• Journal of Teachers' Pension
• /
• v.4
• /
• pp.209-256
• /
• 2019

글로벌화 시대의 도래에 따라 국내외에 사학연금 가입자의 국제적 이동이 급증하고 있다. 이에 따라 국내외 사학연금 가입자의 사회보장협정 체결에 관한 필요성이 증가하고 있다. 국민연금은 제도 도입 초기부터 해외 국가와 사회보장협정을 통하여 보험료 이중적용의 면제와 가입기간 합산을 통해 각국 연금제도에 기여한 기간에 따라 양국에서 각각 연금을 수령하고 있다. 그러나 사학연금은 국민연금에 비하여 해외 사학연금 가입자에 대한 정책적인 고려가 되고 있지 아니하다. 본 연구에서는 이와 같은 상황을 감안하여 해외 사학연금의 사회보장협정 체결의 필요성과 타당성 및 체결효과에 대하여 분석하고자 하였다. 본 연구는 사학연금이 독자적으로 사회보장협정을 체결하는 방안보다는 국민연금에서 체결한 사회보장협정을 준용하여 사학연금의 사회보장협정 방안을 제시하였다. 본 연구의 주장은 다음과 같다. 첫째, 국민연금이 체결한 사회보장협정의 내용을 토대로 사학연금이 사회보장협정 체결을 시도할 필요가 있다. 둘째, 사회보장협정 체결을 위한 제반 규정 및 시스템을 마련할 필요가 있다. 본 연구는 사학연금의 사회보장협정 체결의 필요성 및 근거 자료를 제공함으로써 사학연금의 사회보장협정 체계를 추진하는 방안을 제시하였다는데 의의가 있다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.9
• /
• pp.841-850
• /
• 2008

Strength and failure of composite-to-aluminum rivetted, bonded, and rivet/bonding hybrid single-lap joints were investigated by experiment. A total of 82 joint specimens were tested with 3 different overlap lengths and 2 types of stacking sequence. FM73m adhesive film and NAS9308-4-03 rivet were used for hybrid joints. While failure loads of the bonded and hybrid joints increased as the overlap length increased, failure loads of the rivetted joints were not affected by the overlap length. Effect of the stacking sequence was not remarkable in the simple bonded or rivetted joints. Failure loads of the hybrid joints, however, showed the maximum of 30% difference depending on the stacking sequence. Major failure mode of the bonded and hybrid joints was the delamination of the composite adherend and failure mode of riveted joints was the rivet failure with local bearing.

• Journal of the Korean Geotechnical Society
• /
• v.29 no.6
• /
• pp.33-51
• /
• 2013

This paper introduces the improvement of connection method for segment in tunnel lining system using prestressed steel cable and presents the results of real-scale tests. It conducted a study about the applicability and mechanical behaviour analysis of the new method that connects segment tunnel lining using prestressed steel cable by real-scale test. Through the research, it was found that the new method has stronger connection than conventional assembling methods. Also, the new method can be expected to have integrated behavior and stability increase of shield tunnel lining. It is considered that the new method is much more effective than conventional assembling methods.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.3
• /
• pp.1243-1251
• /
• 2013

The purpose of this study is to investigate the influence of initial clamping force of tension clamp on the performance of an elastic rail fastening system used in sharp curve track. In this study, the initial clamping force and the increasing lateral wheel loads were conducted in the analytical and experimental study, i.e., finite element analysis, laboratory and field test. Using the analytical and experimental results, the performance of the tension clamp was investigated. It was found that the stress of tension clamp depends on the initial clamping force. Therefore the initial clamping force appeared to directly affect the compression stress of the tension clamp. It was found that the compression stress of tension clamp was transferred to the tensile stress by applied the lateral wheel load in service sharp curve track. Further, it was concluded that the initial clamping force was applied on the strengthening force for the tension clamp and then the appropriate initial clamping force was important to ensure a stable performance and long term endurance of tension clamp.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.32 no.9
• /
• pp.49-56
• /
• 2004

With the wide application of fiber-reinforced composite material in aero-structures and mechanical parts, the design of composite joint have become a very important research area because they are often the weakest areas in composite structures. In this paper, the linear finite element analyses in which the pin of the composite joint was assumed to be the frictionless rigid body were performed and predict the strength of the mechanically fastened composite joint using the failure area index method. By the failure area index method, the strength of the mechanically fastened composite joint which has the specimen of different shape, hole size and stacking sequence could be predicted within 12.2%.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1997.11a
• /
• pp.29-29
• /
• 1997

각광 받는 구조재료인 섬유강화 복합적층재에 대한 기계적 체결 거동은 본질적인 재료의 이방성에 의해서 파단강도가 파단 모우드와 매우 밀접한 관련을 갖는 것으로 알려져 있다. 따라서, 복합적층판 체결부의 정밀 구조 설계에서는 단순화에 따른 오차를 줄이고 정밀해에 의한 설계 및 해석이 요청된다. 특히, 층간응력 성분을 무시할 수 없는 두께를 갖는 복합적층 판의 기계적 체결부 해석이나 실제 구조물의 체결부에서 발생하는 굽힘이나 비틀림과 같은 하중 상태를 묘사하기 위해서도 정밀한 3차원 응력 해석은 필요하다. 하지만, 지금까지 기계적 체결부의 거동에 관한 연구는 층간응력 성분들을 어느정도 무시할 수 있는 얇은 평판에 대한 2차원 응력해석에 주로 국한되어 왔으며, 일부 수행된 체결부에 대한 3차원 응력 해석의 경우 여러 단점을 갖는 3차원 연속체 요소에 의한 유한요소 해석이 수행되었을 뿐이다.본 연구는 층간응력 성분들을 무시할 수 없는 두께를 갖는 복합적층판의 기계적 체결부 해석에 지금까지 사용되어온 3차원 연속체 요소에 의한 유한요소 방법이 갖는 단점들을 개선한 Layerwise 유한요소법을 이용하여 3차원 응력해석을 수행하였다. 특히, 선형상보성원리에 근거한 최적설계 기법을 응용하여, 기계적 체결시 핀과 적층판의 홀 사이에 발생하는 하중 전달 과정을 모사하고, 접촉력에 의한 홀 주위의 복잡하고 국부적인 응력 집중현상을 규명하여본다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.8
• /
• pp.378-385
• /
• 2017

This study investigated the design of a snap fit, which is widely used for fastening plastic parts. We analyzed the assembly mechanism of a lock snapfit, measured the assembly force and separation force based on the design of experiments, and derived a regression equation through an analysis of variance. The response surface methodology was also used. Polybutylene terephthalate was used to fabricate specimens, and the assembly force and separation force were measured using a micro-tensile tester. The length, width, thickness, and interference were considered as factors. A second-order regression model was used to derive the regression equation. The assembly force decreased with increasing length and width, but it increased with increasing thickness and interference. The finite element method was used to analyze the assembly mechanics. The width decreased the assembly force by increasing the ductility. The influences of the factors for low assembly force and high release force were shown to be opposite to each other. It was necessary to design a structure that minimized the assembly force while maintaining an appropriate level of separation force.

• Composites Research
• /
• v.15 no.4
• /
• pp.9-16
• /
• 2002

With the wide application of fiber-reinforced composite material in aero-structures and mechanical parts, the design of composite joint have become a very important research area because they are often the weakest areas in composite structures. In this paper, the failure area index method to predict the strength of the mechanically fastened composite joint which has the same stacking sequence was suggested and evaluated. By the suggested failure area index method, the strength of the mechanically fastened composite joint could be predicted within 6.03％.

• Proceedings of the KSR Conference
• /
• 2000.11a
• /
• pp.319-327
• /
• 2000

본 연구는 국내 독자기술의 절대적 빈곤속에서 외국기술에만 의지하는 레일체결장치의 국내 현실을 탈피하기 위하여 독자적인 한국형 레일체결장치 개발을 시도하는 것이다. 본 연구에서는 판 스프링은 제외하고 봉 스프링(coil spring)에 대해서만 우선적으로 시제품을 개발하였다. 세계적으로 유명한 체결장치의 장ㆍ단점을 분석하여 장점만을 취하고자 하는 설계 목적을 가지고 새로운 레일체결장치의 개발에 착수하였다. 본 장치의 개념설계를 통하여 유지보수성과 안전성을 동시에 확보할 수 있도록 하였다. 현재 장치의 모형제작을 통하여 조립성 및 가능성을 타진하였으며 전산응력해석을 통하여 체결 스프링 및 숄더의 적정치수를 산정 하였다. 본 연구는 국내에서 본격적인 체결장치개발의 시초가 되기를 희망한다.

• Journal of the Korean Society for Railway
• /
• v.20 no.4
• /
• pp.521-528
• /
• 2017

In this study, vertical loading tests were conducted to investigate the nonlinear behaviors of the fastening systems that have generally been used in the concrete track of domestic railway lines. Nonlinear load-displacement curve models were derived based on the test results. The uplift forces generated in the fastening systems were evaluated by applying the derived nonlinear models as well as the existing linear models. The influence of the factors on the maximum uplift force of the fastening system was analyzed through a parameter study on the distance between neighboring sleepers, the horizontal distance between the center of the bearing and the nearest fastening system from the deck end, and the height of the bridge girder. From the evaluation results it is known that, for economical track and bridge design, due to deck end deformation, it is necessary to consider the nonlinear behavior of the fastening system in the calculation of the uplift force of the fastening systems.