• 한국지구과학회:학술대회논문집
• /
• 2006.02a
• /
• pp.111-115
• /
• 2006

최근 경기도 가평지역에서 새로운 철운석이 발견되었으며, 이는 한반도에 낙하(fall) 또는 발견(find)된 운석 중 다섯 번째 기록이다. 가평운석(가칭)은 북위 $37^{\circ}52'08'$, 동경$127^{\circ}27'54'$, 고도 147m 지점에서 발견되었으며, 운석의 분류상 철운석에 속한다. 가평운석의 표면은 지표상에서 풍화를 받은 흔적이 나타나나, 내부는 비드만스태튼 무늬(Widmanstatten pattern)와 같은 철운석의 특징이 잘 보존되어 있다. 가평운석의 암석학적, 광물학적 기재와 분류를 위해 주사전자현미경(Scanning Electron Microscope) 및 전자 현미분석기(electron probe micro-analyzer)를 이용했다. 풍화의 산물인 철산화물이 나타나는 최외각부를 제외하면 가평 운석은 거의 순수한 철-니켈 금속광물(Fe-Ni metal)로 이루어져 있다. 이 중 니켈 함량이 적은 카마사이트(kamacite)가 대부분이며 소량의 태나이트(taenite)가 산출되어 비드만스태튼 무늬를 구성한다. 비드만스태튼 무늬의 특징에 의한 분류에 따르면 가평운석은 중립질 또는 조립질 옥타헤드라이트(octahedrite)에 속한다. 철운석은 화학적으로 열 개 이상의 하부그룹으로 세분되며, 가평운석의 정확한 하부그룹으로의 분류는 친철원소에 대한 미량분석이 추가적으로 필요하다. 가평운석의 냉각률은 $^{\sim}1^{\circ}C/Ma$이하로 나타나며, 이는 가평운석이 천천히 냉각된 비교적 규모가 큰 소행성의 핵에서 유래했음을 지시한다.

• 한국지구과학회:학술대회논문집
• /
• 2006.02a
• /
• pp.230-234
• /
• 2006

본 연구에서는 미분화 운석 중 오디너리 콘드라이트를 주사전자 현미경으로 관찰하여 열변성, 충격 변성 정도, 지구상에서의 풍화 정도에 따라서 그 구성 성분과 조직이 어떤 변화를 보이는지 알아보았다. 이를 위해 15개의 오디너리 콘드라이트에 대해 각각 연마편 및 연마박편을 준비하였으며, 주사전자 현미경 사진을 이용하여 열변성 단계별로 콘드률과 기질의 경계를 비교하였다. 열변성이 증가할수록 콘드률과 기질의 경계는 점차 모호해 진다. 충격변성을 받았는지의 유무는 감람석을 관찰하여 비교적 쉽게 인지할 수 있다. 충격변성을 받지 않은 콘드률 내의 감람석은 완전 소광과 불규칙적인 깨짐을 보이지만 충격변성을 받은 경우 파동소광과 규칙적인 깨짐을 보인다. 지구상에서 풍화를 받은 경우 철-니켈 금속의 산화가 가장 먼저 진행된다. 풍화에 의한 철산화물은 맥상으로 나타나거나 기존의 철-니켈 금속을 치환하여 나타난다. 철산화물에 의해 풍화를 받은 콘드라이트는 전체적으로 갈색을 띄게 된다.

• Journal of Energy Engineering
• /
• v.2 no.3
• /
• pp.300-307
• /
• 1993

To develop high performance nickel-iron secondary battery, the characteristics of charge-discharge reaction of iron electrode were examined by cyclic voltammetry technique, SEM and XRD analysis. The capacity of the test electrodes was determined by the constant current charge-discharge method. It was found that the temperature and concentration of electrolyte were the major determinant factors of electrode capacity, and especially the 1st discharge capacity was increased with the increase of temperature. The effect of fore forming agent on the electrode capacity was negligible. The electrode capacity was above 350 ㎃h/g(36% utility) at 0.25C discharge rate. The stability of electrode was very good, but the activation occurred slowly.

• Korean Journal of Mineralogy and Petrology
• /
• v.36 no.3
• /
• pp.167-183
• /
• 2023

The Janggun Pb-Zn deposit consists of Mn orebody, Pb-Zn orebody and Fe orebody. The Mn orebody composed of manganese carbonate orebody and manganese oxide orebody on the basis of their mineralogy and genesis. The geology of this deposit consists of Precambrian Weonnam formation, Yulri group, Paleozoic Jangsan formation, Dueumri formation, Janggum limestone formation, Dongsugok formation, Jaesan formation and Mesozoic Dongwhachi formation and Chungyang granite. This manganese carbonate orebody is hydrothermal replacement orebody formed by reaction of lead and zinc-bearing hydrothermal fluid and Paleozoic Janggum limestone formation. The wallrock alteration that is remarkably recognized with Pb-Zn mineralization at this hydrothermal replacement orebody consists of mainly rhodochrositization with minor of dolomitization, pyritization, sericitization and chloritization. Carbonates formed during wallrock alteration on the basis of paragenetic sequence are as followed : Ca-dolomite (Co type, wallrock) → ankerite and Ferroan ankerite (C1 type, early stage) → ankerite (C2 type) → sideroplesite (C3 type) → sideroplesite and pistomesite (C4 type, late stage). This means that Fe and Mn elements were enriched during evolution of hydrothermal fluid. Therefore, The substitution of elements during wallrock alteration beween dolomitic marble (Mg, Ca) and lead and zinc-bearing hydrothermal fluid (Fe, Mn) with paragenetic sequence is as followed : 1)Fe ↔ Mn and Mn ↔ Mg, Ca, Fe elements substitution (ankerite and Ferroan ankerite, C1 type, early stage), 2)Fe ↔ Mn, Mn ↔ Mg, Ca and Mg ↔ Ca elements substitution (ankerite, C2 type), 3)Fe ↔ Mn, Fe ↔ Ca and Mn ↔ Mg, Ca elements substitution (sideroplesite, C3 type), and 4)Fe ↔ Mg, Fe ↔ Mn and Mn ↔ Mg, Ca elements substitution (sideroplesite and pistomesite, C4 type, late stage)

• Applied Chemistry for Engineering
• /
• v.5 no.1
• /
• pp.44-53
• /
• 1994

A study on the iron electrode which is a good material for alkaline battery because of its superior characteristics including high theoretical capacity density, low toxicity, low cost and inexhaustible supply was performed to develop high performance nickel-iron secondary battery. The characteristics of chrage-discharge reaction were examined by cyclic voltammetry technique SEM and XRD analysis. The capacity of the test electrodes was determined by the costant current charge-discharge method. It was found that the purity and particle size of iron material were the major determinant factors of electrode capacity. With the addition of $Na_2S$ into the electrolyte the capacity of electrode was increased about 20 % caused by the prevention of passivation and the increase of hydrogen overpotential. The stability and capacity of electrode were increased with the use of Ni-fibrex and foamed Ni collectors and also depended on the sintering temperature. The capacity of electrode was 350 mAh/g(0.2 C) which corresponded to 36% utility.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2001.06a
• /
• pp.185-188
• /
• 2001

본 논문에서는 의복의 2D패턴을 구성하여, 3D모델을 자동생성하는 방법을 제안한다. 먼저, 의복의 2D CAB 패턴으로부터 여러가지 의복 2D모델을 자동생성한 후, 의복 패턴별 2D모델을 붕합(Seaming)하여 3D모델을 생성한다. 봉합과정에서 B-Spline을 이용하여 인체의 굴곡과 의복의 공극을 고려하여 의복착용 후의 3D모델을 재구성하고, Z-buffer를 개량한 저리버퍼를 사용한 선적분을 통하여 3D모델을 구성하고 있다. 이때 의복의 3D 모델의 구조에 따라 부분적으로 의복 표면의 인체가 노출되는 현상을 검색하여( Collision Detection ), 의복 3D 모델을 부분적으로 수정하고 있다. 나아가서, 의복 원단에 대한 텍스처DB를 구축하여 다양한 색상의 의복을 코디할 수 있다.

• Journal of the Korean Society for Precision Engineering
• /
• v.7 no.2
• /
• pp.14-27
• /
• 1990

Electromagnetic Pulse Forming is the one of the high velocity forming method. When the electric energy which is charged in the capacitor bank is suddenly discharged into the electromagnetic coil, the high magnetic field occurs at the airgap between the electromagnetic coil and workpiece. Thus we can obtain the high electromagnetic pressure, which is proportional to the square of magnetic flux density. This is the basic principle of the electromagnetic pulse forming. In this paper, the equivalent L-R-C circuit is derived by computing the magnetic field and its loss of the total system. Thus, the values of the magnetic flux density and pressure can be obtained from the equation of this circuit. As a result, the computed and measured values of the maximum magnetic flux density and pressure are compared and the characteristics of the tapered field shaper are further discussed as follows; 1) The strength of magnetic flux density and pressure can be controlled by the charged energy and the size of the airgap between the inner field shaper and the workpiece. 2) During the design of the tapered field shaper, the penetration of the magnetic flux through the sharp edge should be considered.

• Korean Journal of Mineralogy and Petrology
• /
• v.36 no.3
• /
• pp.199-212
• /
• 2023

Diffusion is a powerful tool to understand geological processes recorded in terrestrial rocks as well as extraterrestrial materials. Since the diffusive exchange of elements or isotopes may have occurred differently in the solar nebula (high temperature and rapid cooling) and on the parent bodies (fluid-assisted thermal metamorphism at relatively low temperature), it is particularly important to model elemental or isotopic diffusion profiles within the mineral grains to better understand the evolution of the early solar system. A numerical model with the finite difference method for the fast grain boundary diffusion was established for the exchange of elements or isotopes between constituent minerals in a closed system. The fast grain boundary diffusion numerical model was applied to 1) ²⁶Mg variation in plagioclase of an amoeboid olivine aggregate (AOA) from a CH chondrite and 2) Fe-Mg interdiffusion between chondrules, AOA, and matrix minerals in a CO chondrite. Equilibrium isotopic fractionation and equilibrium partitioning were also included in the numerical model, based on the assumption that equilibrium can be reached at the interfaces of mineral crystals. The numerical model showed that diffusion profiles observed in chondrite samples likely resulted from the diffusive exchange of elements or isotopes between the constituent minerals. This study also showed that the closure temperature is determined not only by the mineral with the slowest diffusivity in the system, but also strongly depends on the constituent mineral abundances.

• Journal of the Mineralogical Society of Korea
• /
• v.23 no.4
• /
• pp.281-295
• /
• 2010

This paper deals with magnetic susceptibility, mineralogy, soil properties (pH, EC, CEC, loss on ignition), iron and manganese oxides, the content and partitioning of heavy metals (As, Cd, Cr, Cu, Ni, Pb, Zn), and their mutual relationship in the soil samples of an unpolluted, abandoned mine area, and industrial complex area. The various minerals derived from weathered bedrock were identified by X-ray diffraction in the unpolluted soil samples, except for the magnetic minerals. XRD analysis also revealed the existence of hematite and magnetite related to mine tailings and waste rocks in the abandoned mine area samples. The industrial complex area samples had carbonate minerals, such as calcite and dolomite, that might be due to anthropogenic deposition. The sum of the reducible, oxidizable, and residual fractions was over 80% for the abandoned mine area samples and over 50% for the industrial complex area samples using the sequential extraction method. The industrial complex area samples had a relatively high carbonate fraction that was associated with carbonate minerals. The content of aqua regia-extractable Fe, Mn, As, and Zn had a high positive correlation with the content of the dithionite-citrate-bicarbonate (DCB)-extractable method related to Fe/Mn oxide phases. The 54% and 58% of aqua regia-extractable Fe and As content, respectively, acted together with the concentrations of the DCB-extractable phases. Magnetic susceptibility values of total samples ranged from 0.005 to $2.131{\times}10^{-6}m^3kg^{-1}$. The samples including iron oxide minerals, such as hematite and magnetite, had a high magnetic susceptibility. The magnetic susceptibility showed a significant correlation with the heavy metals, Cd (r=0.544, p<0.05), Cr (r=0.714, p<0.01), Ni (r=0.645, p<0.05), Pb (r=0.703, p<0.01), and Zn (r=0.496, p<0.01), as well as Fe (r=0.608, p<0.01) and Mn (r=0.615, p<0.01). The aqua regia-extractable Fe and Mn content had a significant positive correlation with Cd, Cr, Cu, Ni, and Zn. However, the DCB-extractable Fe and Mn content had a significant positive correlation with As and Ni, indicating that the heavy metals were associated with Fe and Mn oxide minerals.

• Journal of the Mineralogical Society of Korea
• /
• v.17 no.4
• /
• pp.357-364
• /
• 2004

Mineral chemistry of talc from the Dongyang talc deposits was studied to characterize the differences between dolomite-origin talc (talc I) and tremolite-origin talc (talc II). Average iron and aluminum contents are higher in talc II, 2.18 wt% FeO and 0.31 wt% $Al_2$O$_3$), than in talc I, 1.48 wt% FeO and 0.08 wt% $Al_2$O$_3$). Consistently lower Mg/(Mg+Fe+Mn) ratios and higher AI concentrations with uniform values of talc II compared to talc I seem to reflect the compositional differences of the original materials, tremolite and dolomite, respectively. Relative enrichment of Al as well as Fe in talc II compared to tremolite can be attributed to their immobile behaviors during alteration process and the rapid diffusion of hydrothermal fluids, which can accelerate instantaneous nucleation with immaturity growth of talc II. Increase in the concentrations of talc II can lower the ore grade by increasing concentrations of impure components such as AI and Fe, and by abundant presence of tremolite as well.