• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2009.06a
• /
• pp.109-110
• /
• 2009

"드럼 코아시편 채취장치" 는 침출/내수성 시험, 압축강도 측정시험, 열 순환 시험등 의 파괴적 물성시험을 수행하기 위해서 경질(시멘트 고화체) 및 연질(파라핀왁스) 등의 방사성폐기물드럼으로부터 코아 시료를 채취하는 장비이다, 시편채취의 최대길이는 860 mm 이며 코아 시편의 직경은 50~200 mm 이며 일반적으로 "방사성폐기물 고화체의 물성시험"에 사용되는 시편은 실험실적으로 제조한 소규모 모의 고화체 시편과 고화공정에서 직접 채취한 소규모 시편, 200L 드럼으로부터 코아시편을 채취 가공하여 만든 시편과 같이 3종류가 있다. 고화공정에서 발생되는 고화체는 일반적으로 200 L 드럼에 주입되며, 고화체의 균일성 정도는 고화공정의 특성, 폐기물/고화매질 혼합비, 200 L 고화체 드럼의 냉각방식에 따라 다르다. 따라서, 실험실에서 제조한 시편과 공정에서 채취한 소규모시편은 실제 고화공정을 대표할 없으며 또한 실제 발생된 고화체의 조성과도 동일하다고 볼 수 없다. 따라서 200 L 드럼으로부터 코아시편을 채취하여 만든 시편이 고화공정과 고화체를 대표할 수 있는 시편으로 볼 수 있다 그러므로 고화체 및 고화공정을 대표할 수 있는 코아시편을 채취할 수 있는 장치를 제작하여 다양한 코아시편을 200 L 고화체 드럼으로부터 수직 코아시편을 채취할 필요가 있으며 실험에서 코아시편 채취속도와 연관된 Z-AXIS 의 Rpm은 운전범위는 0-2000 Rpm 이나 이때 너무 빠른 속도는 기계에 치명적인 손상을 초래 할 수 있으므로 위험한 것으로 나타났으며 500-1000 Rpm 의 속도가 적합한 것으로 시험되었으며 시편을 절삭하는 Spindle의 Rpm은 운전범위는 0-1500Rpm 이나 무리한 운전을 피해 가장 적절한 Speed로 운전해야하며 시험결과 500-800Rpm 이 최적운전범위로 나타났다 또한 시멘트고화체에서의 코아 채취시험에서는 Spindle의 속도는 500 Rpm, Z -AXIS 의 Rpm은 900 Rpm이 가장 적합한 것으로 나타났으며 성능평가시험을 통하여 비트부의 절삭속도와 Z축의 이동속도에 관한 그라프를 획득하였으며 시편의 크기에 따라서 Spindle의 속도를 증감하여야함을 확인할 수 있었다.

• International Journal of Highway Engineering
• /
• v.2 no.1
• /
• pp.135-145
• /
• 2000

A new procedure needs to be developed to predict the dynamic layer properties under moving truck loads. In this study, a computer code to evaluate layer moduli of asphalt concrete pavement from measured interior deflections at various depths were developed and verified from numerical model tests. Interior deflections of the pavement are measured from Multi-Depth Deflectometer(MDD). It was found that errors between the given and backcalculated moduli in numerical analysis were less than 0.32% for several numerical models tested. When impact loads were used, a technique to determine the depth to virtual rigid base was proposed through the analysis of compressive wave velocity and impulse loading durations. It was found that errors between the given and backcalculated moduli in numerical analysis were less than 0.114% when virtual rigid base was considered in numerical analysis. The pavement behavior must be evaluated under various vehicle speeds when determining the dynamic interaction between the loading vehicle and pavement system. To evaluate the dynamic behavior on asphalt concrete pavement under various vehicle speeds, truck moving tests were carried out. From the test results with respect to vehicle speed, it was found that the vehicle speed had significant effect on actual response of the pavement system. The lower vehicle speed generates the higher interior deflections, and the lower dynamic modulus.

• The Korean Journal of Mycology
• /
• v.30 no.1
• /
• pp.23-30
• /
• 2002

The genetic variations and the rate of mycelial growth in the dikaryon and the monokaryon stages of Pleurotus spp. were surveyed during their subcultures. The highest growth rate was observed on both the 3rd and the 4th subcultures. The remarkably rapid growth rate was detected in P. ostreatus dikaryon. Genetic similarities in the dikaryon and the monokaryon of P. ostreatus were more than 57.5% and 85.7%, respectively, and those of P. eryngii were more than 85.2% and 84.8%, respectively. The genetic similarities of monokaryotic P. ostreatus were higher than those of dikaryotic. The topology of phylogenetic trees showed that the divergence and the clustering patterns of branch did not correlated with the number of subcultures. This suggests that genetic variations occur very randomly on mycelial cultures. These results suggest that the monokaryotic mycelia is genetically more stable than the dikaryotic in subcultures, and that it is very useful to stock monokaryotic mycelia for making spawns and breeding of Pleurotus spp.

• Composites Research
• /
• v.27 no.2
• /
• pp.42-46
• /
• 2014

In the present study, impact tests were carried out to investigate the crashworthy behaviour of the expanded polypropylene under the constant incident energy (100 J and 200 J) with five different combinations of striker mass and velocity. Also, preliminary quasi-static test was performed to obtain basic characteristics of the expanded polypropylene. MTS 858 and Instron dynatup 9250 HV were used for the quasi-static test and impact tests, respectively. In consequence, it was found that the impact energy absorption characteristics of the expanded polypropylene was more influenced by the striker mass instead of the velocity of the striker.

• Journal of Korean Society of Transportation
• /
• v.29 no.6
• /
• pp.17-23
• /
• 2011

It has been presumed that the amount of vehicle's $CO_2$ emission would highly related to vehicle's cruising speeds on highways. In this study, it was tested if vehicle's $CO_2$ emissions would relate to the types of highways and the level of congestion. The results showed that the amount of $CO_2$ emission changes depending on (1) the vehicles' cruising speeds (b) congestion levels, and (c) the types of intersections. It was found that the vehicle acceleration and deceleration methods increases the amount of $CO_2$ emission up to 12%. It was also found that it changed up to 30% and 40% depending on the level of congestion and the types of intersections, respectively. The findings imply that the amount of $CO_2$ emission from vehicles should be improved when vehicles' cruising speeds are well managed through congestion management.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.25 no.3
• /
• pp.215-221
• /
• 2007

In Ubiquitous computing, RFID has been become a key technology to provide the real-time location information of users. For this purpose, many recent researches have been conducted regarding RTLS based on the RFID system. In this study, we evaluated the efficiency and feasibility of the velocity gauging system using RTLS based on the RFID system. By using this system, the velocity of mobile units were measured and the accuracy was evaluated with data obtained from DGPS. The results demonstrated that RTLS based on the RFID system would be suitable to measure with relatively low velocity information of mobile units. When RFID infrastructures are being constructed, the developed system will be a better position to increase popularity of velocity information service.

• Journal of the korean Society of Automotive Engineers
• /
• v.5 no.3
• /
• pp.56-63
• /
• 1983

강성체로된 견인물체가 탄성무한경면으로 지지된 점탄성층 위를 미끄러져 갈 때 접촉구간에서의 압력분포와 마찰 특성을 고찰하였다. 즉, 접촉구간에서의 강성체의 모양과 압력분포에 관한 적분 방정식을 구하고, 점탄성층의 두께가 접촉구간에 비하여 충분히 두꺼울 때 압력분포와 마찰계 수의 근사해를 구하였다. 압력분포의 모양은 점탄성층의 물성을 표시하는 지수값, 즉 .alpha.<1/2, .alpha.=1/2, .alpha.>1/2에 따라서 크게 다르다. 한편, 수치해석에 의하면 마찰 계수에 대한 근 사해는 강성체의 미끄럼 속도, 점탄성 층의 두께, 탄성체의 영율 (E$_{o}$ )과 점탄성층의 시효 성탄성계수 (E$_{v}$ )의 차, 즉 E$_{o}$ /E$_{v}$ 에 따라 변화함을 알 수 있다. 즉, 탄성체가 점탄성층에 비하여 딱딱하면 할수록, 또 강성체 속도가 느리면 느릴수록 마찰계수는 작아진다. 그리고 불성의 지수(.alpha.)가 커지면 커질수록 근사해의 수렵 속도는 느려지게 되고 지 수(.alpha.)가 1에 가까워지면 점탄성층의 탄성효과는 점성효과에 비하여 거의 무시할 수 있으며 근사해는 의미가 없어지게 된다.

• Elastomers and Composites
• /
• v.36 no.1
• /
• pp.52-60
• /
• 2001

Physical properties of foams depend on the density of foams, Physical properties of base polymers, open ceil contents, and cell structures including the size, size distribution, shape of ceil and the thickness of membrane and strut. The density of foam is affected by raw materials, concentration oi crosslinking agent and blowing agent and process parameters such as processing technique and condition. Ethylene vinyl acetate copolymer(EVA) foam is a crosslinked cellular material. The foaming characteristics and physical properties of EVA foam are affected by decomposition rate of blowing agent. In this study, the decomposition rate of blowing agent and crosslinking rate, foaming characteristics and physical properties of foams were evaluated. The slow decomposition rate of blowing agent results in low density foam, good shock absorption property and uniform cell size distribution compared to the high decomposition rate of blowing agent.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.8 no.2
• /
• pp.100-107
• /
• 2009

Velocity estimation is one of important issues for efficient system management in mobile cellular systems. In this paper, a modified velocity estimation scheme which works in Adaptive Antenna System (AAS) is proposed. The proposed scheme estimates user velocity based on moving distance information and sojourn time information. From numerical results, it is shown that the proposed scheme can estimate user velocity accurately with low cost.

• 한국방재학회:학술대회논문집
• /
• 2007.02a
• /
• pp.283-286
• /
• 2007

지반을 보강 또는 지하수를 차단하기 위해 실시되는 그라우팅과 같은 공법이 제대로 효과를 발휘하기 위해서는 bulging 또는 sheet 형태의 그라우트체 형상의 조절이 필수적이다. 본 논문에서는 이러한 그라우트체 형상에 영향을 끼치는 인자를 찾기 위해 포화된 사질토지반에서의 그라우트 실험을 다수 실시하였다. 그라우트의 주입속도와 점성의 크기, 사질토의 상대밀도와 입도크기의 인자를 사용하여 실험을 사용한 결과, 비교적 느린 주입속도와 작은 상대밀도, 그라우트의 점성과 입자가 클수록 bulging 형상의 그라우트체가 형성이 되었다. 이와는 반대로 빠른 주입속도와 높은 상대밀도, 그리고 그라우트의 점성과 흙 입자가 작을수록 sheet 형상의 그라우트체가 형성이 됨을 확인하였다.