• 한국수산과학회지
• /
• 제9권1호
• /
• pp.1-7
• /
• 1976

그물실의 강도가 매듭에서 감소하는 기구를 명백히 하기위해, 매듭에서의 그물실의 파단현상울 관찰하고 강도 감소에 영향을 끼치는 요소들을 조사하여 매듭의 강도를 나타내는 식을 유도하고, mono-filament, multi-filament, 및 spun 그물실로 구분된 11종류의 그물실에 대해 매듭의 강도를 측정하여 상기 식에 의한 계산치와 비교했다. 실험의 결과, 매듭이 파만을 일으키는 부분은 매듭의 첨단, 즉 매듭과 다리와의 경계이었으며, 강도감소의 원인은 이 첨단에 마찰력이 작용함으로 인해, 첨단에 위치한 섬유들이 자신에 걸리는 장력에 의해서 재분포하는데 마찰력만큼 저항을 받게 되기 때문이라고 간주되었다. 매듭의 강도 T는 $$T=\frac{T_0}{1+{\mu}\frac{s}{\rho}\varrho^{\mu\theta}$$ 로 표시되었고, 이 식에 의한 계산치는 실험치와 거의 일치했다. 단, $T_0$는 그물실의 항장력, $\mu$는 그물실간의 마찰계수, S는 매듭의 첨단과 그 첨단을 압축하는 그물실과의 접촉길이, $\rho$는 그 첨단을 압축하는 그물실의 곡률반경, $\theta$는 그 첨단을 압축하는 그물실이 반대편 첨단에서 다른 그물실과 마찰되는 각도이다.

• 방사선산업학회지
• /
• 제6권2호
• /
• pp.111-117
• /
• 2012

This study was conducted to improve organoleptic quality of gamma-irradiated Tarakjuk at 10 kGy with cheeses (Camembert, Cheddar, Gouda, and Edam) and flavors (Nurungji, cream, and vanilla-cream). Overall acceptability of gamma-irradiated Tarakjuk added each camembert cheese and vanilla-cream flavor was the highest among the all samples. In the effect of sterilization method on the quality of Tarakjuk, the autoclaved samples added with Edam cheese, Gouda cheese, and vanilla-cream flavor, respectively, were showed higher score on the overall acceptability than the irradiated samples, meanwhile the irradiated samples were superior in the other samples. In case of added mixture of Edam cheese and vanilla-cream flavor, irradiated Tarakjuk with mixture was showed the most of high score on overall acceptability. In conclusion, addition of mixture of cheese and flavor to Tarakjuk may help to improve organoleptic quality of sterilized Tarakjuk by gammairradiation.

• 방사선산업학회지
• /
• 제6권2호
• /
• pp.177-180
• /
• 2012

The acid and bile tolerance changes of 5 different lactic acid bacteria (LAB; Lactobacillus paracasei, Lactobacillus casei, Lactobacillus acidophilus, Lactobacillus plantarum, and Lactobacillus debruekii) with gamma irradiation were evaluated. The abilities of LAB to survive in the acidic conditions at the stomach and the bile acidic conditions at the beginning of the small intestine are the key functions for applying LAB to probiotics. In the results, all of LAB survived more than 50% after incubation in PBS (pH 2.5) for 2 hr, which indicated more than half of LAB are possible to pass through the stomach. However, gamma irradiation decreased the acid tolerances of LAB. The bile tolerances of all bacteria except Lactobacillus acidophilus were observed to survive at a 3% oxgall concentration in MRS, and 1 kGy of gamma irradiation to LAB did not affect any bile tolerances changes. But gamma irradiated Lactobacillus casei and Lactobacillus casei (3 kGy) showed decreasing survival rate with oxgall added MAS agar. In conclusion, gamma irradiation should be applied to yogurt or fermented foods with care because LAB could be changes their properties on acid and bile tolerances.

• 방사선산업학회지
• /
• 제6권1호
• /
• pp.23-29
• /
• 2012

In this study, we investigated the genetic variation in the general of monocot model plant (rice) in response to various ionizing irradiations including gamma-ray, ion beam and cosmic-ray. The non-irradiated and three irradiated (200 Gy of gamma-ray and 40 Gy of ion beam and cosmic-ray) plants were analyzed by AFLP technique using capillary electrophoresis with ABI3130xl genetic analyzer. The 29 primer combinations tested produced polymorphism results showing a total of 2,238 bands with fragments sizes ranged from 30 bp to 600 bp. The number of polymorphism generated by each primer combinations was varied significantly, ranging from 2 (M-CAC/E-ACG) to 158 (M-CAT/E-AGG) with an average of 77 bands. Polymorphic peaks were detected as 1,269 with an average of 44 per primer combinations. By UPGMA (Unweighted Pair Group Method using Arithmetic clustering) analysis method, the clusters were divided into non-irradiated sample and three irradiated samples at a similarity coefficient of 0.41 and three irradiation samples was subdivided into cosmic-ray and two irradiation samples (200 Gy of gamma-ray and 40 Gy of ion beam) at similarity coefficient of 0.48. Similarity coefficient values ranged from 0.41 to 0.55.

• 방사선산업학회지
• /
• 제7권1호
• /
• pp.45-49
• /
• 2013

In tissue engineering application, a fibrous structure of scaffolds has been issued as an alternative system to regulate cell survival and tissue regeneration, and electrospinning technique has been popularly used to generate fibrous meshes or sheets mimicking the structure of native extracellular matrix (ECM). However, recent strategy in the scaffold development is expanded to provide the structural property as well as a biological property of native ECM, a variety of surface modification techniques have been used to introduce biological property. In this study, we developed biomimetic poly(L-lactide-co-${\varepsilon}$-caprolactone) (PLCL) nano- and micro-fibrous scaffolds as a unique platform with structural and biological properties with native ECM using electrospinning method and gamma-ray irradiation. Surface morphology of the scaffolds was observed by scanning electron microscopy, and alteration of surface property was evaluated with toluidine blue O staining, water contact angle measurement and ATR-FTIR analysis.

• 방사선산업학회지
• /
• 제7권2_3호
• /
• pp.161-166
• /
• 2013

The purpose of this study was to investigate the cell proliferating and interleukin-2 producing activity of staphylococcal enterotoxin B by gamma-irradiation. Staphylococcal enterotoxin B was gamma-irradiated with the various doses of 0, 2, 20 and 50 kGy. SDS-PAGE analysis showed that gamma-irradiation caused the sharp decrease of the content of staphylococcal enterotoxin B and the effect was irradiating dose-dependent. Non-irradiated staphylococcal enterotoxin B increased the cell proliferation of splenocytes isolated from female Balb/c mouse, whereas 2 kGy-irradiated toxin significantly decreased the activity. 20 and 50 kGy-irradiated staphylococcal enterotoxin B was no effect. A similar effect on the interleukin-2 production of mouse splenocytes was observed with non-irradiated and irradiated staphylococcal enterotoxin B. It was considered to be due to the decrease of the antigenicity of staphylococcal enterotoxin B by gamma-irradiation. Therefore, these results suggest that gamma-irradiation can be effective for the decrease of the antigenicity of staphylococcal enterotoxin B as superantigen.

• 방사선산업학회지
• /
• 제7권1호
• /
• pp.87-91
• /
• 2013

Taraxacum platycarpum (TP) has been used for years without restriction on usual dose for its non-toxic nature and nonexistence of the side effects. To develop antimicrobial hydrogel, poly (vinylalcohol) (PVA) hydrogels containing the aqueous extracted TP as an antimicrobial agent were prepared by using gamma-rays irradiation. The antimicrobial activities of the TP hydrogels were tested against Staphylococcus aureus and Staphylococcus epidermidis by disc diffusion method. The inhibition zones (IZ) of the TP extracts and TP hydrogels against S. aureus were 16 mm and 20 mm and against S. epidermidis was 10 mm and 13 mm, respectively. In conclusion, the TP hydrogel that has an excellent antimicrobial activity was proved to be a valuable material for functional skin care.

• 한국표면공학회지
• /
• 제54권6호
• /
• pp.302-306
• /
• 2021

SnO₂ 30/Ag 15/SnO₂ 30 nm(SAS) tri-layer films were deposited on the glass substrates with RF and DC magnetron sputtering and then electron beam is irradiated on the surface to investigate the effect of electron bombardment on the opto-electrical performance of the films. electron beam irradiated tri-layer films at 1000 eV show a higher figure of merit of 2.72×10^-3 Ω^-1 than the as deposited films due to a high visible light transmittance of 72.1% and a low sheet resistance of 14.0 Ω/☐, respectively. From the observed results, it is concluded that the post-deposition electron irradiated SnO₂ 30/Ag 15/SnO₂ 30 nm tri-layer films can be used as a substitute for conventional transparent conducting oxide films in various opto-electrical applications.

• 한국표면공학회지
• /
• 제52권3호
• /
• pp.163-170
• /
• 2019

Durability of instrument is one of the most important factor to ensure accurate treatment and decrease failure for the orthopedic surgical operation. Normally, a set-screw driver tip has been processed with hard coating for their higher durability and wear resistance. And several surface modification methods were obtained such as titanium nitride (TiN) coating, diamond like carbon coating, other nitriding, and etc. In this study, we have surface modified on set-screw driver tip with TiN and DLC, investigated whether the TiN and DLC coatings affect the mechanical properties and durability of the set-screw driver tip in the pedicle screw system. The surface morphologies were observed with scanning-electron microscopy (SEM), and the static/dynamic torsional properties were investigated with universal testing machine based on ASTM F543. Coating thickness of each coatings were commonly around $1^{\circ}C$. Static torsional stiffness, and ultimate torque values for DLC and TiN coated samples were significantly higher than those of non-coated sample by the pared T-test. Surface morphology of after the dynamic torsional test was more clean with less scratch or friction traces from DLC coating than that of TiN coating and non-coated sample.

• 대한의용생체공학회:의공학회지
• /
• 제42권3호
• /
• pp.125-142
• /
• 2021

The POCT (point-of-care test) sensing that has been a fast-developing field is expected to be a next generation technology in health care. The POCT sensors for the detection of proteins, small molecules and especially nucleic acids have lately attracted considerable attention. According to the World Health Organization (WHO), the POCT methods are required to follow the ASSURED guidelines (Affordable, Sensitive, Specific, User- friendly, Robust and rapid, Equipment-free, Deliverable to all people who need the test). Recently, several CRISPR (Clustered Regularly Interspaced Short Palindromic Repeats) based diagnostic techniques using the sensitive gene recognition function of CRISPR have been reported. CRISPR/Cas (Cas, CRISPR associated protein) systems based detection technology is the most innovative gene analysis technology that is following the ASSURED guidelines. It is being re-emerged as a powerful diagnostic tool that can detect nucleic acids due to its characteristics that enable rapid, sensitive and specific analyses of nucleic acid. The first CRISPR-based diagnosis begins with the discovery of the additional function of Cas13a. The enzymatic cleavage occurs when the conjugate of Cas protein and CRISPR RNA (crRNA) detect a specific complementary sequence of the target sequence. Enzymatic cleavage occurs on not only the target sequence, but also all surrounding non-target single-stranded RNAs. This discovery was immediately utilized as a biosensor, and numerous sensor studies using CRISPR have been reported since then. In this review, the concept of CRISPR, the characteristics of the Cas protein required for CRISPR diagnosis, the current research trends of CRISPR diagnostic technology, and some aspects to be improved in the future are covered.