• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.2
• /
• pp.235-244
• /
• 2014

This paper describes the subarray channel configuration and calibration method for airborne AESA radar antenna. AESA radar demonstrator was designed and implemented for the digital beam-forming performance test of the 12 channel subarray structure. Magnitude and phase difference can be exist between the manufactured subarray channel. In this paper, calibration method for the subarray difference error was suggested. We measured digital monopulse slope in the subarray channel and verified the channel calibration effect. To verify the subarray channel operation, digital monopulse channel was compared with analog monopulse channel performance. AESA radar demonstrator was tested in the ground far field test range. Emulated single target was generated to test the detection and tracking performance of the demonstrator with the same waveform and search pattern. We verified that the detection and tracking performance of the 12 subarray digital monopulse channel was similar with the conventional analog monopulse channel. Also, ABF(Adaptive Beam-Forming) function for the sidelobe jammer was tested and effective operation was verified.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.11
• /
• pp.1119-1126
• /
• 2011

In conventional microchannel heat exchangers, only one kind of fluid (hot or cold) flows in each plate. The channels contain different kinds of fluid depending on the vertical position, but they have the same kind of fluid at all horizontal positions. Therefore, there is a slower heat transfer rate in the horizontal direction than in the vertical direction. We propose a microchannel heat exchanger in which hot and cold fluid flows alternately in each plate to improve the thermal performance. This novel channel array requires a special design for the inlet and outlet. The proposed channel array has a faster heat transfer rate than a conventional channel array. The thermal performance of the novel channel array increases with increasing Reynolds number and Prandtl number, but it decreases as the ratio of solid to fluid thermal conductivity increases.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.5
• /
• pp.110-115
• /
• 2001

In this paper, we propose a beamformer adequate for the nested away that is generally used for multiple frequency band signal processing. The nonisotropic beam pattern of channel in this array causes two problems: the bearing-estimate error of mainlobe and the difference between design and output in sidelobe level. By separating the time delay among channel signals and the time delay among sensor signals in channel, we can remove the effects of the nonisotropic beam pattern of channel in the beamformer output. Through this process, a method to correct simultaneously these problems is proposed.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.20 no.4
• /
• pp.77-86
• /
• 2016

A numerical analysis is performed to investigate the effect of a supply channel and jet hole arrangement on the heat flow characteristics of impingement jet. The jet holes in a supply channel are composed of a single or staggered array from the center of a leading edge channel. The software ICEMCFD is used to generate the structured grids for calculation domain and a CFD code CFX 15.0 to perform the simulation. The present solutions are validated by comparison with the experimental and numerical ones of others. A comparison of mass flow rates of impingement jets and Nusselt numbers on the impingement surface for the single or staggered arrays is made.

• Proceedings of the IEEK Conference
• /
• 2000.09a
• /
• pp.95-97
• /
• 2000

배열 안테나에서 안테나 소자의 개수의 증가는 안테나의 이득을 증가시킬 수 있으므로 열악한 채널 환경에서도 채널이 필요로 하는 링크 마진을 얻을 수 있다. 그러나, 기존 빔 형성기에서 사용되는 배열 안테나 기법은 많은 계산량과 소모 메모리량 때문에 배열 소자의 개수에 제한이 따르게 된다. 이러한 문제를 해결하기 위하여 본 논문에서는 배열 안테나의 구조에 따른 위상차이를 보상하여 적은 계산량과 메모리를 갖는 배열 위상 차이 보상을 이용한 평행 구조 빔 형성기를 제안한다 배열 위상 차이를 보상하는 기법으로 적은 계산량과 메모리로 개수가 많은 긴 배열 안테나에서 얻을 수 있는 분해능과 안테나 이득을 얻을 수 있다. 제안된 기법의 성능을 비교하기 위해 기존의 빔 형성기법으로delay-sum 빔 형성기와 공분산 행렬의 고유치 해석을 통한 고유벡터 기법의 빔 스펙트럼과 연산량을 비교하였다. 제안된 기법으로 빔 형성을 하면, 배열 안테나의 소자의 개수가 늘어나도 기존의 방법보다 최소 30%의 연산량으로 스펙트럼 상 비슷한 성능을 얻을 수 있다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.7
• /
• pp.720-728
• /
• 2011

In this paper, development of the monopulse secondary surveillance radar antenna which can be used for IFF system is presented. This antenna that is passive linear array is comprised of the row-feeder and several array-elements. The row-feeder provides sum, different and SLS(Sidelobe Supression) channels which are optimized the distribution of the power and phase ratio. The azimuthe sidelobe level of the sum channel beam pattern is -20 dBc or less. The SLS channel covers the sidelobe of the sum-chanel in the whole azimuth angle range. And the difference channel is used to perform the mono-pulse function, improves the detection accuracy in the azimuth direction. Meanwhile, the arrayelement makes shaped beam in the elevation angle, in order to eliminate the clutter and multipath effects from the ground. Performance of the antenna developed is verified by the measurement of S-parameters and far-field beam pattern, and satisfies all of the development specifications well.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.7
• /
• pp.89-93
• /
• 2001

In recent years Fiber optic hydrophone systems have been the focus of much attention in the sonar world. For sonar arrays, a fiber optic approach offers the major benefit of passive multiplexing of large numbers of hydrophones without underwater electronics. This paper describes recent development work covering array construction, opto-electronics development, hydrohpone design and sea trials. And the development of an interferometric mult-channel fiber optic hydrophone system which uses time division multiplexing capable of driving in excess of 32 channel is described. For this, a 12 channel time division multiplexing array has been constructed, and the performance of this system is demonstrated by sea trial.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2000.10a
• /
• pp.468-472
• /
• 2000

This paper discusses the development of a acoustic vector channel simulator for the performance analysis of a acoustic digital communication system. The channel simulator consists of transmission module, acoustic channel model, receiver, beamformer, and adaptive equalizer. QPSK source signal is generated by the parameters specified by a user and transmitted. The transmitted signal generate multipath signals which have a different delay, amplitude, and dopper Sequency. The multipath signals with the acoustic noises is the received signal. We can analysis the communication system performance according to the antenna structure, beamforming algorithm, and equalization algorithm.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.4
• /
• pp.861-868
• /
• 2000

This paper discusses the development of an acoustic vector channel simulator for the performance analysis of an acoustic digital communication system. The channel simulator consists of transmission module, acoustic channel model, receiver, beamformer, and adaptive equalizer. QPSK source signal is generated by the parameters specified by a user. The transmitted signal generates multipath signals which have a different delay, amplitude, and dopper frequency. The multipath singnals with the acoustic noises are the received signal. This paper presents the performance analysis of an acoustic digital communication system according to the antenna structure and the various baseband signal processing techniques.

• Journal of Sensor Science and Technology
• /
• v.7 no.5
• /
• pp.306-312
• /
• 1998

To develop the multi-channel fiber-optic sensor array system, two-channel TDM(Time Division Multiplexing) fiber-optic sensor array was constructed and characterized. The sensor array topology was Mach-Zehender ladder type and PMDI(Phase-Matched Differential Interferometer) technique was used to exploit the efficiency of the array signal processing. By using a synthetic heterodyne demodulation technique, outputs of the two channels were monitored simultaneously. The sensitivities of channel #1 and #2 were measured ${\sim}60{\mu}rad/\sqrt{Hz}$ and ${\sim}80{\mu}rad/\sqrt{Hz}$, respectively. Crosstalk of sensors in the array was found to be approximately -36dB. Based on the results, we could conclude that TDM Mach-Zehnder ladder type sensor array can be used to detect the acoustic signal with stability and efficiency of the sensor array.