• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.11
• /
• pp.975-982
• /
• 2009

The purpose of this study is to offer informations about the current conditions and basic data of stream sediments in Busan city. So we first select 14 urban streams and collect sediment samples. Then, COD, proximate analysis, volatile solid, organic carbon content and elemental analysis were conducted to determine characteristics of the sediments. Results show that COD, volatile solid, Organic carbon content, T-N of sediment are determined in the range of 1.20~75.07 mg/g, 0.19~11.54%, 0.23~34.21% and 0.76~3.46%, respectively. Analysis data of sediments were compared with USEPA sediment quality standards and ontario sediment quality guidelines. As a result, when compared with COD, volatile solid and organic carbon content values, Bosucheon and Gudeokcheon are relatively heavily contaminated than the remainder sampling sites. But when compared with T-N values, all of sites were evaluated as seriously contaminated. Finally, for the determination of the correlations between sediment COD and moisture contents, ash contents, volatile solid, total organic carbon, total nitrogen and total carbon, linear model was fitted to the data using a least-squares algorithm. As a result, Linear model was well fitted to each data with good values of the correlation coefficient (r=0.9664~0.8501).

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.11
• /
• pp.26-41
• /
• 2016

Catchment Hydrologic Cycle Assess Tool (CAT) is a model for hydrologic cycle assessment based on physical parameters. In this study, CAT was applied for short-term runoff simulation and connected with model-independent parameter estimation (PEST) for auto-calibrating parameters. The model performance was compared with HEC-HMS, which is widely used for short-term runoff simulation. The study area is the Pangyo Watershed ($22.9km^2$), which includes the Unjung-Cheon and Geumto-Cheon tributaries of the Tan-Cheon stream. Simulation periods were selected from six rainfall events of a two-year period (2006-2007). For the runoff simulation, CAT was applied using three types of infiltration methods (excess rainfall, Green and Ampt and Horton). Sensitivity analysis was carried out to select the parameters and then CAT was optimized using PEST. The model performance of HEC-HMS and CAT-PEST for the rainfall events were within an acceptable limit with Nash Sutcliffe efficiencies (NSE) of 0.63-0.91 and 0.42-0.93, respectively. The simulation results of HEC-HMS have high accuracy in the case of rainfall events that have a sensitive relationship between initial soil moisture conditions and runoff characteristics. The results of CAT-PEST indicated the possibility of reflecting a real runoff system using various physical parameters.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.1
• /
• pp.36-44
• /
• 2007

This paper presented a hybrid ternary encoding scheme using 3-valued logic. It can adapt to the delay-insensitive(DI) model. We designed an asynchronous wrapper for the hybrid ternary encoding scheme to communicate with various asynchronous encoding schemes. It reduced about 50% of transmission lines and power consumption compared with the conventional 1-of-4 and ternary encoding scheme. The proposed wrappers were designed and simulated using the $0.18-{\mu}m$ standard CMOS technology. As a result, the asynchronous wrapper operated over 2 GHz communicating with a system bus. Moreover, the power dissipation of the system bus adapted the hybrid ternary encoding logic decreases 65%, 43%, and 36% of the dual-rail, 1-of-4, and ternary encoding scheme, respectively. The proposed data encoding scheme and the wrapper circuit can be useful for asynchronous high-speed and low-power asynchronous interface.

• Journal of the Society of Naval Architects of Korea
• /
• v.30 no.1
• /
• pp.65-72
• /
• 1993

A numerical method for nonlinear free-surface-wave problem is developed in this paper. The final goal of this study is to simulate the towing tank experiment of a ship model and to partially replace the experiment by the numerical model. The exact problem in the scope of potential flow theory is formulated by a variational principle based on the classical Hamilton's principle. A localized finite element method is used in the present numerical computations which made use of the following two notable steps. The first step is an efficient treatment of the numerical radiation condition by using the intermediate nonlinear-to-linear transition buffer subdomain between the fully nonlinear and linear subdomains. The second is the use of a modal analysis in the final stage of the solution procedures, which enables us to reduce the computation time drastically. With these improvements the present method can treat a much larger computational domain than that was possible previously. A pressure patch on the free surface was chosen as an example. From the present computed results we could investigate the effect of nonlinearity on the down-stream wave pattern more clearly than others, because much larger computational domain was treated. We found, specifically, the widening of the Kelvin angle and the increase of the wave numbers and the magnitude of wave profiles.

• The Journal of the Acoustical Society of Korea
• /
• v.32 no.2
• /
• pp.95-103
• /
• 2013

An underwater acoustic (UWA) communication in shallow water is strongly affected by the water surface and the seabed acoustical properties. Every reflected signal to receiver experiences a time-variant scattering in sea surface roughness and a grazing-angle-dependent reflection loss in bottom. Consequently, the performance of UWA communication systems is degraded, and high-speed digital communication is disrupted. If there is a dominant signal path such as a direct path, the received signal is modeled statistically as Rice fading but if not, it is modeled as Rayleigh fading. However, it has been known to be very difficult to reproduce the statistical estimation by real experimental evaluation in the sea. To give an insight for this scattering and grazing-angle-dependent bottom reflection loss effect in UWA communication, authors conduct experiments to quantify these effects. The image is transmitted using binary frequency shift keying (BFSK) modulation. The quality of the received image is shown to be affected by water surface scattering and grazing-angle-dependent bottom reflection loss. The analysis is based on the transmitter to receiver range and the receiver depth dependent image quality and bit error rate (BER). The results show that the received image quality is highly dependent on the transmitter-receiver range and receiver depth which characterizes the channel coherence bandwidth.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.22 no.5
• /
• pp.27-43
• /
• 2019

This study applied the LANDIS-II model to the forest vegetation of the study area in Yeongdong-gun, Korea to identify climate effects on ecosystems of forest vegetation. The main purpose of the study is to examine the long-term changes in forest aboveground biomass(AGB) under three different climate change scenarios; The baseline climate scenario is to maintain the current climate condition; the RCP 4.5 scenario is a stabilization scenario to employ of technologies and strategies for reducing greenhouse gas emissions; the RCP 8.5 scenario is increasing greenhouse gas emissions over time representative with 936ppm of $CO_2$ concentration by 2100. The vegetation survey and tree-ring analysis were conducted to work out the initial vegetation maps and data for operation of the LANDIS model. Six types of forest vegetation communities were found including Quercus mongolica - Pinus densiflora community, Quercus mongolica community, Pinus densiflora community, Quercus variabilis-Quercus acutissima community, Larix leptolepis afforestation and Pinus koraiensis afforestation. As for changes in total AGB under three climate change scenarios, it was found that RCP 4.5 scenario featured the highest rate of increase in AGB whereas RCP 8.5 scenario yielded the lowest rate of increase. These results suggest that moderately elevated temperatures and $CO_2$ concentrations helped the biomass flourish as photosynthesis and water use efficiency increased, but huge increase in temperature ($above+4.0^{\circ}C$) has resulted in the increased respiration with increasing temperature. Consequently, Species productivity(Biomass) of trees decrease as the temperature is elevated drastically. It has been confirmed that the dominant species in all scenarios was Quercus mongolica. Like the trends shown in the changes of total AGB, it revealed the biggest increase in the AGB of Quercus mongolica under the RCP 4.5 scenario. AGB of Quercus mongolica and Quercus variabilis decreased in the RCP 4.5 and RCP 8.5 scenarios after 2050 but have much higher growth rates of the AGB starting from 2050 under the baseline scenario. Under all scenarios, the AGB of coniferous species was eventually perished in 2100. In particular they were extinguished in early stages of the RCP 4.5 and RCP 8.5 scenarios. This is because of natural selection of communities by successions and the failure to adapt to climate change. The results of the study could be expected to be effectively utilized to predict changes of the forest ecosystems due to climate change and to be used as basic data for establishing strategies for adaptation climate changes and the management plans for forest vegetation restoration in ecological restoration fields.

• International Journal of Highway Engineering
• /
• v.1 no.1
• /
• pp.107-119
• /
• 1999

The joints in the jointed concrete pavement provide a control against transverse or longitudinal cracking at slab, which may be caused by temperature or moisture variation during or after hydration. Without control of cracking, random cracks cause more serious distresses and result in structural or functional failure of pavement system. However, joints nay cause distresses due to its inherent weakness in structural integrity. Thus, the evaluation at joint is very important. and the joint-related distresses should be evaluated reasonably for economic rehabilitation. The purpose of this paper was to develop an evaluation system at joints of jointed concrete pavement using finite element analysis program, ILLI-SLAB, and nondestructive testing device. FWD. To develop an evaluation system for JCP, a sensitivity analysis was performed using ILLI-SLAB program with a selected variables which might affect fairly to on the performance of transverse joints. The most significant variables were selected from precise analysis. An evaluation charts were made for jointed concrete pavement by adopting the field FWD data. It was concluded that the variables which most significantly affect to pavement deflections are the modulus of subgrade reaction(K) and the modulus of dowel/concrete interaction(G), and limiting criteria on the performance of joints at JCP are 300pci. 500,000 lb/in. respectively. Using these variables and FWD test, a charts of load transfer ratio versus surface deflection at joints were made in order to evaluate the performance of JCP. Practically, Chungbu highway was evaluated by these evaluation charts and FWD field data for jointed concrete pavement. For Chungbu highway, only one joint showed smaller value than limiting criterion of the modulus of dowel/concrete interaction(G). The rest joints showed larger values than limiting criteria of the modulus of subgrade reaction(K) and the modulus of dowel/concrete interaction(G).

• Journal of the Korean Vacuum Society
• /
• v.20 no.1
• /
• pp.42-49
• /
• 2011

We deposited $SiN_x$ thin films by using PECVD technique at $200^{\circ}C$ with various flow ratios of the $SiH_4/N_2$ gases. The photoluminescence measurements revealed that the maximum emission wavelength shifted to long wavelength as the ratio increased, however, positions of the several peak wavelengths, such as 1.9, 2.2, 2.4, and 3.1 eV, were independent on the ratio. Changes of the photoluminescence spectra were measured in the $N_{2}-$, $H_{2}-$, and $O_2$-annealed films. The luminescence intensities increased after the annealing process. In particular, the maximum emission wavelength shifted to short wavelength after $H_{2}-$ or $O_2$-annealing. But there were still several peaks on the spectra of all annealed films, several peak positions remained to be unchanged after the annealing. As for the light emission mechanism, we have considered the defect states of the Si- and N- dangling bonds in the $SiN_x$ energy gap, so that the energy transitions from/to the conduction/valence bands and the defect states in the gap were attributed to the light emission in the $SiN_x$ films. The experimental results point to the possibility of a Si-based light emission materials for flexible Si-based electro-optic devices.

• Korean Journal of Ecology and Environment
• /
• v.47 no.3
• /
• pp.160-166
• /
• 2014

This study was aimed at looking into the distribution status and age structure of Abies holophylla population in Sudo-Am temple forest. It was found that a total of 302 individuals of Abies holophylla existed which were more than 2m in height within the study area. Furthermore the population size is one of the largest in the southern region of Korea. The CBH of Abies holophylla ranged from 1.5 cm to 500.8 cm. Age structure of Abies holophylla looks like a gourd-shaped bottle. This means that they have an unstable structure status and do not survive very long. This status results from a variety of factors including, vegetation succession, anthropogenic activities, and global warming. The environmental characteristics of Abies holophylla population was $931{\pm}64.5m$ in mean altitude, $19.2{\pm}8.7^{\circ}$ in mean slope in the northeastern and southeastern area of the slope direction, and $1,324,323{\pm}174,459wh\;m^{-2}$ in average of direct normal irradiation. Among the site environmental factors, the significant ones which influence the potential habitat for Abies holophylla distribution were chosen using the MaxEnt model. According to the results of this study, altitude and slope were found as the important factors. The average value of environmental conditions by ROC analysis were altitude 903.2 m, slope $20.04^{\circ}$, irradiation $1,352.248wh\;m^{-2}$, and the southeastern aspect.