• Journal of KSNVE
• /
• v.11 no.1
• /
• pp.26-28
• /
• 2001

최근의 회전 기계 시스템은 단위 중량 당 에너지 효율을 높이기 위하여 고속화 소형화(경량화) 추세이며 이에 따라 불안정성이 증대되는 경향이 있다. 이를 개선하기 위하여는 회전기 요소의 연구가 필수적인데 이는 결국 기계시스템의 내구성 및 안전과 경쟁력 향상에도 직결되는 중요한 사항이 된다. 여기에서는 고속회전기 요소 및 시스템 안정화 해석설계 기술과 관련. 한국과학기술연구원(KIST) 트라이볼로지 연구센터의 로터다이나믹스팀이 현재 보유하고 있거나 개발 중인기술들을 소개함으로써 향후 고속화를 통한 회전기계 시스템의 세계적 경쟁력 향상은 물론 새로운 관심사로 떠오르는 지능형 회전기기 시스템과 초소형 회전기기 시스템에 관련된 연구 개발을 소개하고자 한다.(중략)

• Proceedings of the Korean Information Science Society Conference
• /
• 2000.10c
• /
• pp.671-673
• /
• 2000

본 논문에서는 분산공유메모리 다중프로세서 시스템에서 하드웨어 구성요소와 실행환경이 시스템의 전체 성능에 미치는 영향을 시뮬레이션을 통하여 분석한다. PARSEC[1,2]을 이용하여 분산공유메모리 다중프로세서 시스템을 실제 실행환경에 근접하게 모델링하고 그 모델링된 시스템상에 2D FFT를 가상 실행하는 방식의 시뮬레이션 결과, 일반적으로 성능분석을 할 때 성능요소로 고려하지 않는 군소 하드웨어 요소들이 시스템 구성에 따라 시스템의 전체 성능에 상당한 영향을 미침을 밝힌다. 또한 반복순환 구문의 오버헤드, 코드최적화 등 실행조건에 따른 성능의 변화도 정량적으로 분석한다.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2014.05a
• /
• pp.72-73
• /
• 2014

Recently the concurrent construction method of framework and windows work has been applied for early beginning of exterior finishing works in tall building construction. However, the conventional method makes difficulties in auto-climbing of gang-form and climbing work of lift car since the removal of ACS(auto climbing system) should be preceded for operation of lift car up to the top floor. This study propose a concept model of integrated ACS and lift car system to resolve these problems and begin windows works early in tall building construction.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.20 no.12
• /
• pp.1229-1235
• /
• 2010

Anti-terrorism design for public buildings as well as military facilities is important to minimize the mass casualties from terrorist attacks. Also, well designed glazing and window systems can reduce the potential injury of human caused by scattering fragment of a glazing. In this paper, blast resistant design for glazing and window systems is investigated based on the U.S. Standard. The design procedures include minimum requirements for the design, standard practice for design evaluation of the glazing and standard test method for evaluation of the performance.

• Land and Housing Review
• /
• v.10 no.3
• /
• pp.1-7
• /
• 2019

Indoor particulate matter(PM) is a carcinogen and needs to be removed and managed. It is generally reduced and removed through ventilation and filtration. Owing to the recent occurrence of high-concentration fine dust and yellow dust in the atmosphere, however, it is difficult to expect the purification of indoor air through the simple introduction of the outside air. For residential buildings, in particular, they are highly dependent on natural ventilation but the lack of natural ventilation is worsening because concerns over the inflow of external pollutants are increasing. Therefore, this study designed and manufactured a window ventilation system that does not require a duct to improve the maintenance and management problems of general ventilation system, and constructed indoor PM concentration change data through performance evaluation.

• Proceedings of the SAREK Conference
• /
• 2008.11a
• /
• pp.557-560
• /
• 2008

Window system is an essential component for ventilation, lighting, and thermal environment in buildings. However, window system has the lowest insulation performance and may cause high energy consumptions, if it is not properly designed. Thus, performance of window systems play an important role in built environment. This study proposes a new window systems for balcony, which has double vents and analyses the thermal performance using an intergrated simulation method with Therm 6.1 and Widow 6.1. The result shows higher U-factor than conventional window systems. It is expected that the double vent window system can increase thermal performance and save energy in apartment houses.

• 한국태양에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.222-226
• /
• 2009

The parts of building which has the most influence on thermal load are skins, outer walls and windows. Among them, window is the worst weak point of building even if it has many advantage of solar radiation gain than other parts. The present time, many researches on various performance of window and many types of system-window are being made. This study evaluates thermal performance of tilt & sliding system window by simulation program Therm 5.2 and Window 5.2. After making a sample model improving it's thermal weak point, this study evaluates real thermal performance of system window. As a result, this study understands manufacture ability condition of domestic company and proposes a research plan of system window.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.95-95
• /
• 2012

우성 진공(크라이오 펌프), 제일 진공(터보 펌프)의 개발 시제품을 나노종합 팹센터(크라이오 펌프는 Sputter 장비, 터보 펌프는 Etcher 장비에 부착)에서 공정 신뢰성 Test 실시함.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1997.10a
• /
• pp.139-142
• /
• 1997

본 논문에서는 기존 FCM(Fuzzy C-Means) 타입 클러스터링 알고리즘의 선은 향상을 위한 설계 방법을 제시한다. 우선 클러스터의 응집성(compactness)과 분리성(separation)을 동시에 고려한 성능 지수를 정의하고, 이를 진화 프로그램을 통하여 최적화 한다. 또한 실험을 통하여 기존 연구들과의 비교 및 제안된 방법론의 유효성을 보인다.

• 대한방사선방어학회:학술대회논문집
• /
• 2009.04a
• /
• pp.210-211
• /
• 2009