• Journal of the Korean Society of Propulsion Engineers
• /
• v.3 no.1
• /
• pp.104-117
• /
• 1999

The Composite materials has been used in the field of high technology industry because of high specific stiffness and high specific strength. Specially, the composite materials has been widely applied to the field of the aircraft and the transportation by the effectiveness of light weight due to low specific weight and reduction of the parts due to bonding, molding and so on. These advantages about the composite have led to study and apply in the transmission shaft for the aircraft and the drive shaft for the automobile. The composite material propeller shaft with the high vibrational stability was designed and analyzed. In order to verify the analysis, two types of experimental test which are the FFT analyzer with impact hammer and the rotational equipment were applied.

• Journal of Science Education
• /
• v.34 no.2
• /
• pp.421-431
• /
• 2010

The purpose of this study was to identify instructional components supporting students' interest and creativity in American middle school science classrooms. Two 7th grade classrooms were selected, and observed for 11 class periods each. Results showed that hands-on and small group activities were the most effective ways to increase students' interest. The teachers' instructional approaches, such as individualized paced teaching, sufficient peer teaching, permissive atmosphere, various media, and purpose-focused summary game were found to influence students' interest. To enhance students' creativity, increasing interest, making hypothesis, and trying to various experimental method with sufficient time were identified as effective components.

• Information and Communications Magazine
• /
• v.25 no.6
• /
• pp.18-24
• /
• 2008

항공분야 산업은 기계/전자/소재/정보통신 등 첨단과학기술이 유기적으로 융합되어 운영되는 대표적인 IT융합산업이다. 특히, 항공기에서 IT기반 기술이 융합되어 적용되는 곳은 조종사의 성공적인 임무수행을 위한 항공기에 탑재된 응용 소프트웨어와 항공전자장비들로 구성된 항공 임베디드 시스템이다. 항공 임베디드 시스템은 항공기의 성능과 직결되고 신규 개발 및 성능 개량 시 필수적으로 개발해야하는 시스템 종속적인 1차 시스템과 시스템 독립적이며 국내외 부품시장에서 구매 가능한 서브시스템인 2차 시스템으로 나눌 수 있다. 최근 기간산업에 IT 활용 비중이 점차 높아짐에 따라 IT가 기간산업의 경쟁력을 좌우하는 핵심 요소로 부상하고 있으나, IT산업은 성장이 점차 둔화되고 있는 실정이다. 지식경제부는 이에 따라 기간산업의 경쟁력을 높이고 IT기반 융합신산업을 창출하기 위해 5대 IT융합 신 산업 창출과제를 발표했다. 5대 과제중의 하나인 국방전력 극대화 사업으로 우리 기술로 개발한 초음속 고등훈련기인 T-50에 탑재되는 임베디드 소프트웨어 및 컴퓨터를 국산화하고 있다. 본 사업으로 비행운용프로그램, 실시간 운영체제, 미들웨어, 임무컴퓨터 및 무장관리컴퓨터 등이 순조롭게 개발될 경우 전량수입에 의존하고 있는 T-50의 1차 시스템을 100% 국산화할 수 있을 것으로 기대되며 수입대체 효과와 유지보수비용 절감으로 약 2조원의 부가가치 창출이 예상된다. 본 논문에서는 현재 개발을 진행하고 있는 항공 임베디드 시스템에 대하여 알아본다.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2008.11a
• /
• pp.163-169
• /
• 2008

The application of robot technology on construction sites is recognized an effective solution to the problems caused by labor shortage on the construction industry, and relevant studies are being carried out increasingly. Automatic construction system for frames of high-rise building was developed in Japan in 1990's. Practical use o F the system, however, was failed due to inefficiency Now, we are developing economic and practical automatic construction system that is lighter and suitable for building construction In Korea. This study has discussed developing the system of construction factory and climbing control system, which is the core technology of the automatic construction system in Korea.

• The Bulletin of The Korean Astronomical Society
• /
• v.38 no.1
• /
• pp.73.1-73.1
• /
• 2013

전파자료처리를 위한 전파분광기는 전파망원경으로 얻어진 우주전파자료를 최종 처리하는 장비이다. 현재, 전파관측에서는 우주의 미세구조를 밝혀내기 위해 관측자료의 대량화와 고속화가 진행되고 있는데, 이러한 초고속 대용량 자료를 처리하기 위해서 FPGA나 ASIC 등으로 구성된 하드웨어 기반의 전파분광기를 주로 사용하고 있다. 그러나, 하드웨어 기반의 전파분광기는 개발에 시일이 많이 소요되고 고가이며 수정 변경이 쉽지 않다. 한편, 관측자료는 더 대량화되고 고속처리가 필요한 추세로 가고 있다. 이러한 한계를 극복할 수 있는 방법 중 하나가 고속 계산 플랫폼을 기반으로 구현되는 소프트웨어 전파분광기이다. 미국, EU, 일본 등은 이러한 전파분광기 개발을 이미 진행하고 있다. 특히, THz 대역에서 관측시스템 개발을 이제 막 시작하는 우리나라로서는 경쟁력을 갖추려면 외국의 기술의존성을 탈피하고 첨단의 초고속 관측자료처리 기술을 확보해야 한다. 이를 위해 국내의 우수한 IT기술을 전파관측기술에 활용하여 단계적으로 기술을 발전시킬 필요가 있다. 본 연구는 고속 계산 플랫폼을 기반으로 구현되는 소프트웨어 광대역 전파분광기의 기술개발에 관한 것으로 전파관측에 적용할 수 있는 x-엔진 개발과 기술 결합에 중점을 두고자 한다. 이에 소프트웨어 광대역 전파분광기의 기본 설계 및 향후 계획을 소개한다.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.9 no.5
• /
• pp.25-37
• /
• 2010

This study is aimed at enhancing mobility rights for the transportation underprivileged that has been made light of relatively compared to normal people. In order to do this, we've suggested having ITS (Intelligent Traffic System) built and improving satisfaction through the test operation of its main system. The existing sound signal device for the visually handicapped has one problem with managing it. Because, the people in charge of it had to visit each problematic site directly to maintain and fix some problems every time it was out of order. Moreover, it couldn't provide sustainable services about voice guidance and the visually handicapped had to control it by either confirming the location of buttons that were installed on the pillar of traffic light and then pressing one of them or using a remote controller on their own. In order to improve such inconveniences, we have created a new typed sound signal device for the visually handicapped by applying the cutting-edge wireless technology based on ergonomics considering actual road situations. Such technology enables it report the status of signal device and light to them by using its voice guidance system automatically every time they have access to it. Additionally, we've already introduced it to a couple of test areas and then known the fact that they recognized traffic situation more conveniently and safely compared to the existing sound signal device. That is above average in terms of satisfaction. In addition to that, we've provided LTS (Location Tracking System - Location-based service intended for elementary students) by utilizing the existing wireless infrastructure and founded the fact that about 87% of their parents were satisfied with the service based on LTS.

• Journal of the Society of Disaster Information
• /
• v.18 no.1
• /
• pp.104-115
• /
• 2022

Purpose: Infrastructure inspection and its diagnostics technique have been rapidly developing recently. Therefore, it is important to secure the reliability of diagnostic equipment, and this paper deals with inspection of diagnostic equipment, introduction to a certification system and development plans for infrastructure. Method: Several certification systems are established and introduction plans are reviewed through experts by synthesizing the contents of certification research for existing infrastructure diagnosis equipment. In addition, the revision of the law for introduction of the system is reviewed, detailed operation regulations are prepared and phased development plans are reviewed, which are based on the operation scenario. Result: Inspection and certification plans were constructed through four routes in order to consider infrastructure inspection and diagnostic equipment in use, and new diagnostic equipment using state-of-the-art technology. Furthermore, market confusion depending on the introduction of a new certification system is minimized and reliability is secured by transforming a simple inspection system in the short term into a formal certification system in the long term. The law amendments according to the introduction of the system were reviewed and detailed operation regulations were developed. Also, phased development plans, which are based on the long-term development scenario including manpower, infrastructure and specifications, were presented. Conclusion: It is important to secure reliability through the distribution and certification of diagnostic equipment using 4th industrial technology to strengthen the safety management of infrastructure at the national level since the infrastructure is various in type and increasingly large in size. It is also essential to train human resources who can use new technology with inspection and diagnosis system in order to enhance the safety management of all infrastructures. Moreover, it is necessary to introduce a regular inspection system for infrastructure that combines loT technology in the long-term point of view and to promote the introduction by giving active incentives to institutions that actively accept it.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.9
• /
• pp.208-214
• /
• 2014

Vehicle dynamic states used in various advanced driving safety systems are influenced by road geometry. Among the road geometry information, the vehicle pitch angle influenced by road slope and acceleration-deceleration is essential parameter used in pose estimation including the navigation system, advanced adaptive cruise control and others on sag road. Although the road slope data is essential parameter, the method measuring the parameter is not commercialized. The digital map including the road geometry data and high-precision DGPS system such as DGPS(Differential Global Positioning System) based RTK(Real-Time Kinematics) are used unusually. In this paper, low-cost cascade extended Kalman filter(CEKF) based road slope estimation method is proposed. It use cascade two EKFs. The EKFs use several measured vehicle states such as yaw rate, longitudinal acceleration, lateral acceleration and wheel speed of the rear tires and 3 D.O.F(Degree Of Freedom) vehicle dynamics model. The performance of proposed estimation algorithm is evaluated by simulation based on Carsim dynamics tool and T-car based experiment.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.6
• /
• pp.874-880
• /
• 2018

3D modeling is extensively used in the field of architecture, machinery and contents production such as movies. Modeling is a time-consuming task. In order to compensate for these drawbacks, attempts have recently been made to reduce the production period by applying 3D scanning technology. 3D scanning for small objects can be done directly with laser or optics, but large buildings and sculptures require expensive equipment, which makes it difficult to acquire data directly. In this study, 3D modeling data for a large object is acquired using photometry with using drones to acquire the image data. The maintenance method for uniform spacing between the sculpture and the drone, the measurement method for the flight line were presented. In addition, we presented a production environment that can utilize the obtained 3D point cloud data for animation and a rendered animation result to find ways to make it in various environments.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.408-408
• /
• 2023

하천공간은 하도, 사주, 식생, 하천구조물 등에 대한 특성을 지니고 있으며, 현장조사를 통해 하천공간에 대한 자료를 분석하여 기초자료를 생산한다. 기존에는 현장에서 육안조사나 지상에서 사진촬영, 스케치방법으로 하천공간특성에 대한 조사를 수행하였으나, 지상에서 조사한 자료은 하천특성에 대한 물리적·공간적 특성을 파악하기 어렵고 자료의 활용성이 낮은 한계점이 존재한다. 이와 같은 한계를 극복하기 위해 GIS 및 RS 기술을 활용한 고도화된 첨단조사 기술 및 장비가 도입되어 활용되고 있다. 본 연구에서는 하천공간특성을 GIS 기반으로 객체지향 분류 적용 연구와 분류 항목에 따른 공간분석 연구를 수행하였다. 연구를 위한 대상지역은 섬진강권역의 지석천 유역 하류부에 위치하고 있는 지석천 친수공원을 대상으로 선정하였다. 대상지역의 고해상도 항공영상을 수집 및 정합한 후 QGIS에서 제공하는 Orfeo ToolBox(OTB)의 LSMS(Large Scale Mean-Shift) 기법으로 정합한 항공영상의 객체지향 영상분할을 실시하여 벡터 레이어를 생성하였고, 하천공간특성에 따른 항목을 선정하여 각 항목의 영역에 대한 선별을 통해 훈련데이터를 생성하였다. 훈련데이터는 랜덤 포레스트를 이용하여 각 항목에 대한 자동 분류를 확인하였으며, 하천공간특성의 정량적 평가를 위해 분류된 각 항목별 공간분석을 통해 면적, 위치정보(위도, 경도, 표고)를 산정하였다. 분석 결과, 하천공간특성을 GIS 기반의 벡터 레이어와 각 항목에 대한 정량적 분석을 통해 하천공간의 DB를 구축하였다. 이와 같이 하천공간 DB 구축을 통해 전국 하천관리체계를 위한 기초자료를 구축하고자 하였다.