• Journal of Auto-vehicle Safety Association
• /
• v.13 no.2
• /
• pp.42-49
• /
• 2021

In this paper, we proposes a study on the derivation of inspection factors for the periodic inspection of large buses equipped with AEBS and LDWS. we investigate the safety evaluation (NCAP) of domestic and foreign vehicles and safety standards for the two functions currently in operation and analyze the evaluation factors, measurement methods and evaluation scenarios and so on. In addition, the test scenario was derived by analyzing the vehicle safety evaluation data already held, Therefore, we use an real large bus and the inspection elements for the periodic inspection were derived.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.18 no.1
• /
• pp.14-26
• /
• 2019

For bus drivers' safe driving, a policy that analyzes the causes of the drivers' traffic accidents and then assists their safe driving is required. Therefore, the Ministry of Land, Infrastructure and Transport set up its plan to gradually expand the equipping of commercial vehicles with FCWS (Forward Collision Warning System) and LDWS(Lane Departure Warning System), from the driver-supporting ADAS(Advanced Driver Assistance Systems). However, there is not much basic research on the analysis of bus drivers' traffic accidents in Korea. As such, the time is appropriate to research what is the most necessary ADAS for bus drivers going forward to prevent bus accidents. The purpose of this research is to analyze how serious the accidents were in the different bus routes and whether the accidents were repetitive, and to give recommendations on how to support ADAS for buses, as an improvement. A model of ordered logit was used to analyze how serious the accidents were and as a result, vehicle to pedestrian accidents which directly affected individuals were statistically significant in all of the models, and violations of regulations, such as speeding, traffic signal violation and violation of safeguards for passengers, were indicated in common in several models. Therefore, the pedestrian-sensor system and automatic emergency control device for pedestrian should be installed to reduce bus accidents directly affecting persons in the future, and education for drivers and ADAS are to be offered to reduce the violations of regulations.

• Journal of the Korea Convergence Society
• /
• v.12 no.10
• /
• pp.211-218
• /
• 2021

A recent spread of personal mobility devices such as electric kickboards has brought about a rapid increase in accident cases. Such vehicles are susceptible to falling accidents due to their low dynamic stability and lack of outer protection chassis. This paper presents the development of an automatic emergency braking system and a safe starting system as driving assistance devices for electric kickboards. The braking system employed artificial intelligence to detect nearby threaening objects. The starting system was developed to disable powder to the motor until when the driver's boarding is confirmed. This study is meaningful in that it proposes the convergence technology of advanced driver assistance systems specialized for personal mobility devices.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.11
• /
• pp.550-560
• /
• 2018

Many countries have provided support for research and development and implemented policies for Advanced Driver Assistance Systems (ADAS) for enhancing the safety of vehicles. With such efforts, the toll of casualties due to traffic accidents has decreased gradually. Korea has exhibited the lowest toll of casualties due to traffic accidents and is ranked 32nd in mortality among the 35 OECD members. Traffic accidents typically fall into three categories depending on the cause of the accident: vehicle to vehicle (V2V), vehicle to pedestrian (V2P), and vehicle independent. Most accidents are caused by drivers' mistakes in recognition, judgment, or operation. ADAS has been proposed to prevent and reduce accidents from such human errors. Moreover, the global automobile industry has recently been developing various safety measures, but on-road tests are still limited and contain various risks. Therefore, this study investigated the international standards for evaluation tests with regard to the assessment techniques in braking capability to cope with the limitations of on-road tests. A theoretical formula for braking force and a control algorithm are proposed, which were validated by comparing the results with those from an on-road test. These results verified the braking force depending on the functions of ADAS. The risks of on-road tests can be reduced because the proposed theoretical formula allows a prediction of the tendencies.

• Journal of the Korean Society for Precision Engineering
• /
• v.26 no.12
• /
• pp.131-137
• /
• 2009

Recent technological advances made a vehicle more intelligent to increase safety and comfort. An intelligent vehicle provides drivers with safety warning information through audible sounds, visual displays, and tactile devices. However, elderly drivers have been known to decrease the physical and cognitive abilities such as muscular strength, hearing, eyesight, short term memory, and spatial perception. Therefore, possible age-related deficits should be considered to design an effective warning system. This paper aims to evaluate the impact of advancing age on response performance on audible safety warnings which are widely used for alerting driving hazards. In order to understand the effect of age-related hearing loss and movement slowing, three sound characteristics (frequency, intensity, and period) and three age groups (younger, middle, and older) are considered. Data was drawn from 38 drivers who drove a simulated rural road in a driving simulator. Experimental results show that age influences driver's response performance. In conclusion, the appropriate range of a warning sound is suggested.

• Journal of Auto-vehicle Safety Association
• /
• v.13 no.4
• /
• pp.60-65
• /
• 2021

The event data recorders (EDR) have been used as a device to help understand traffic accidents. With the recent development of autonomous vehicle (AV), it has become important to prepare the new EDR for AV. Therefore, the purpose of this study is to propose the direction of EDR-AV recording. First of all, the recent EDR data elements and the data elements of AV under discussion at UNECE WP29 EDR/DSSAD (Data Storage System for Automated Driving) were analyzed. The consumer complaint database in Motor Vehicle Recall Center in Korea was analyzed in order to utilize cases of domestic traffic accidents related to advanced driver assistance systems (ADAS). Consequently, problems with existing EDR were identified through unclear accident cases related to ADAS. In the future, it was proposed to record images in which the ADAS perception systems recognize the surroundings of the accident site as an EDR-AV recording item.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.3
• /
• pp.57-64
• /
• 2020

The leading technologies of the ADAS (Advanced Driver Assist System) are ACC (Advanced Cruise Control), LKAS (Lane Keeping Assist System), and AEB (Autonomous Emergency Braking). LKAS is a system that uses cameras and infrared sensors to control steering and return to its running lane in the event of unintentional deviations. The actual test is performed for a safety evaluation and verification of the system. On the other hand, research on the system evaluation method is insufficient when an additional steering angle is applied. In this study, a model using Prescan was developed and simulated for the scenarios proposed in the preceding study. Comparative analyses of the simulation and the actual test were performed. As a result, the modeling validity was verified. A difference between the front wheels and the lane occurred due to the return velocity. The results revealed a maximum error of 0.56 m. The error occurred because the lateral velocity of the car was relatively small. On the other hand, the distance from wheels to the lanes displayed a tendency of approximately 0.5 m. This can be verified reliably.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.1
• /
• pp.152-164
• /
• 2015

A rapid development of semiconductors, sensors and mobile network technologies has enable that the embedded device includes high sensitivity sensors, wireless communication modules and a video processing module for vehicular environment, and many researchers have been actively studying the smart car technology combined on the high performance embedded devices. The vehicle is increased as the development of society, and the risk of accidents is increasing gradually. Thus, the advanced driver assistance system providing the vehicular status and the surrounding environment of the vehicle to the driver using various sensor data is actively studied. In this paper, we design and implement the smart vehicular camera device providing the V2X communication and gathering environment information. And we studied the method to create the metadata from a received video data and sensor data using video analysis algorithm. In addition, we invent S-ROI, D-ROI methods that set a region of interest in a video frame to improve calculation performance. We performed the performance evaluation for two ROI methods. As the result, we confirmed the video processing speed that S-ROI is 3.0 times and D-ROI is 4.8 times better than a full frame analysis.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.12
• /
• pp.628-637
• /
• 2017

The automobile industry has developed Advanced Driver Assistance Systems (ADASs) to prevent traffic accidents and reduce the burden for drivers. One example is the Lane Keeping Assistance System (LKAS), which was developed for automotive vehicle systems for safety and better driving. The main system of the LKAS supports the driver while maintaining the vehicle within a lane. LKAS uses a radar sensor and camera sensor to collect information about the vehicle's position in the lane and send commands to the actuator to influence the lateral movement of the vehicle if necessary. Recently, vehicles equipped with LKAS have become commercially available. Test procedures for international LKAS evaluation are being discussed and developed by international committees, such as the International Organization for Standardization and United Nations Economic Commission for Europe. In Korea, an evaluation of LKASs for car safety is being planned by the Korean New Car Assessment Program. Therefore, test procedures should be developed for LKASs that are suitable for the domestic road environment while accommodating international standards. We developed a test scenario for LKASs and propose a formula for obtaining the target relative distance. To validate the methods, a series of experiments were conducted using commercially available vehicles equipped with LKAS.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.42 no.1
• /
• pp.181-192
• /
• 2017

Recently, many researches are carried out for Advanced Driver Assistant Systems(ADAS). Especially, many studies are carried out to analyze the road situation using road images. In order to improve the performance of the road situation analysis, it is necessary to acquire images with appropriate exposure time. In this paper, we design and implement multi exposure smart vehicular camera which provides road traffic information to driver. Proposed device can acquire road traffic information by on-board camera and various sensors. And we propose an auto exposure control algorithm for the road environment to increase accuracy of image recognition. In addition, we also propose the switching ROI method that apply existing ROI techniques to overcome a limited computation power of embedded devices. We developed prototype of multi exposure smart vehicular camera and performed experiments to evaluate proposed auto exposure control algorithm and switching ROI method. The results show that the average accuracy of image recognition increased by 13.45%.