length of extrudates. The highest apparent elastic modulus, breaking strength, and water solubility index obtained from SEWG at a die temperature of $100^{\circ}C$ were $7.53{\times}10^8N/m^2$, $7.49{\times}10^5N/m^2$, and 39.02%, respectively. When die temperature increased, water absorption index (WAI) decreased. The WAI of SEWG was higher than that of EWG. In conclusion, repeated extrusion affected physical properties of white ginseng and could be applied to produce improved quality of ginseng products.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.44 no.6
• /
• pp.912-920
• /
• 2015

The study was designed to investigate the effects of die temperature and $CO_2$ injection on the physical and antioxidant properties of extruded rice with tomato flour. Moisture content and screw speed were fixed at 25% and 150 rpm, respectively. Die temperatures and $CO_2$ injection were adjusted to 80, 110, and $140^{\circ}C$ and 0, and 300 mL/min, respectively. Specific mechanical energy input decreased as die temperature increased from 80 to $140^{\circ}C$. The expansion index increased, while bulk density decreased with $CO_2$ injection. All extrudates showed increased water soluble index (WSI) and water absorption index through the extrusion process. WSI increased as die temperature increased. 1,1-Diphenyl-2-picrylhydrazyl (DPPH) radical-scavenging activity and total phenolic compounds increased as die temperature increased from 80 to $140^{\circ}C$. Total carotenoid and lycopene contents decreased through the extrusion process. Total carotenoid and lycopene contents upon 0 mL/min $CO_2$ injection and $140^{\circ}C$ die temperature were highest at $6.65{\mu}g/g$ and 2.69 mg/kg, respectively. In conclusion, $CO_2$ injection affects expansion properties while an increased die temperature leads to increased DPPH radical scavenging activity and total phenols.

• (The)Study of the Eastern Classic
• /
• no.35
• /
• pp.415-445
• /
• 2009

A well-known historian, Ahn Jeong-Bok(Sun-Am, 1712~1791) was an expert on the country village community. He was a scholar of the "Nam-In" group, who was excluded from the corridors of power in those days. He kept on the move in various parts of country villages from his childhood. After settling down in Deok-Gok, Kwang-Ju, he stayed in the place devoting himself to the self-culture and the literary works. By his surrounding of environment, he had an academic interest in a concrete science rather than metaphysics and country villages rather than the central city. He considered the country villages as the link holding between a family and a country and had the conception of a confucianist community based on country villages, emphasizing the practice of confucianist virtues in everyday life. First of all, his confucianist community was the community based on country villages. He thought that the enlightenment was a matter of great importance for solving problems in country villages. As a solution to those problems, he suggested Hyang-Yak, the self-governed regulations of country villages. In his own village he made the self-governed rules Dong-Yak. When he was a provincial governer of Mok-Cheon, he put Hyang-Yak, the self-governed regulations of country villages in operation. It aimed for a kind of gentry-centric country village community. But Hyang-Yak was the regulations based on the agreement with each other, stressed the regard on the popular mind and the setting the pace of the gentry, and aimed for the harmony and order in a community through the practice of moral virtues in daily life. On the other hand, he had a conception of a country village's academic community. He thought of the development of educational intuitions as a pressing need of the enlightenment of country village. With young people he read confucianist books with comments in a village school, Seo-Jae. In his seventies, he made and put the self-regulations for academic community, Hak-Yak, in operations. It is considered that Hak-Yak was an example of his idea of academic community and his point of view on learning, which emphasized on the coincidence with reading and practice.

• Journal of Korean Classical Literature and Education
• /
• no.32
• /
• pp.119-158
• /
• 2016

In this thesis we set forth the reasons for teaching classical river novels in secondary education, and investigated the guiding principles for content design of high school literature textbooks. Although classical river novels have great significance in cultural and narrative histories, they were previously consistently disregarded in secondary education. First, we looked at the need for including classical river novels in the secondary school curriculum to create a well-balanced education of classical novels, to link this with modern river novels, to teach the narrative styles and esthetics of river novels, and to let students understand the various cultures of the late Joseon Dynasty. Second, we examined two ways of educating students about classical river novels. For exclusively teaching classical river novels, we recommended the means of teaching and provided detailed guidelines by which they can be taught, as well as provided complete information about the family tree, the story unit, and the scene deployment. To establish the link between classic river novels and their modern counterparts, we recommended the process of teaching accession and transition of tradition by introducing the commonalities and the differences across three generations stories, besides discussing the viewpoints of female writers. When classical river novels are introduced in literary textbooks, students will realize the existence of such novels though they may not understand all aspects of the novels. We suggest that teaching and introduction of classical river novels in secondary education as soon as possible.

• The Journal of Korean Society for Radiation Therapy
• /
• v.30 no.1_2
• /
• pp.117-128
• /
• 2018

Purpose : To evaluate the usability of plan transfer between TOMO HD and Radixact, we compared the differences of dose in transferred plans by evaluating the dose of normal organ and target. TOMO HDA and Radixact. The completed plans were transferred each other and we compared the differences of dose by evaluating the DVH of each plans. Materials and Methods : We planned 4 different plans assuming the treatment of 2 cases in Head and Neck Cancer and 2 cases Prostate cancer. Each plan was designed so that 95 % of the prescription dose was irradiated over 99 % of the target volume, and the normal organ constraints dose was based on the SMC tolerance dose protocol. Each plan was transferred to each equipment and DVH(dose volume histogram) analysis of the transferred plans was compared and evaluated. Results : The Mean dose of CTV and GTV was increased and decreased in the transferred plans, but there was no significant differences. The target coverage of CTV and GTV was decreased in all cases of transferred plans from TOMO HAD to Radixact, and the change of CI and HI in CTV was within 0.1. Normal organ dose was increased in most cases when transferring from HAD to Radixact in both treatment plans. Conclusion : According to the results of this experiment, the target coverage was above the standard and the normal organ dose was almost same or decreased when transferring the plans from Radixact to HDA equipment. However the target coverage was reduced when transferring the plans from HDA to Radixact and there was an increase in dose in normal organs that could cause sever side effects such as Optic Chiasm ($D_{max}$1.38 Gy), Bladder ($D_{max}$3.07 Gy), Penile Bulb ($D_{max}$1.14 Gy). Therefore, it is necessary to pay attention to the dose change when transferring the plan and one-time transfer due to equipment inspection will be useful for efficient radiation therapy, but if the transferred treatment plans continue for several consecutive days, the treatment plan should be resumed.