• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.17 no.1
• /
• pp.21-30
• /
• 2004

This study deals with free vibrations of laminated composite structures with a channel section using finite element method. In this paper, the mixed finite element method using Lagrangian and Hermite interpolation functions is adopted and a high-order plate theory is used to analyze laminated composite non-prismatic folded plates with a channel section more accurately for free vibration. The theory accounts for parabolic distribution of the transverse shear stress and requires no shear correction factors supposed in the first-order plate theory. An 32×32 matrix is assembled to transform the system element matrices from the local to global coordinates using a coordinate transformation matrix, in which an eighth drilling degree of freedom (DOF) per node is appended to the existing 7-DOF system. The results in this study are compared with those of available literatures for the conventional and first-order plate theory. Sample studies are carried out for various layup configurations and length-thickness ratio, and geometric shapes of plates. The significance of the high-order plate theory in analyzing complex composite structures with a channel section is enunciated in this paper.

• Journal of Broadcast Engineering
• /
• v.21 no.2
• /
• pp.169-179
• /
• 2016

Recently, MPEG-H has been standardizing for a multimedia coder in UHDTV (Ultra-High-Definition TV). Thus, the demand for not only channel-based audio contents but also object-based audio contents is more increasing, which results in developing a new technique of converting channel-based audio contents to object-based ones. In this paper, a non-uniform linear microphone array based source separation method is proposed for realizing such conversion. The proposed method first analyzes the arrival time differences of input audio sources to each of the microphones, and the spectral magnitudes of each sound source are estimated at the horizontal directions based on the analyzed time differences. In order to demonstrate the effectiveness of the proposed method, objective performance measures of the proposed method are compared with those of conventional methods such as an MVDR (Minimum Variance Distortionless Response) beamformer and an ICA (Independent Component Analysis) method. As a result, it is shown that the proposed separation method has better separation performance than the conventional separation methods.

• Journal of the Korean Society for Library and Information Science
• /
• v.36 no.4
• /
• pp.21-47
• /
• 2002

The present study, on the bass of a premise that reference lists are one of the social products, reflecting various social environments of their own society, was made as part of an attempt to explore the co-occurrence phenomenon of both Korean and Non-Korean Literatures occurred within the Korean references. 321 authors (articles) of 43 Korean journals on Social Sciences were surveyed on research channels and citation motivations and their 11358 references were analyzed. The findings are as follows : 1) The extent of the co-occurrence was that Non-Korean literatures were more 1.9 times (65.3%) cited than Korean ones and English (61.5%)-American (50.4%) predominancy was heavily found. 2) Research channel, worked as an indicator of the identity of researcher as well as the source of research ideas was most Non-Korean channel orientedness (55.8%). 3) Citation motivations were significantly depended on whether Korean or Non-Korean literatures and non-Korean literatures were cheifly cited to be conceptual motivations than other motivations. 4) Research channel among variables was worked as a main effect predicting major citation motivations on Non-Korean literatures. Finally, this study is very suggestive : 1) It might be a new approach and interpretation by adopting citation motivations to explore a process of knowledge producting of researchers 2) Partly, it proved empirically the relationship of knowledge producted by Korean researchers to Non-Korean knowledge through the analysis of citation motivations.

• Korean Journal of Optics and Photonics
• /
• v.31 no.6
• /
• pp.247-258
• /
• 2020

In this paper, based on a stochastic parallel gradient descent (SPGD) algorithm we study phase control of a coherent-beam-combining system under turbulent atmospheric conditions. Based on the statistical theory of atmospheric turbulence, we carry out the analysis of the phase and wavefront distortion of a laser beam propagating through a turbulent atmospheric medium. We also conduct numerical simulations of a coherent-beam-combining system with 7- and 19-channel laser beams distorted by atmospheric turbulence. Through numerical simulations, we characterize the phase-control characteristics and efficiency of the coherent-beam-combining system under various degrees of atmospheric turbulence. It is verified that the SPGD algorithm is capable of realizing 7-channel coherent beam combining with a beam-combining efficiency of more than 90%, even under the turbulent atmospheric conditions up to cn2 of 10-13 m-2/3. In the case of 19-channel coherent beam combining, it is shown that the same turbulent atmospheric conditions result in a drastic reduction of the beam-combining efficiency down to 60%, due to the elevated impact of the corresponding refractive-index inhomogeneity. In addition, by putting together the number of iterations of the SPGD algorithm required for phase locking under atmospheric turbulence and the time intervals of atmospheric phenomena, which typically are of the order of ㎲, it is estimated that hundreds of MHz to a few GHz of computing bandwidth of SPGD-based phase control may be required for a coherent-beam-combining system to confront such turbulent atmospheric conditions. We expect the results of this paper to be useful for quantitatively analyzing and predicting the effects of atmospheric turbulence on the SPGD-based phase-control performance of a coherent-beam-combining system.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.11
• /
• pp.15-22
• /
• 2008

The cdma2000 1xEV-DO system controls the data rates of mobile terminals based on a binary overload indicator from the base station and a simple probabilistic model. However, this control scheme has difficulty in predicting the future behavior of mobile terminals due to a probabilistic uncertainty and has no reliable means of suppressing the traffic overload, which may result in performance degradation of CDMA systems that have interference-limited capacity. This Paper proposes a new traffic control scheme that controls the data rates of mobile terminals effectively by predicting the future traffic load and adjusting the forward-link control channel. The proposed scheme is analyzed by modeling it as a multi-dimensional Markov process and compared with conventional schemes. The numerical results show that the maximum cell throughput of the proposed scheme is much higher than those of the conventional schemes.

• The Journal of the Korea Contents Association
• /
• v.12 no.4
• /
• pp.31-39
• /
• 2012

DVC(Distributed Video Coding) techniques have been attracting a lot of research works since these enable us to implement the light-weight video encoder and to provide good coding efficiency by introducing the feedback channel. However, the feedback channel causes the decoder to increase the decoding complexity and requires very high decoding latency because of numerous iterative decoding processes. So, in order to reduce the decoding delay and then to implement in a real-time environment, this paper proposes several parity bit estimation methods which are based on the temporal correlation, spatial correlation and spatio-temporal correlations between LDPCA frames on each bit plane in the consecutive video frames in pixel-domain Wyner-Ziv video coding scheme and then the performances of these methods are compared in fast DVC scheme. Through computer simulations, it is shown that the adaptive spatio-temporal correlation-based estimation method and the temporal correlation-based estimation method outperform others for the video frames with the highly active contents and the low active contents, respectively. By using these results, the proposed estimation schemes will be able to be effectively used in a variety of different applications.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.8
• /
• pp.1675-1685
• /
• 2012

DVC (Distributed Video Coding) technique plays an essential role in providing low-complexity video encoder. But, in order to achieve the better rate-distortion performances, most DVC systems need feedback channel for parity bit control. This causes the DVC-based system to have high decoding latency and becomes as one of the most critical problems to overcome for a real implementation. In order to overcome this problem and to accelerate the commercialization of the DVC applications, this paper analyzes an effect of LDPCA frame size for adaptive LDPCA frame-based parity bit request estimations. First, this paper presents the LDPCA segmentation method in pixel-domain and explains the temporal-based bit request estimation method and the spatial-based bit request estimation method using the statistical characteristics between adjacent LDPCA frames. Through computer simulations, it is shown that the better performance and fast decoding is observed specially when the LDPCA frame size is 3168 in QCIF resolution.

• Journal of IKEEE
• /
• v.17 no.4
• /
• pp.469-477
• /
• 2013

This paper enhances the speed of a pedestrian detection using an estimation of feature information based on integral image. Pedestrian model or input image should be resized to the size of various pedestrians. In case that the size of pedestrian model would be changed, pedestrian models with respect to the size of pedestrians should be required. Reducing the size of pedestrian model, however, deteriorates the quality of the model information. Since various features according to the size of pedestrian models should be extracted, repetitive feature extractions spend the most time in overall process of pedestrian detection. In order to enhance the processing time of feature extraction, this paper proposes the fast extraction of pedestrian features based on the estimate of integral image. The efficiency of the proposed method is evaluated by comparative experiments with the Channel Feature and Adaboost training using INRIA person dataset.

• Journal of Broadcast Engineering
• /
• v.16 no.1
• /
• pp.133-143
• /
• 2011

In this paper, a complexity-balancing algorithm is proposed for distributed video coding based on entropy coding. In order to reduce complexity of DVC-based decoders, the proposed method employs an entropy coder instead of channel coders and the complexity-balancing method is designed to improve RD performance with minimal computational complexity. The proposed method performs motion estimation in the decoder side and transmits the estimated motion vectors to the encoder. The proposed encoder can perform more accurate refinement using the transmitted motion vectors from the decoder. During the motion refinement, the optimal predicted motion vectors are decided by the received motion vector and the predicted motion vectors and complexity load of block is allocated by adjusting the search range based on the difference between the received motion vector and the predicted motion vectors. The computational complexity of the proposed encoder is decreased 11.9% compared to the H.264/AVC encoder and that of the proposed decoder are reduced 99% compared to the conventional DVC decoder.

• Journal of Broadcast Engineering
• /
• v.16 no.5
• /
• pp.738-749
• /
• 2011

In this paper, we study QoS(Quality of Service) control protocols and the effect using MAC/PHY parameters of client device in mobile network. We proposes the way of controling the bit-rate by estimating the channel condition of the client with measured MAC/PHY parameters which is sent from the client. With the proposed method, more accurate available bit-rate can be estimated compared to conventional protocol, RTCP(Real-time Transport Control Protocol). The accurate bit-rate estimation can decrease wasted bit-rate and transport delay. In the result of the advantages, the transported video quality can be enhanced. In this paper, we show the effects of enhancement using client's the field data measured in WiMAX.