• Title/Summary/Keyword: 착시효과

Search Result 45, Processing Time 0.029 seconds

An Experimental Study for Letter Size Perception (문자의 크기지각에 대한 실험연구)

  • Kim, Hyeon-Jeong;Paik, Jun-Kyung
    • Archives of design research
    • /
    • v.19 no.5 s.67
    • /
    • pp.181-190
    • /
    • 2006
  • This study was designed to investigate how the size perception of letters is influenced by its relation to the ground, visual angle, physical size, letter space and cognitive direction. As a stimulus, a word in the Numeral and Hangul respectively were used in Experiments I and II. Fifty four different configurations consisting of two grounds, three visual angles and nine physical sizes were used as test patterns in Experiment I, and one hundred and eight different configurations consisting of two ground, three directions, two letter spaces and nine physical sizes were used in Experiment II. Subjects were asked to make magnitude estimates for perceived size of test patterns in both Experiments I and II. The results imply that the ground and visual angle affected the perceived size of the Numeral as a focal figure. We found that in Experiment I, the perceived size of the focal letter was clearly underestimated when the rate of physical size was larger than the real size which was a hundred(as the size of standard stimulus), and it was overestimated when the rate of physical size was smaller than a hundred. It was found that the effect of Delboeuf illusion influenced the perceived size of letter. The result of Experiment II shows that the ground, physical size, letter space and the cognitive direction affected the perceived size of Hangul as a focal figure. These findings suggest that size illusion of letters is caused by the size relationship (contrast or assimilation) between a letter perceived as figure and its ground.

  • PDF

The properties and effects of the electrodeposited CdTe compound film on the porous silicon (다공질규소에 전착된 CdTe 화합물 박막의 특성과 효과)

  • 김영유;이춘우;류지욱;홍사용;박대규;육근철
    • Journal of the Korean Crystal Growth and Crystal Technology
    • /
    • v.9 no.1
    • /
    • pp.89-93
    • /
    • 1999
  • The properties and effects of the electrodeposited CdTe compound film on the porous silicon. To find ways to achieve good mechanical contact on the nanostructure porous silicon layer while keeping the interface transparent, we tried to electrodeposit a CdTe compound film on the porous silicon surface. The CdTe compound film was fabricated with -2.3V vs. Ag/AgCl potential difference in the electrolyte solution containing 1M of $CdSO_4$and 1 mM of $TeO_4$. X-ray diffraction results confirmed the existence of CdTe compound film on the porous silicon surface. Auger depth profile showed that Cd and Te were uniformly distributed up to a 80 nm distance from the surface. The photoluminescence of the sample with a CdTe compound film was weaker in intensity than that without the film and the maximum wavelength was shifted to the higher energy. These results indicate that the contacting CdTe compound film was infiltrated to the nanostructure of porous silicon.

  • PDF

The Study on the Visual illusions and the Image of the Clothing by the Computer Simulation through the combination of the collars and the sleeves (Computer Simulation을 이용한 의복의 착시효과와 이미지 연구 Collar와 Sleeve의 조합을 중심으로-)

  • Choi, Jung;Lee, Kyoung-Hee
    • Journal of the Korean Society of Clothing and Textiles
    • /
    • v.20 no.5
    • /
    • pp.915-929
    • /
    • 1996
  • The purpose of this study is to investigate the visual illusions and image of the combinated collars and sleeves which are combinated by the computer simulation. The detail object of this study as follows; 1) to know the visual illusions of the clothing as the collar and sleeves are combinated 2) to constract the clothing image using sementic differential scales 3) to know the differet image of the clothing as the collars and sleeves are combinted 4) to know the interaction effect of the collars and sleeves of the clothing The detail method of this study is as follows; In the first experiment, there are two groups; the first 8 groups are the combination of the same collar and the different sleeves. The second 8 groups are the combination of the same sleeve and the different collars. The second experiment has done for the 32 clothings which are the combination of the 8 collars and 4 sleeves. For the 14 clothing the image has tested by 13 semantic differential bi- polar scale. The subjects were 50 female students majoring in clothing and textile. The data analyzed by Kendall cofficient of concodance, Factor analysis, Anova and scheffe's test. Briefly the image of the clothing is much influenced by the varing of the collar than that of the sleeve. Thus, we also can conclude that the recognition of the clothing are much more dependent on the collar than sleeve.

  • PDF

Study on the Scanimation Expression Using Color Scheme (색상 배색을 이용한 Scanimation 표현방법 연구)

  • Lee, Yu-Seop;Chung, Jean-Hun
    • Journal of Digital Convergence
    • /
    • v.14 no.12
    • /
    • pp.451-456
    • /
    • 2016
  • Scanimation is utilized in various fields due to its simple and easy basic principle, whereas mostly it is expressed in gray scale, and the cases of expressing with color is rare. This research classified scanimation into form change of the images with no connectivity, continuous motion of the images with connectivity, and optical illusion with continuity along with visualization effect based on the advanced research and utilization case, and conducted a comparative analysis of scanimation per type applied with color scheme by color difference based on PCCS(Practical Color Co-ordinate System) system. Based on this research, the researcher intended to suggest various direction and expressive method of scanimation using color, expecting the research result could be a valuable reference for the researches utilizing scanimation, henceforth.

A Study on Fashion Design Using Geometric Pattern (기하학적 패턴을 활용한 패션디자인 연구)

  • 김신우;금기숙
    • Journal of the Korean Society of Costume
    • /
    • v.52 no.1
    • /
    • pp.53-67
    • /
    • 2002
  • 자연을 분석함으로써, 얻어진 기하학적 패턴은 이미 자연의 질서를 포함하고 있는 논리적이고 합리적인 기본형이기 때문에 간결하며 시각적으로 명쾌감을 준다. 이러한 기하학적 패턴은 복식 디자인에 있어서 20 세기 이후 여러 디자이너의 작품을 통해 재구성되어 현대적 이미지를 나타내는 중요한 모티브가 되고 있으며, 다양한 기법과 재료로 형성화하여 도입되고 있다. 이에 본 연구는 복식의 문양, 실루엣, 디테일에 사용되고 있는 기하학적 패턴을 연구함으로써 기하학적 패턴의 새로운 조형가치를 고찰하였다. 먼저 기하학의 용어 정의를 하였고 기하학적 패턴의 유형과 표현 기법을 분석하고 정리하여 현대 패션에 나타난 기하학적 패턴의 조형미와 그것을 바탕으로 패션 이미지를 추론해 보았다. 현대 패션에 나타난 기하학 패턴을 분석해 보면 유형으로는 첫째, 기하하적 문양으로 복식디자인에 있어서 주로 평면적인 형태로 많이 나타나지만, 크기가 다르고 동일한 기하학적 패턴을 조합시킴으로서 평면적인 형태에 공간감을 부여하기도 하며, 같은 기하학적 패턴의 표면이라도 배치구조에 의해 직선 혹은 사선으로 지각되므로 전혀 다른 이미지를 주었다. 또한 현대 패션에 나타난 기하학적 패턴이 종류는 세로 스트라이프, 가로 스트라이프, 격자 문양, 원, 사선 스트라이프, 마름모, 사각형, 삼각형 등의 순서로 많이 나타났다. 둘째, 색채는 단색의 복식에 강한 대비가 이루어지는 색상으로 표현되어 역동감과 유연한 운동감을 나타났다. 셋째, 기하학적 실루엣으로 단순한 라인의 형태를 나타내거나 입체적이고 부조적인 형태로 구성되어 전체적인 실루엣으로 사용되어 강한 조형감각을 보여주는데 원형을 이용한 실루엣이 가장 많았으며 사각형을 이용한 실루엣, 삼각형을 이용한 실루엣 순서로 나타났다. 넷째, 기하학적인 디테일로 복식의 어느 한 부분에 장식적으로 사용되거나 입체적 형태로 부출 되어 부조적인 느낌을 주는데 소매에 가장 많이 나타났으며 앞여밈, 칼라, 밑단, 주머니 순서로 장식되었다. 다섯째, 현대 패션에 표현된 기하학적 패턴의 표현기법으로는 프린팅, 퀼팅, piece기법, 패치워크, 엮기, 꼴라쥬, 아플리케 순서로 많이 나타났다. 위의 분석을 토대로 기하학 패턴을 활용한 디자인에 내재된 조형의지는 다음과 같이 정리되었다. 첫째, 기하학적 패턴이 지닌 단순성과 경직성을 완화하기 위하여 여러 가지 패브릭을 조합시켜 입체적인 표면효과로 시각적인 착시효과를 극대화하였다. 둘째, 표현기법은 입체파적 표현주의의 특성의 하나로 복시에 사용되는 소재의 왜곡으로 설명할 수 있으며, 새롭고 실험적인 소재의 도입으로 인해 의외성과 부조화를 유발시키는 통시에 유희직인 일면도 지니는 일종의 그로테스크를 나타냈다. 이상에서 정립된 조형의지를 바탕으로 현대 패션에 나타란 기하학 패턴은 절제된 단순함과 명확성으로 단순미가 유추되었고 강한 색상대비로 인한 시각적 집중효과로 주목성을 가지며 재현이 가능하므로 반복성이 유추되었다. 그리고 표준영역이 없는 창의적 표현으로 풍부한 독창성을 보여주고 있다. 또한 내재된 패션 이미지를 분석해 보면 정확함과 차가움의 의미를 지닌 이지적 이미지와 우주의 질서를 반영하는 상징적 이미지, 복잡한 자연으로부터 간결한 형태로의 경향성이 이루어낸 인공적 이미지를 느낄 수 있었으며, 미래적 이미지와 전통적 이미지의 상반된 개념의 이미지를 같이 내포하고 있음을 추론할 수 있었다. 이와 같이 현대 패션에 표현된 기하학적 패턴은 복식을 조형예술 분야로 확실히 인식시키고 발전시키는 데 중요한 촉매제 역할을 담당하고 있으며 또한 많은 디자이너들에게 창조적 욕구를 불러일으키고 영감을 주는데 중요한 모티브를 제공하고 있다.

블라인드 장착에 따른 실내 공기 순환 연구

  • Nam, Do-U;Hwang, Jae-Min
    • Proceeding of EDISON Challenge
    • /
    • 2016.03a
    • /
    • pp.625-627
    • /
    • 2016
  • 본 논문은 EDISON CFD의 전처리기, eMEGA를 이용하여 격자를 생성하고, 2차원 정렬 격자 기반 비압축성 해석자를 이용하여 유동해석을 진행한 뒤 후처리기, eDAVA를 통해 유동선을 그려 블라인드 장착에 따른 실내 공기 순환에 대한 연구 내용을 담고 있다. 본 연구는 시중에 판매중인 사생활 보호용 블라인드를 포함, 여러 블라인드의 장착 여부에 따라 실내 내부 공기 순환의 양상을 확인하고 실제로 블라인드 장착 시 실내환기에 어떤 영향을 주는지 유동 선을 통해 확인해 보았다. 블라인드 미장착시, 실내 전체적으로 공기가 고루 순환되는 모습을 보였으며, 블라인드 장착 시 대체로 블라인드 형태에 따라 유동이 이동하는 것을 볼 수 있었다. 본 연구는 사생활 보호와 환기 효율성의 관점에서의 소비자 선택권에 영향을 미치는 효과를 가져 올 것으로 보인다.

  • PDF

Comparison of Slim Appearance for 2D Image and 3D Virtual Clothing Images Based on Stripe Arrangement (스트라이프 조건에 따른 2차원 이미지와 3차원 가상착의 이미지의 착용효과 비교)

  • Park, Soyoung;Lee, Yejin
    • Journal of the Korean Society of Clothing and Textiles
    • /
    • v.46 no.2
    • /
    • pp.321-330
    • /
    • 2022
  • This study analyzed the difference between 2D image and 3D virtual clothing images based on stripe arrangement to obtain fundamental data for slim appearance. First, the slimming effect according to the three types of stripe ratio was examined. Subsequently, the slimming effects of seven types of one-piece dress designs according to the stripe location were analyzed. Subjective ranking was evaluated. The width items and radius of curvature were measured for the image's respective parts. Consequently, in 2D image and 3D virtual clothing images, the one with the narrowest stripe ratio was evaluated as the slimmest; however, the conditions for the slimming effect were different. In the seven one-piece dress designs, a difference was apparent in the ranking of the 2D image and 3D virtual clothing images. In the 3D virtual clothing image, arranging the stripes on the entire garment proved inefficient. The stripes were curved according to the curvature of the human body, creating an optical illusion that differed from that of the 2D image.

Digital technique in diagnosis and restoration of maxillary anterior implant: a case report (디지털 기법을 활용한 상악 전치부의 진단 및 수복 증례)

  • Haemin, Bang;Woohyung, Jang;Chan, Park;Kwi-Dug, Yun;Hyun-Pil, Lim;Sangwon, Park
    • Journal of Dental Rehabilitation and Applied Science
    • /
    • v.38 no.4
    • /
    • pp.249-256
    • /
    • 2022
  • The implant prosthesis of anterior maxilla requires careful consideration in planning. In order to satisfy both esthetic and functional needs of a patient, fusion of intra-oral scan in Cone-beam computed tomography (CBCT) and facial scan can be considered. Bony structures and soft tissues captured in CBCT and occlusal surfaces of intra oral scan were incorporated into personal characteristics from facial scan. The patient had insufficient buccal bone on maxillary anterior area. The maxillary implants could not be placed on the most ideal position. However, the "top down" approach completed by computer-generated arranging of teeth in implant planning and surgery with surgical guide resulted in esthetically and functionally satisfying result regardless of the limitation. Careful diagnosis with digital technique and the usage of surgical guide resulted in successful surgery and esthetic restoration. The temporary fixed prostheses were designed, restored and evaluated. The patient was not satisfied with the first design of temporary prosthesis, which showed uneven space distribution between teeth due to the position of maxillary implant. The design was modified by changing proximal emergence contours and line angle to alter the perceived since of incisors. The patient was satisfied with the new design of provisional restoration. A digital occlusion analyzer (Arcus Digma II, KaVo, Leutkirch, Germany) was used to measure inherent condylar guidance and anterior guidance of a patient to provide a definitive prosthesis.

A Study on Evaluability Assessment of the Performance Evaluation for Public Organization Focusing on Case of KEPCO (공공기관 경영평가의 평가성 검토: 한전 사례를 중심으로)

  • Yoonseuk Woo
    • Knowledge Management Research
    • /
    • v.24 no.3
    • /
    • pp.17-34
    • /
    • 2023
  • Recently, national concern for record breaking level of deficit operation of KEPCO grows bigger in Korea. With this regard, many stakeholders believe KEPCO should be responsible for this result although it is not clear whether KEPCO is only to blame who is in such position where full cost pricing is impossible and entrepreneurial efficiency is not guaranteed. Particularly, less concern is given to Performance Evaluation for Public Organization(PEPO) which did not give prior warning against major deficit of KEPCO or help to improve its capacity to deal with the problem, and thus prevented KEPCO from acknowledging its managerial weakness by crediting KEPCO with successive grade B during the period of previous government. Based on such viewpoint, this study analyzes reports of PEPO for 5 years in terms of evaluability assessment and suggests proper direction for better PEPO in the future. From this analysis, it was found that firstly, relevant suggestion was not made to prevent or improve defict problem; secondly, comments are increasing every year without consistency; thirdly, comments related to long-term investment are only recently found; fourthly, suggestions are based on political orientation rather than evidence or expertise. This study is expected to contribute to evidence-based evaluation and knowledge management since it tackles evaluation reports themselves for the first time.

Time Series Modelling of Air Quality in Korea: Long Range Dependence or Changes in Mean? (한국의 미세먼지 시계열 분석: 장기종속 시계열 혹은 비정상 평균변화모형?)

  • Baek, Changryong
    • The Korean Journal of Applied Statistics
    • /
    • v.26 no.6
    • /
    • pp.987-998
    • /
    • 2013
  • This paper considers the statistical characteristics on the air quality (PM10) of Korea collected hourly in 2011. PM10 in Korea exhibits very strong correlations even for higher lags, namely, long range dependence. It is power-law tailed in marginal distribution, and generalized Pareto distribution successfully captures the thicker tail than log-normal distribution. However, slowly decaying autocorrelations may confuse practitioners since a non-stationary model (such as changes in mean) can produce spurious long term correlations for finite samples. We conduct a statistical testing procedure to distinguish two models and argue that the high persistency can be explained by non-stationary changes in mean model rather than long range dependent time series models.