• Proceedings of the KOR-BRONCHOESO Conference
• /
• 1978.06a
• /
• pp.9.2-9
• /
• 1978

Monaural and binaural hearing aid performance under quiet and noisy conditions were compared in regard to (1) the degree of hearing impairment, (2) the symmetry of pure tone audiogram, (3) the automatic gain control of the hearing aid. (4) hearing impairement with recruitment and, word discrimination ability. Performance using binaural hearing aids was consistently superior to that using monaural hearing aids. The results were as follows. 1. Speech detection thresholds were enhanced by a mean of 4.25dB when tested with danavox 747 PP stereo type hearing aid and by a mean of 4.12 dB when tested hearing aids connected seperately to the right and left ears. 2. Binaurally tested speech reception thresholds were superior to monaurally tested thresholds by a mean of 3.56dB when tested in quiet and by a mean of 5.56dB when tested in noise. 3. Binaurally tested word discrimination scores were also superior by a mean of 17.09% in quiet and by a mean 19.63% in noise. 4. Both SRT and word discrimination scores were performed best by subjects with moderately-severe impairement. The performance by one mildly impaired subject was the poorest of all performances. The levels of performance order were; moderately-severe loss, severe loss. moderate loss and mild loss. 5. The data obtained using AGC aids when compaired with that of linear amplification show that when AGC aids were worn in both ears. the results were very poor but when one AGC aid was worn in one ear and linear amplification in the other. the results were good. 6. The advantages of binaural hearing aids were obvious even in cases 1) with great diferences in hearing thresholds between right and left ears, 2) when the subject was unable to discriminate words without vision and. 3) when the subject had extreme recruitme t phenomenon.

• Science of Emotion and Sensibility
• /
• v.10 no.3
• /
• pp.383-391
• /
• 2007

We have developed and evaluated a smart clothing system for the measurement of body composition in real time. Two kinds of experimental clothes were developed in this study to investigate the effects of textile electrodes on the measurements. As long as the wearer maintained same posture, the magnitudes of impedance was measured identically even though he got into the clothing again. Moreover we found the clothing could measure the impedance of each body segment.

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.04a
• /
• pp.263-266
• /
• 2003

섬유제품과 기술의 스마트화에 따라 소재와 가공 및 프로세싱에서 새로운 개념과 복합적인 기능을 가진 섬유제품이 개발되고 있으나 이들 제품을 평가하는 기술이나 표준 또는 장비는 이에 부응하지 못하는 경우가 많다. 섬유제품의 주요 성능중의 하나인 착용감을 평가하는 기술은 레저ㆍ스포츠 웨어의 개발이 활발하고 수요가 급증하는데 비하여 이들 성능을 제대로 평가하는 기술은 확립되어 있지않은 상태이다. (중략)

• Journal of the Korea Convergence Society
• /
• v.12 no.11
• /
• pp.221-228
• /
• 2021

This study was conducted to improve the convenience of design of mobile VR devices use in a way binds smart phones. Research on traditional mobile VR devices is insufficient. So the first survey was conducted on users 100 to understand the current status and status of mobile VR devices. As a result, it was found that the satisfaction with the convenience of use was significantly lowered, and countermeasures were needed. Then, a second survey of 30 Heavy Users was conducted to find out specific usability and problems of mobile VR devices. Through this, problems, ease of use, and other opinions of mobile VR devices were found. The survey results were analyzed through the Descriptive Statistics Act, and it was found that improvement was urgent due to low satisfaction with wearing and network. In-depth interviews were conducted with the same respondents. As with the problems derived first, problems such as wearing satisfaction, excessive head weight for long-term use, and lack of content could be found. Based on the previous studies, the focus group interview consisting of 6 experts derived the ease of use evaluation element. It consists of elements that can satisfy the convenience of use of mobile VR devices for creation, wearing satisfaction, network, morphology, learning, and spatiality, and has a total of 26. Using this evaluation elements, it is intended to provide better ease of use to users who will use the mobile VR device.

• Journal of the Korea Society of Computer and Information
• /
• v.25 no.7
• /
• pp.125-134
• /
• 2020

In this study, Q methodology was applied to investigate the subjective evaluation of department jumpers and characteristics of each type of recognition for college students. As a result of analyzing, they were classified into three types. Type 1 was recognized that the department jumper plays a role of giving a sense of belonging to the department and promoting the department. In addition, it was analyzed that wearing a department jumper would be cautious, but the activities were comfortable and people around me gave good evaluations and thought it had the effect of enhancing my confidence. In the case of type 2, the department jumper was satisfied because it was an easy-to-work and non-fashionable design, and was always worn when going to university. Type 3 was a type that gives a sense of belonging when wearing the department jumper, and that it was good for the department jumper to follow the fashion. It is thought that a department jumper with a good fit should be developed by reflecting the physical characteristics, showing the image or symbolism, so that the department jumper of college students can function as a uniform.

• Science of Emotion and Sensibility
• /
• v.16 no.3
• /
• pp.397-408
• /
• 2013

According to increase of concerning in health and entry of aging society, sensor-based smart clothing has developed various type and applications. Sensor-based smart clothing should be designed with considering of the interaction between a human body-device-clothing, such as accuracy of signal, wearability, suitability and the configuration of the sensor and so on. In this respect, these characteristics distinguish sensor-based smart clothing process from clothing process and Sensor-based smart clothing process is expected to be needing requirements Specification for development purpose and interoperability assessment based on requirements engineering. In this study, to assess efficiency of process based on requirement engineering, the sensor-based smart clothing process was deducted in two types by analysis of empirical performance. Presented two process were empirically evaluated through qualitative and quantitative evaluation. As a result, design process II based on requiments engineering were confirmed more effective process than processI.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.3
• /
• pp.597-602
• /
• 2021

Even in the era of the 4th industrial revolution, the prevention of industrial accidents is still an important issue in industrial sites. In solving the problem of industrial safety, a product can be difficult to market if there is a lack of standard or method for a reliable performance evaluation. The purpose of this study was to develop and evaluate a test method for a wearable airbag product for protecting the body from falls that was newly developed to respond to fall accidents in industrial sites. As a research method, reliable evaluation standards were developed and applied through four stages of the evaluation and development process (Step 1: Product review, Step 2: Data research, Step 3: Expert meeting, Step 4: Drawing evaluation standard). In addition, the impact force was evaluated according to the developed evaluation standard. The fall impact force obtained through the evaluation showed a reduction effect of approximately 96% compared to the existing impact force. Therefore, the fall impact force was reduced significantly when the airbag was applied. This will enable new convergence products to be launched on the market and produce an environment where industrial workers can work safely.

• Journal of the Korean Society of Radiology
• /
• v.8 no.2
• /
• pp.51-56
• /
• 2014

We analyzed how insole affects the dynamic stability and the balance while a body moves or stops. Specially we've sorted out variations of individual balance ability while we make a longitudinal arch stop artificially as a usual situation(just standing and putting one's weight). We found ten men and girls each with suitable feet for our experimentation as the subject of investigation and made individual insole for them by measuring medial longitudinal arch. Then we compared before and after movement of the power point of application and a pattern of COP using the Tetrax balance equipment. We found out it is better for balance ability when we wear insoles. It turned out to be helpful for increasing balance ability of body to use insole which supports medial longitudinal arch of longitudinal arch well.

• Journal of Korean Ophthalmic Optics Society
• /
• v.21 no.1
• /
• pp.23-34
• /
• 2016

Purpose: In the present study, the effect of circle contact lenses wear on contrast sensitivity and glare sensitivity in a refractive surgery group was investigated. Methods: The contrast sensitivity and glare sensitivity were evaluated using by CGT-1000 for a non-refractive surgery group as control group(40 eyes) and a refractive surgery group(30 eyes) applied plano circle contact lenses, and pupil size was also measured. The correlation between contrast/glare sensitivity and the pupil size was analyzed. Results: In the refractive surgery group, contrast sensitivity in the range of high spatial frequency decreased with wearing circle contact lenses, and amount of decrease for the refractive surgery group was larger than for the control group. The correlation between pupil size and the change of contrast sensitivity was decreased by wearing circle contact lenses, and the correlation was lower in the refractive surgery group than the control group. Furthermore, the wear of circle contact lenses affected on glare sensitivity. In analyzing the change of glare sensitivity by pupil size, the glare was larger in the refractive surgery group than control group. Circle contact lenses in refractive surgery group were not fitted on the center of cornea. Conclusions: In the present study, it is suggested that the sufficient understanding and consideration about the decrease of contrast sensitivity and the increase of glare by wearing circle contact lenses after the refractive surgery is necessary.

• Science of Emotion and Sensibility
• /
• v.26 no.2
• /
• pp.129-140
• /
• 2023

Following ISO 20471, in this study, first, two sets of safety clothes and safety vests were made by designing and attaching animal and bird patterns preferred by children to retroreflective films and black fabrics on those fluorescent fabrics and retroreflective materials prescribed by international standards. Second, by mounting a smart photonic device on the safety clothing so that the body can be recognized from a distance even without an ambient light source at night, children can emit three types of light depending on the situation with just one-touch of the button. From a result of comparison with visibility a day and night by dressing a mannequin in the made smart safety clothing, the difference in visibility was evident at night, it was confirmed that we can see the figure of a person even at a distance of approximately 70 m. Therefore, it is expected to contribute to the prevention of traffic and other accidents on the road, as the drivers driving at night or in bad weather can recognize a person from a distance. Third, in case of the energy is exhausted and cannot maintain the stability of the light-emitting function of the optical faber, we can use energy harvesting device, and the light-emitting time will be extended. As a result it comes up to emit light stably for a long time. And this prove that smart photonic safety clothing can also be used for night workers. Therefore, optical fiber safety clothing is expected to be highly wearable not only in real life but also in dark industrial sites due to stable charging by applying the energy harvesting provided by solar cells.