• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.36C no.8
• /
• pp.1-9
• /
• 1999

Timing-level circuit analyses are used to obtain fast and accurate results, and the analysis of gate and interconnect delay is necessary to validate the correctness of circuit design. This paper proposes an efficient algorithm which simultaneously calculates the gate delay and the transition time of linearized voltage source for subsequent interconnect delay calculation. The notion of effective capacitance is used to calculate the gate delay and the transition time of linearized voltage source which considers the on-resistance of driving gate. The procedure for obtaining the gate delay and the transition time of linearized voltage source has been developed through an iterative operation using the precharacterized data of gates. While previous methods require extra information for the transition time calculation of linearized voltage sources, our method uses the derived data during the gate delay calculation process, which does not require any change in the precharacterization process.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.5
• /
• pp.367-375
• /
• 2017

RANS computational analysis was performed on the head of the launch vehicle including the hammerhead nose pairing in the supersonic regime. The two-dimensional axisymmetric analysis was performed by using laminar, fully turbulent and transition models and compared with the experimental data. It was observed that different flow phenomena occurred depending on the Reynolds number. Under the high Reynolds number condition, the boundary layer becomes turbulent, which is not separated from the surface of the launch vehicle. With the low Reynolds number condition, laminar separation bubble was produced due to the separation and reattachment of the boundary layer on the expansion-compression edge of the hammerhead type nose fairing. The three-dimensional computations with the angle of attack showed a fully detached vortical structure due to the laminar separation bubble. It is proved that the turbulent transition should be considered to predict the separation bubble with the Reynolds number.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.10
• /
• pp.998-1011
• /
• 2010

For preparing Korean lunar missions, an Earth-Moon transfer trajectory is designed and analyzed using finite thrust. To be a more realistic scenario, kick motor's performance which is used for TLI (Trans Lunar Injection) maneuver is assumed to have a certain maximum capability. Under this assumption, optimal Earth-Moon transfer trajectory analysis is made from the beginning of Earth departure to the final lunar closest approach. As a results, optimal Earth-Moon transfer trajectory solutions with finite thrust are compared to those of designed with impulsive thrust in previous study. It is confirmed that if the trajectory solutions derived with impulsive burn is directly applied to estimate the finite burn trajectory solutions, careful consideration for finite burn losses must be paid as for TLI maneuver. Presented algorithm and various results will give numerous insights into the future Korea's Lunar missions using finite thrust engines.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.6B
• /
• pp.1142-1148
• /
• 1999

In this paper, the characteristics of frequency dependent dispersion are analyzed for the phase shifters in Ku-band phased array antenna system using full-wave method, SDA(Spectral Domain Approach).The design technique of asymmetric coupled-line phase shifter with dielectric overlay is proposed. The compared results of phase responses are shown with conventional symmetric coupled-line Schiffman phase shifter. The experimental results verify the improvement of broadband characteristics by the increasing bandwidths and the decreasing phase deviations.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1995.05b
• /
• pp.659-665
• /
• 1995

액체금속로는 기존의 가압경수로와는 달리 55$0^{\circ}C$ 정도의 고온에서 운전이 되므로 고온 열응력이 중요한 문제로 대두되며 따라서 고은에서의 크립(Creep) 변형, 반복되는 기동과 정지 등으로 인한 되풀이 소성변형, 라체팅(Ratchetting), 크립과 소성의 상호작용 및 크립과 피로의 상호작용 등의 평가에 대한 기술 확립과 고온구조물에 대한 우리의 독자적인 설계방법을 개발하는 것이 필요하다 본 연구에서는 범용 유한요소해석코드인 ABAQUS의 축대칭 요소를 이용해서 액체 금속로 원자로용기와 이에 부착된 열소매(Thermal sleeve)를 Y-형태의 구조물로 모델링하여 반복되는 열천이하중에 대한 비탄성 구조해석을 수행하고 크립효과에 대한 영향을 분석하였다. 해석결과 액체금속로와 같은 고온구조물에 대하여 반복 열천이 하중과 고온 지속시간이 유발하는 크립효과가 크게 나타남을 알 수 있었다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.3
• /
• pp.207-215
• /
• 2020

Design of a shape transition nozzle is carried out as a part of building a lab-scale supersonic combustion experimental equipment. In order to connect directly the circular shaped vitiation air heater to the square shaped scramjet combustor, area change is evaluated by using the method of characteristics. Shape transition function is introduced to control the transition rate. Boundary layer correction was made through the three-dimensional computational fluid dynamics with the assessment on the several shape transition functions. The shape transition nozzle is proved minimizing the growth of boundary layer at the center of the rectangular nozzle surfaces that caused by the pressure gradient at the corners of the rectangular nozzle and the following recirculation regions.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.13 no.4
• /
• pp.101-109
• /
• 1993

On the basis of Nikuradse laboratory experiments. two transition flow regimes are defined with respect to the characteristics of boundary layer. One is the transitional turbulent flow which has a transitional characteristics between smooth turbulent flow and rough turbulent flow, and the other may be called as transitional laminar flow which has transitional features between laminar flow and turbulent flow. The laboratory results of Nikuradse are carefully re-examined, and the flow regions are clearly defined. The velocity profile of the transitional turbulent flow is described by newly formulated equation, and the Darcy-Weisbach friction coefficient for the transitional turbulent flow is determined based on the theoretical form of profile equation, which is far better accurate than Colebrook-White equation. Difficulties still arise for the description of velocity profile when the flow undergoes from laminar to turbulent. In this case a linear interpolation procedure is proposed for the estimation of friction coefficient.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.16 no.2
• /
• pp.179-184
• /
• 2006

An intuitive understanding of the dynamic pattern generation in asymmetric networks may be considered an essential component in developing models for the dynamic information processing. It has been reported that the neural network with cyclic connections generates multiple limit cycles. The dynamics of discrete time network with cyclic connections has been investigated intensively. However, the dynamics of a cyclic connection neural network in continuous-time has not been well-known due to the considerable complexity involved in its calculation. In this paper, the dynamic behavior of a continuous-time cyclic connection neural network, in which each neuron is connected only to its nearest neurons with binary synaptic weights of ${\pm}1$, has been investigated. Furthermore, the dynamics and stability of the network have been analyzed using a piece-wise linear approximation.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.5
• /
• pp.403-413
• /
• 2010

Transition location of boundary layers over airfoils is predicted by using PSE(Parabolized Stability Equations) and $e^N$-method. Growth rates of disturbances are obtained from the PSE analysis and the N-factor curves are calculated by integrating the growth rates. The computational code developed in the present study is validated by comparing the computed results with the well known data for the cases of flat plate boundary layers and airfoils. Predictions of transition location are made for the boundary layers over NACA0012, NLF(1)-0414F, and NLF(1)-0416 airfoil. Predicted transition locations are found to be in good agreement with the experimental data.

• Bulletin of the Korean Space Science Society
• /
• 2009.10a
• /
• pp.40.2-40.2
• /
• 2009

이 연구에서는 달천이(TLI: Trans Lunar Injection) 및 달포획(LOI: Lunar Orbit Injection) 기동 시 대전 지상국의 가시성을 고려한 최적의 임무를 설계하였다. TLI 기동은 탐사선이 지구 주차궤도에서 지구-달 천이궤적으로 진입하기 위하여 주어지는 기동이며, LOI 기동은 탐사선이 지구-달 천이궤적에서 달의 중력권으로 진입하기 위하여 주어지는 기동이다. TLI 및 LOI 기동 시 대전 지상국에서의 가시성의 확보는 실제적인 미래 한국의 달 탐사를 대비하였을 때 중요한 요소이다. 따라서 이 연구에서는 TLI 및 LOI 기동 시 대전 지상국에서의 가시성을 모두 고려하여, 최소연료로 지구 주차궤도에서 달 임무궤도 진입까지의 모든 단계에 대해 임무설계를 실시하였다. TLI 및 LOI 기동 시 추력은 순간 추력(Impulsive thrust)로 가정하였으며, KSLV-II 발사체의 성능을 적용하여 설계하였다. 임무 설계 시 태양, 지구, 달의 섭동력을 고려한 N체 운동 방정식을 탐사선에 적용하였으며, 지구의 비대칭 중력장, 태양 복사압, 달의 J2 섭동에 의한 영향도 고려하였다. JPL의 정밀 천체력인 DE405를 사용하였고, 상용 소프트웨어인 SNOPT(Spares Nonlinear OPTimizer)를 이용하여 비행 궤적의 최적해를 도출하였다. 임무 설계 결과를 통해, 대전 지상국의 가시성을 고려한 TLI 및 LOI 기동의 크기에 의한 임무설계의 분석을 수행하였다. 또한 최적화된 달 탐사 임무의 단계별 기동의 크기와 지구-달 천이 궤적의 형상 및 다양한 임무 요소들의 해석을 도출하였다.