• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.1
• /
• pp.141-150
• /
• 2011

In this paper, we propose a Cross-Layer Cooperative Routing(CLCR) architecture to support transmission efficiency in mobile wireless sensor networks. The main features and contributions of the proposed architecture and method are as follows. First, the clustering which uses the location information of nodes is utilized as infrastructure. Second, a cross-layer strategy which uses the technologies of network layer, MAC layer, physical layer together to support transmission efficiency and channel efficiency for cooperative-aided routing and transmission. Third, we consider realistic approach in the view points of the mobile ad-hoc wireless sensor networks while conventional methods just consider fixed sensor network environments. The performance evaluation of the proposed method is performed via simulation using OPNET and theoretical analysis. The results of performance evaluation of the proposed CLCR show improvement of transmission efficiency by the proposed CLCR.

• The KIPS Transactions:PartC
• /
• v.10C no.6
• /
• pp.809-814
• /
• 2003

The multicast transmitting the real-time data to groups may easily have many attacks from abnormal attacks because it has many links as compared to the unicast. The existing group key management architectures for preventing these problems are designed for protocols suitable for a large scale. Thus these architectures applied to a small scale routing protocols may have many overheads with key distribution and a constant core tree. Therefore this paper proposes a groups key management protocol for a secure multicast in PIM-SM multicast group communication. The proposed method divide multicast groups with RO(Rendezvous-Point), and subgroup key managers are established in each RP and can be transmitted groups keys between senders and receivers, so the security cannel is set up for secure data transfer, And this does not have needs of the data translation for group keys and the new key distribution for path change. As a result of this, the data transmission time can be reduced.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.10
• /
• pp.29-34
• /
• 2011

We present a network coding scheme which is designed for improving throughput in multi-hop wireless network with multi-radio multi-channel. The co-channel interference and unreliability of wireless transmissions cause the wireless network to reduce throughput. In wireless network, multi-radio multi-channel technology shows benefit to cut down channel interferences and contentions. And network coding can reduce the complexity of scheduling and improve throughput by increasing usage of links in wireless network. In this paper, we propose a method of channel assignment and transmission scheduling in intra-session network coding that efficiently improve throughput for multi-hop wireless network by using mathematical modeling and linear programming. Moreover, we evaluate the performance of the intra-session network coding scheme by using AMPL with CPLEX. The simulation results show that intra-session network coding can achieve better throughput than traditional routing.

• Journal of Korea Multimedia Society
• /
• v.12 no.11
• /
• pp.1593-1608
• /
• 2009

If a certain relay node in multi-hop wireless networks might become a malicious node that does not cooperate with other nodes or a selfish node, network throughput will be dramatically decreased. Most of existing ad hoc routing protocols assuming that the nodes will fully cooperate with other nodes do not resolve the problem of network performance degradation due to malicious and selfish nodes. This paper presents the CARE (Cooperative Ad hoc routing protocol based REputation) scheme incorporating the reputation management that can achieve a multi-hop wireless network with high throughput performance. The proposed scheme provides the horizontal cross-layer approach which can identify misbehaving malicious, selfish nodes dropped out of the hop-by-hop based packet processing in the network and then set up an optimal packet routing path that will detour misbehaving nodes. And the vertical cross-layer approach contained in the CARE scheme attempts to improve the quality of routing paths by exploiting the quality of link information received from the MAC layer. Besides, it provides high TCP throughput by exploiting the reputation values of nodes acquired from the network layer into the transport layer. A case study on experiments and simulations shows that the CARE scheme incorporating vertical and horizontal cross-layer approaches yields better performance in terms of the low rate of packet loss, fast average packet delivery time, and high TCP throughput between end-to-end nodes.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 2004.11a
• /
• pp.36-36
• /
• 2004

• Korean Journal of Optics and Photonics
• /
• v.18 no.1
• /
• pp.79-83
• /
• 2007

A reconfigurable photonic microwave (MW) channel selective filter was demonstrated incorporating a $1{\times}2$ switch based on two tunable polymeric resonators with different free spectral ranges. Each resonator, consisting of two cascaded rings with an electrode formed on one of them, plays a role as an on/off switch through the thermooptic effect. The optical signal carrying the MW signal is routed to either port of the switch and detected to show the filtered output at the frequency determined by the free spectral range of the corresponding resonator. When the channel centered at 10 GHz was chosen, the extinction ratio was ${\sim}30dB$, the bandwidth 1 GHz, and the electrical power consumption 4.1 mW. For the other channel located at 20 GHz, we have achieved the extinction ratio of ${\sim}30dB$, the bandwidth of 2 GHz, and the required power of 8.0 mW. Finally the crosstalk between the selected and blocked channels was higher than 24 dB.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.7
• /
• pp.45-51
• /
• 2009

We have presented a routing mechanism that selects a route by considering channel statuses in order to fast transfer delay-sensitive data in WSNs (Wireless Sensor Networks). The existing methods for real-time data transfer select a path whose latency is the shortest or the number of hops is the smallest. An algorithm to select a real-time transfer path based on link error rates according to the characteristic of wireless medium was also suggested. However, the propagation delay and retransmission timeout affected by link error rates are shorter than channel assessment time and backoff time. Therefore, the mechanism proposed in this paper estimated the time spent in using a clear channel and sending out a packet, which is based on channel backoff rates. A source node comes to select a route with the shortest end-to-end delay as a fast transfer path for real-time traffic, and sends data along the path chosen. We found that this proposed mechanism improves the speed of event-to-sink data transfer by performing experiments under different link error and channel backoff rates.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.7
• /
• pp.1427-1433
• /
• 2003

This paper presents the routing and wavelength and timeslot assignment problems for a circuit-switched time division multiplexed (TDM) wavelength-routed networks. In this paper, we propose an efficient distributed control protocol for establishing lightpath dynamically. The protocol uses backward reservation to reduce the chance of blocking. We use aggressive reservation method with usable multiple channels and select only one in multiple channel. We show through simulation that the proposed protocol improves the success rate in TDM-based lightpath establishment and the proposed aggressive reservation method improve blocking probability with appropriate reservation channel count.

• The KIPS Transactions:PartA
• /
• v.12A no.4 s.94
• /
• pp.297-304
• /
• 2005

This paper proposes DAMQWR and VCDAMQ architectures that enloit the full capabilities of adaptive routing. DAMQWR enables messages in congested channels to route through non-congested channels by using recruit registers while VCDAMQ dynamically assigns resources among virtual channels, resulting in better network traffic control. Through extensive simulations and analysis, this paper evaluates their effects on overall network cost and performance. These proposed queue architectures, VCDAMQ and DAMQWR are shown to appropriately support adaptive routing capability by dynamically and efficiently managing queue and network resources, increasing network performance. The results show that up to $20\%$ higher throughput can be obtained in comparison to traditional DAMQ designs.

• Proceedings of the Korean Information Science Society Conference
• /
• 2006.06d
• /
• pp.25-27
• /
• 2006

블루투스는 무선 홈 네트워킹을 구성하는 하나의 기술로 자리를 잡았지만, 기존의 홈 네트워킹을 구성하는 IRDA, 무선랜, Home RF, ZigBee 등에 비하여 블루투스 사용으로 인한 큰 이득이 없어 이용되지 않는 것이 현재 블루투스가 직면한 문제이다. 비슷한 통신반경을 지원하는 IRDA와 비교하면 가격과 전력소비에서 블루투스의 이점이 떨어지고, 다중 연결을 지원하는 장점에도 불구하고 10m 내의 전송 반경으로는(저 전력 사용 시) 집안을 전부 커버할 수 없기 때문에 무선랜에 비해 홈 네트워킹에서 이용성이 떨어지는 것이 사실이다. 하지만 이런 블루투스의 AD-HOC 라우팅을(1:1 혹은 1:다) 위한 블루투스 프로토콜 스택에 라우팅 프로토콜 스택을 추가함으로써 블루투스가 장착된 정보 가전기기는 주변으로부터 라우팅 정보를 수집하게 되고 라우팅 테이블을 구성할 수 있게 된다. 그러므로 전송 범위의 이상적인 설계에서 무선랜보다 넓어지게 되므로 홈 네트워킹에서 블루투스 사용의 단점이 보안됨은 물론 집안을 하나의 WEB처럼 구성할 수 있게 된다. 이에 다른 기술에 비한 저렴한 가격, 접속의 용이성, 저 전력 소비 둥과 같은 기존의 장점에 전송 거리의 단점이 보안된 블루투스 라우팅 프로토콜 기술은 IRDA, 무선랜보다 기술적 우위를 가짐으로써 홈 네트워킹에 적용이 많아지리라 예상할 수 있다. 더 나아가 블루투스 기술이 포함되어 있는 모바일 기기가 정점 늘어남에 따라 모바일 기기와의 연동에 의한 홈 네트워킹이 실생활에 적용되리라 예측되며, 집뿐만 아니라 어디에서나 다른 모바일 기기와 연결되어 네트워크를 이루는 유비쿼터스 네트워킹이 실현 될 수 있으리라 본다.-filtered CU)과는 비슷한 결과를 보였다. 결과적으로 제안된 방법은 전통적인 켑스트럴 평균 차감법에 기반하여 효과적인 채널 정규화가 가능하다는 것을 보였다.ttention since the operation of local autonomy in Korea. This trend focuses on ′visual landscape planning′, and it is expected to grow drastically in the near future. Therefore, it is recommended that we promote the more elaborate methodology of ′visual landscape planning′, which also includes the ecological and cultural aspects of the environment. 7월 시료에는 ethane, ethyl formate, trans-2-hexenal의 순서로 그 함량이 많았으며, hydrocarbon류가 전체성분의 30.42%를 차지하였다. 8월 시료는 benzyl alcohol, ethyl formate 및 trans-2-hexenal의 순서로 많이 함유되어 있었으며, ester류가 35.60%를 차지하였다. 또한 9월 시료에도 ester류가 32.92%를 차지하였으며 ethyl acetate, benzyl alcohol, ethane 및 trans-2-hexenal의 순서로 함량이 높았다.to isolate the major component of silkworm powder, which exerts blood glucose-lowering e