• Journal of the Korean Applied Science and Technology
• /
• v.32 no.4
• /
• pp.639-648
• /
• 2015

Some materials of fatty acids in the biodiesel affect the physical/chemical properties like density, kinematic viscosity, total acid number and oxidation stability by forming an organic fatty acid in combination with oxygen in the air. To solve the problem of the oxidative stability of biodiesel, various kinds of antioxidant has added and analyze the characteristics of the physical/chemical property changes by the addition of antioxidant. Oxidation stability increased by the increase of additives content. The TBHQ among the seven kinds of the additives showed the best performance. Also, 4 kinds of additives like propyl gallate, butyl-amine and pyrogallo has showed above 10 hr of oxidation stability at the addition of 500 ppm. In case of pyrogallo, this is not appropriate as an additive to suitable quality standards of total acid number. TBHA, DTBHQ of hydroquinone was satisfied with the quality standard of oxidation stability but the target of this research(above 10 hr) did not satisfied with oxidation stability. Propyl gallate is also a suitable at the quality standards of total acid number but it was shown not to be an appropriate to the additives due to increasing the total acid number by increasing of the content of additives at the addition of 500 ppm.

• Journal of the Korean Wood Science and Technology
• /
• v.39 no.4
• /
• pp.359-369
• /
• 2011

The study was carried out to investigate the quality characteristics of pellets manufactured with adding soybean oil, waste soybean oil, ozonized soybean oil and ozonized waste soybean oil to Larix kaemferi Carr sawdust. The characteristics of pellet included moisture contents, heating value, ash contents, apparent densities, durabilities, absorption ratio and elementary analysis. Moisture contents were shown 7.66~9.48% which satisfied the first grade (less than 10%) of quality standard of wood pellets announced by Korea Forest Research Institute. The heating value of the manufactured wood pellets in this study exceeded the first grade of quality standard (more than 4,300 kcal/kg) and it appeared that the pellets manufactured with adding oils and ozonized oils had more heating value than the control pellets. Ash contents 0.34~0.42% also passed the first grade (less than 0.7%) of quality standard and apparent densities were adequate for the first grade (640 kg/$m^3$) on the quality standard. Durabilities of the pellets manufactured with adding soybean oil and ozonized waste soybean oil were shown over the first grade (97.5 kg/$m^3$) of quality standard. In the general results of durabilities, the pellets manufactured with additives had better values than the control pellets. After 24 hours absorption ratio experiment, absorption ratio of pellets manufactured with additives also appeared much lower moisture absorption than the control pellets and they still had the same results after 5days absorption ratio experiment. Elementary analysis of the sulfur content was satisfied the first grade (less than 0.05%) of quality standard of wood pellets and the nitrogen content was also adequate for the first grade (less than 0.3%) of quality standard of wood pellets.

• 동물약계
• /
• no.29
• /
• pp.8-11
• /
• 1996

1. 신규허가 2. 제조(수입)업 허가사항 변경 3. 뉴켓슬병 물활화백신 바이러스주 교체 4. 수의과학연구소 `토요일 전일근무제` 실시 5. 동물약품 판촉 광고시 잔류방지 표어 삽입 6. [품질관리 특별대책위원회] 개최 7. 단체명 변경 8. 동물약품의 올바른사용에 관한 세미나 개최 9. 유방염치료용 연고제제 품목 일제변경 10. 동물용의약품 안전사용 및 잔류방지 홍보용 비디오 제작 내용에 대한 감수 요청 11. '수입추천 요령' 공고 12. 춘계심포지움 안내 13. `96 농림수산 기술개발사업 과제 공모 14. `96년도 동물약품 제조용 유당 추가배정 15. 동물약품 품질관리 협의회 개최 16. 동물용 항생물질제제 검정효율화 안내 17. $\ulcorner$사료내 잔류농약 및 동물용의약품의 허용기준$\lrcorner$ 자료 수집 18. 임시이사회 개최 19. 유방염치료 연고제 첨가용색소 규격 확인 20. 유방염 연고제 첨가색소 소요량 조사 21. 품질관리 우수업체 지정 22. 클로람페니콜제제 허가변경 23. 인터넷을 통한 수출시장 안내 24. $\ulcorner$사료내 잔류농약 및 동물용의약품 허용기준$\lrcorner$ 홍보요청 25. 협회 직원 변동사항 안내

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.178.2-178.2
• /
• 2011

바이오디젤이란 식물성 기름, 동물성 지방, 폐식용유 등의 재생 가능한 자원을 촉매 존재 하에 알코올과 반응시켜 생성되는 에스테르 혼합물을 말하며 경유와 물성이 유사하므로 경유에 혼합하여 압축착화 방식인 디젤엔진에 사용할 수 있다. 그러나 바이오디젤은 경유에 비하여 탄소-탄소 간 이중결합을 가지고 있는 성분을 많이 함유하고 있기 때문에 공기에 의해 산화가 일어나기 쉽다. 일반적으로 폐놀계 향산화제인 t-buthylhydroquinone(TBHQ)를 사용하여 산화안정성을 향상시키나 국내에서 사용되는 산화방지제는 전량 수입에 의존하고 있어 제품 개발에 의한 국산화가 시급한 실정이다. 본 연구에서는 폐유지로부터 생산한 바이오디젤의 산화안정성 향상을 위하여 폐놀 및 아민계 등의 산화방지제를 합성하여 바이오디젤에 적용하였으며, 다양한 물성시험방법을 적용하여 석유 및 석유대체연료 사업법에서 규정하는 바이오디젤의 품질기준을 확인하였다. 또한 EN 14112 바이오디젤 산화안정성 시험방법으로 폐놀 및 아민계 등의 산화안정성을 확인하였다. 본 연구는 산학연 공동기술개발 1차년도 사업으로 한국화학연구원과 공동으로 수행하였으며, 산화방지제 적용평가를 통해 우수한 제품을 선정하여 2차년도에는 차량 테스트를 통해 연료 첨가제로서의 적합성을 검증할 예정이다.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1986.06a
• /
• pp.10-20
• /
• 1986

I. 윤활기유 제조시설소개 개요 1) 고급 윤활기유(HVI)생산공장으로서 그간 수입에만 의존하던 최고급 품질의 기유를 국내 수요업체에 안정공급 2) 세계 최신 공정인 Gulf Lube Oil Hydrotreating Process Type III (수소첨가 개질공정)채택 3) 국내 최초일뿐 아니라, 세계에서도 일본, 카낟에 이어 3번째로 건설 1. 고품질 제품 생산-고점도 지수, 산화안정성 및 열안정성 우수, 잔류탄소분, 윤황분, 질소분 극소, 방향족 성분 및 회분 극소, 색상 양호 2. 첨가제(특히 산화방지제 및 점도 지수 향상제)사용효과 상승으로 완제품 생산시 생산비 감소 3. 동일 VI 제품 생산기준 수율이 높음 - Hydrocarbon Structure 변화로 원료 유중 부적합성분의 윤활기유화 4. Severity 조절로 Production Mode 변경 용이 5. 양질의 부산물 생산 - HDT Naphtha, Middle distillate 6. 용제 추출기유는 원유종류 및 성상에 따라 제품특성이 결정되나, 사용가능 원유가 다양 하면서도 제품특성 및 품질이 일정함.

• Journal of the Korean Applied Science and Technology
• /
• v.32 no.2
• /
• pp.194-201
• /
• 2015

A lubricant used in the transport sector have been developed for the purpose of improving vehicle performance. To improve the engine oil for some terrible conditions, various studies have been conducted to improve vehicle performance. There are limitations in development of lubricant for the economic point, but various additives have beed developed in the technical point. Recently, government tried to prohibit reckless use of additives in base oil because of the environmental issues. The institutionalized quality standards of the additives has been estabilished. In this study, physicochemical properties and environmental effect of vehicle engine oils in domestic sector were investigated.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.110.1-110.1
• /
• 2011

최근 식물성 기름으로부터 생산된 바이오디젤의 보급이 활발해지면서, 그 원료의 안정적 확보에 대한 어려움과 원료가격 상승의 문제점이 발생하고 있다. 이러한 문제점을 극복하기 위한 대안으로 다양한 종류의 기름이 검토되고 있으며, 그 중 하나가 축산 폐유지를 이용한 바이오디젤의 생산이다. 그러나 축산 폐유지로부터 생산된 바이오디젤은 저온유동성이 열악하여 개선이 필요하다. 축산 폐유지 바이오디젤의 저온필터막힘점은 $6{\sim}8^{\circ}C$로 국내 동절기 품질 기준 $0^{\circ}C$ 이하를 만족하지 못한다. 본 연구에서는 축산 폐유지로부터 생산된 바이오디젤의 열악한 저온특성을 개선하기 위해 저온필터막힘점 개선 첨가제 6종을 사용하여 각각의 첨가제 혼합에 의한 저온유동성 개선 효과를 분석하였다. 각각의 첨가제를 1,000 ~ 5,000ppm 범위에서 폐돈지 및 폐우지 바이오디젤에 첨가하였다. 그 결과, Wintron을 제외한 나머지 첨가제는 폐돈지 바이오디젤의 저온필터막힘점을 최저 $0^{\circ}C$까지 개선할 수 있었다. 하지만 폐우지 바이오디젤의 경우, 첨가제에 의한 저온유동성 개선의 효과는 매우 적었다.

• Journal of the Korean GEO-environmental Society
• /
• v.13 no.2
• /
• pp.67-73
• /
• 2012

Asphalt pavement waste can be recycled by crushing and heating methods with additional virgin materials and additives. In this study, a new additive using Sasol wax and Polyolefin elastomer was used for improving the quality of the Superior recycled asphalt pavement(SRP). Additive was added into the recycled mixture by 1.5% and 3% of binder content in order to have PG 70-22 and PG 76-22. Both mixtures were tested by Marshall apparatus, indirect strength testing methods, toughness testing methods, moisture susceptibility testing methods and wheel tracking testing methods. Test results met the standards of KS F 2349 and GR F 4005. Through research, it was found that these special recycled mixtures could be applied for the surface and base course of heavy traffic roads or equivalents. About 13,000 tons of the recycled mixture has been applied on Seoul Olympic road to provide new road to Hangang park for Seoul citizens.

• Proceedings of the Korean Society of Grassland Science Conference
• /
• 1999.06a
• /
• pp.92-93
• /
• 1999

매년 전국 각지의 산지에서 대량으로 생산되고 있는 육림부산물의 사료화를 통해 사슴용 자급조사료 및 값싼 사료자원의 개발을 목적으로 이들의 안정적인 이용 및 저장을 위해 암모니아수, 맥주박, 발효제, 효소제 등을 첨가하여 발효화를 시도 그에 대한 발효품질을 검토하였다. 육림부산물 생산현황은 12-17종의 각종 잡관목 및 야초류로 구성되어 있으며 특히 잡관목류가 현물기준으로 전체의 약 6-70%를 차지하고 4.12.8t/ha의 생산량을 나타내고 있다.(중략)

• Journal of the Korean Wood Science and Technology
• /
• v.45 no.3
• /
• pp.258-267
• /
• 2017

In this study, pitch pine (Pinus rigida, PIR) and Mongolian oak (Quercus mongolica, QUM) pellets were fabricated with bark or/and drying waste liquor (DWL) of larch (Larix kaempferi, LAK) as an additive. Based on the results of fuel characteristics of the pellets, optimal conditions for producing the high-quality pellets were provided. In the analysis of chemical composition, bark contained holocelluose and lignin of 90% and over. DWL had 0.1% solid assumed to sugars which are generated from the oven-drying of LAK logs. QUM showed high ash content (2.2%) by containing of bark in the sawdust. Bark and DWL of LAK had high ash content of 4% and over. Calorific values of all specimens and additives were higher than that of the $1^{st}$-grade standard of wood pellets designated by NIFOS (18.0 MJ/kg). PIR and QUM pellets were fabricated with additive of 2 wt% based on the solid weight of oven-dried sawdust using a piston-type flat-die pelletizer, and thus ash content and calorific value of the pellets did not affect by the use of additive. Durability of the pellets increased with the use of additive. Durabilties of pellets, which were fabricated with bark as an additive and DWL as a controller of moisture content for sawdust, did not differ from those of pellets without additives and were lower than those of pellets either with bark or DWL. However, use of both bark and DWL for the production of wood pellets might be favorable because it can make a profit from the collection process of DWL. Based on the results of fuel characteristics of the pellets, QUM and PIR pellets were produced by a flat-die pelletizer. Moisture content (MC), bulk density and durability of the pellets improved with the use of additive. Particularly, sawdust MC of 10% and the addition of bark or DWL for PIR as well as sawdust MC of 12% and the addition of bark for QUM might be optimal conditions for the production of high-quality pellets. Except for the ash content of QUM pellets, other properties of PIR and QUM pellets exceeded the $1^{st}$-grade wood pellets standards of NIFOS.