• Journal of Environmental Science International
• /
• v.19 no.7
• /
• pp.917-929
• /
• 2010

This paper aims to find out the statistical characteristics of the weather related railroad accidents and incidents. Data from Korea Railroad Operation Information System(KROIS) and Korea Railroad Accidents reports during 1996-2008 were used to investigate the occurrence frequency of railroad accidents and operation obstacles and their association with weather phenomena. The results are as follows; The occurrence frequency of railroad accidents and operation obstacles decrease gradually, and most of railroad accidents is a railroad traffic accidents. The amount of damages by a railroad weather-related accidents is higher than those of the railroad accidents and operation obstacles. It was also found that weather events influencing the railroad weather-related accidents and incidents are rainfall, snowfall, lightning, winds. And they caused a railroad weather-related accidents and incidents, such as railway obstruction, signal failure, and power supply failure. Therefore we need research about threshold review and a quantitative and qualitative analysis of a railroad weather-related accidents and incidents according to climate change.

• Journal of Digital Contents Society
• /
• v.18 no.2
• /
• pp.393-401
• /
• 2017

As the importance of software in various industry areas has been increased, the number of accidents related to software safety are growing up. The key industries such as railroads, aviation and medicine, recommend IEC 61508 and international safety standards for their own to achieve functional safety and reduce the issues caused by that. For equipment of ship navigation, there are not any particular standards or guidance which Korean users can introduce as considering software functional safety. This article defines the procedure and outcomes of the risk analysis in order to secure software functional safety in marine navigational equipment and applies them to an echo sounder as a case study.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.5
• /
• pp.2559-2566
• /
• 2014

Recently, safety accident by misstep at the gap between the platform and railway vehicle have frequently occurred to the mobility handicapped including disabled person, children etc. in metropolitan subway region. Particularly, because the curved platform's gap from platform to railway vehicle is max. 260mm it is important to securement of the passenger's safe mobility right. So it is necessary to platform safety step equipment for needs technology to interface gap between the platform and railway vehicle. In this study we examined the function & production requirements of platform safety step and performed the conceptual design considering the crash safety and maintenance easiness. Moreover, considering various performance requirements we suggested step's operation procedure & control flowchart.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.14 no.1
• /
• pp.117-124
• /
• 2010

Different to other social infrastructures, bridge elements or bridges can be damaged or collapsed and this may cause death toll and severe social and economical damage, bridges should be managed to maintain a safety level. Diverse strengthening methods is developed to improve a deteriorated bridge performance up to original design level. But rational decision-making process and methodologies to select a optimum strengthening method are absence yet in Korea. This paper therefore derived items and proposed methodologies for quantity estimate considering uncertainty to select a optimum strengthening method among conceptually designed alternatives. And also, to demonstrate the applicability and verification of the proposed approach, it was applied to select the optimum strengthening method for the deteriorated T-shape concrete girder bridge. The model and the procedure can greatly contribute to the uncertainty-oriented alternative selection.

• Journal of Internet Computing and Services
• /
• v.20 no.3
• /
• pp.1-11
• /
• 2019

Today's software systems are becoming larger and more complicated, and the risk of accidents and failures have also grown larger. Software failures and accidents in industrial fields such as automobiles, nuclear power plants, railroad industries, etc. may lead to severe damage of property and human life. The safety-related international standards, such as IEC 61508 have been established and applied to industries for decades. The safety life cycle specified in the standards emphasize the activities to develop safety requirements through hazard and risk analysis in the early stage of software development. In this paper, we propose 'Hazard Analysis Process based on STPA using SysML' in order to ensure the safety of software at the early stage of software development. The proposed hazard analysis can be effectively performed minimizing the loss of hazard by using the BDD and the IBD of SysML to define the control structure of a system. The proposed method also improves the specification of the safety constraints(requirement) by using SD. As a result, it is possible to identify the hazard without missing and identify the hazard scenarios in detail, and safety can be sufficiently ensured in the early stage of software development.

• Korean Journal of Construction Engineering and Management
• /
• v.25 no.1
• /
• pp.13-22
• /
• 2024

On January 8, 2021, the Act on the Punishment of Severe Disasters passed the Legislation and Judiciary Committee and has been in effect in earnest since January 2022. However, safety accidents at construction sites are still continuing, and it is necessary to discuss ways to improve the safety awareness of construction workers. Therefore, in this study, data were collected through a survey of construction site workers, and the effect of the organizational climate of the workplace on the level of safety consciousness of workers was studied. As a result of the study, the factors of organizational structure, guaranteeing autonomy and consideration of supervisors among the organizational climate of the workplace had a positive effect on the improvement of workers' safety awareness. Based on this, this researcher suggested that workers should be delegated the authority to perform some tasks according to the situation and content of the work during the field work and that incentives should be compensated according to performance.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.7
• /
• pp.4863-4870
• /
• 2015

Currently, as a priority to secure the safety of the railway signalling system, verification for satisfy of the safety integrity requirements(SIR) is required to the essential elements. Safety Integrity Requirements(SIR) verification is performed based on the system safety analysis. But the probability of securing basic data for system safety analysis significantly dropped because there is no experience yet performed in the country. Therefore we are had to rely on a qualitative analysis. There are methods such as qualitative risk analysis matrix, and risk graphs. The qualitative analysis is wide, the width of the accident. However, the reliability of the result is significantly less has a disadvantage. Therefore, it should be parallel quantitative safety analysis of the system/products in order to compensate for the disadvantages of the qualitative analysis. This paper presents a quantitative safety analysis method to overcome the disadvantages of the qualitative analysis. And through a result, highly reliable Safety Integrity Requirements(SIR) verification measures proposed. Verification results, the dangerous failure incidence for vital data processing device was calculated to be $1.172279{\times}10^{-9}$. The result was verified to exceed the required safety integrity targets more.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.6 no.2
• /
• pp.26-33
• /
• 2007

Social cost has been increased by traffic accident and congestion since early 1990s. The construction of roadways and railways has been suggested as countermeasures. However, ITS has finally introduced as a logical solution because the expenses of infrastructures are costly. The data collection field has developed through numerous researches and pilot projects. However the information provision field does need a lot of study. The traffic information broadcasting whether simple traffic information or the value-added information has been available via radio, television and internet which does not require tremendous investment compared with data collection stage. Therefore, this study reviews the suitability of the gadget service usually offered by window vista users which is the result of the development of technology and the changes of internet environment. It also suggests to using the RSS(Really Simple Syndication) manner as a basic method to provide the traffic information based on the needs of user in order to enhance the usability of traffic information. For this, this study analyzes the current methods and techniques of traffic information service which is widely available by local governments and companies and suggest possible changes and methods in order to provide Gadget-based service to the public.

• Journal of the Korea Institute of Building Construction
• /
• v.16 no.3
• /
• pp.271-278
• /
• 2016

In the case of South Korea, steel girder bridge (steel box or H-steel) and PSC (Pre-Stressed Concrete) girder bridge are the representative upper structures of railroad and road bridges. These structures account for 75% of the total bridge constructions and 80% of the total construction cost. Since the form work for concreting bridge slab is difficult, various construction methods developed and applied. However, several problems in those methods did not solve partially, including cost increase by material loss and rise of labor costs, quality deterioration by unskilled workers, increased construction time by complicated method, reduced productivity, safety accident by high place work, difficult transportation by big member, and rise of maintenance cost by material characteristic. Alternative method is needed to solve problems of as-is methods. Therefore, the purpose of this study is development of the purlin hanging system form for the girder bridge slab and its economic analysis. Through the findings of this study, it was verified that the purlin hanging system form is possible 60% reduction in cost and 80% reduction in time as comparison with conventional method.

• The Journal of Engineering Geology
• /
• v.5 no.1
• /
• pp.1-20
• /
• 1995

A train overturn accident occurred on March 1993 in the Gupo area, northern part of Pusan, unfortunately had taken a heavy toll of lives and caused a great loss of property as well. The reasons for the subsidence of the basement under the railroads, which presumed to be the main cause of the accident, have been investigated from many different angles, including conventional geotechnical investigation methods. The deduced nuin reasons of the subsidence were: 1. blasting for tunnel excavation (NATM) at about 39 meter under the railroads, and 2. unexpected change of bedrock conditions along the direction of tunnel. But this accident was derived nrranlv from the lack of geological and geotechnical information under railroad area because it was impossible to drill beneath the railroads. This paper introduces a new geophysical survey techniqueseisrnic geotomography, and shows some results of the method applying to investigate the underground structure of the accident area. This method not only overcomes the unfavourable environment which many conventional investigation methods cannot face, but produces an image of underground structure with high resolution. Furthermore, the outputs from geotomogaphic analysis could provide very valuable in-situ basic parameters (like seismic velocities, elastic moduli, etc.) which is essential to the design and construction.