• Proceedings of the Korean Society of Crop Science Conference
• /
• 1995.05a
• /
• pp.16-17
• /
• 1995

• Journal of the korean academy of Pediatric Dentistry
• /
• v.44 no.1
• /
• pp.1-10
• /
• 2017

The present study aimed to evaluate the validity of resin infiltration in improving color stability after tooth whitening. Enamel samples were extracted from 40 healthy bovine upper incisors, and primary staining and whitening were performed. After that, specimens were randomly divided into 3 groups : resin infiltration group (n = 15, RI group), resin adhesive group (n = 15, RA group), and control group (n = 10). Secondary staining was performed on all samples. Coloration was assessed 5 times as follows: initial color, immediately after staining, after whitening, after resin application, and after secondary staining. Color was measured using a spectrophotometer and recorded by using the CIE $L^*a^*b^*$ color space. The color changes after primary staining for the RI, RA, and control groups were $12.16{\pm}3.50$, $12.16{\pm}3.38$, and $15.81{\pm}6.39$, whereas those after secondary staining were $15.21{\pm}7.19$, $15.93{\pm}4.31$, and $26.62{\pm}17.89$. Color changes after secondary staining showed a significant difference between the RI and control groups. In the within-group comparison between primary and secondary staining, there was no significant difference found in the RI group only (p = 0.26). The results suggest that Color stability after tooth whitening can be improved using resin infiltration.

• Proceedings of the Korean Information Science Society Conference
• /
• 1999.10b
• /
• pp.42-44
• /
• 1999

이전 연구의 무작위 또는 순차 시간배정으로 인해 발생했던중복 배경을 없애고, 보다 효율적인 프로그램의 구현을 위해 시간 배정에 앞서 같은 시간에 올 수 있는 과목들을 그룹화 한다. 본 논문은 그래프 착색 알고리즘과 시간표 작성 알고리즘의 관련성을 보이고, 같은 색으로 착색 가능한 시간들을 묶어 그룹화 함으로써 같은 시간대에 여러 과목을 배정하는 방법을 제안한다.

• Korean Journal of Organic Agriculture
• /
• v.10 no.3
• /
• pp.57-66
• /
• 2002

The experiment described in this paper focused on determining the effects of high-temperature(20$^{\circ}$) treatment of Satsuma mandarins, prior to their storage, on their color development and quality. High-temperature treatment promoted fruit skin color during the storage, decreased the weight loss regardless of their color at the time of their harvest and reduced the decay occurrence until the middle of March, but there was no difference between treatments after the end of March. There was a tendency of higher soluble solid and acid levels in the fruit when high-temperature treatment was applied but this difference was not significant.

• Horticultural Science & Technology
• /
• v.30 no.3
• /
• pp.256-260
• /
• 2012

This study was carried out to improve the fruit color through ABA treatment and to determine the optimum harvest time for producing high quality fruits in 'Hongisul' grapes. Spraying of $1000 mg{\cdot}L^{-1}$ exogenous ABA at early verasion (70 days after full bloom, DAFB) brought increase of endogenous ABA and soluble solid contents and enhanced fruit coloration. So, it was possible to harvest ABA treated fruits from 85 days after full bloom (15 days after treatment) by accelerated anthocyanin content which increased continuously until 110 DAFB. An increase of soluble solid and decrease of total acidity appeared steadily with the onset of berry ripening. After 100 DAFB, soluble solid content and total acidity did not change significantly, but the berry firmness was suddenly decreased. Consequently, it was suggested that ABA treated fruits need to be harvested at about 100 DAFB because of their short period of marketing by over ripening. On the contrary, harvesting of untreated fruit was totally impossible at 85 DAFB because of their poor berry coloration. But it was possible to harvest them at 100 DAFB based on the soluble solid/acidity ratio, whereas the berry coloration was progressed poorly. On the other hand, the fruits harvested at 110 DAFB showed acceptable berry coloration but their berry firmness was dropped significantly coincide with overripening. Therefore, it was needed to develop an altered production system for improving coloration at around 100 DAFB in 'Hongisul' grapes.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2017.05a
• /
• pp.131-131
• /
• 2017

알루미늄은 내식성, 내마모성과 같은 물리적, 화학적 성질이 우수하지 못하여 이를 향상시키기 위해서 양극산화법이 산업적으로 널리 사용되고 있다. 알루미늄 양극산화법을 적용하면 강도, 내마모성 및 내식성이 향상될 뿐만 아니라 알루미늄 표면에 규칙적으로 배열된 30nm~100nm 크기의 pore에 염료를 흡착시켜 다양한 색상의 외관을 가지는 양극산화피막을 형성시킬 수 있다. Pore간의 간격은 수십nm~수백nm 정도이며, pore의 크기와 간격 및 깊이는 양극산화조건(양극산화 전압, 전해액의 종류와 농도 및 온도)에 의해 크게 변화된다. 또한 염료의 농도와 착색 시간에 따라서 양극산화 피막의 색조가 변화되는 것으로 알려져 있다. 따라서 본 연구에서는 양극산화피막의 색조에 미치는 전해조건의 영향을 조사하고, 분광측색계를 사용하여 산화피막의 색조를 정량적으로 분석하고 또한 산화피막의 pore에 흡착된 염료를 정량분석하기 위해서 UV-visible을 사용하여 분석하였다. Al5052 합금을 이용하여 에칭, 양극산화, 착색처리, 봉공(sealing)처리를 실시하였다. $55^{\circ}C$ 100g/L NaOH 용액에서 에칭을, $25^{\circ}C$ 10 vol.% $HNO_3$ 용액에서 디스머트를 실시한 다음, $25^{\circ}C$ 10 vol.% $H_2(SO_4)$ 용액에서 15V의 정전압으로 양극산화를 실시하였다. 이후, $55^{\circ}C$ 5~8g/L의 오렌지, 블랙 착색염료(일본 OKUNO 사(社)의 TAC-LH(301), TAC-BLH(411))를 사용하여 착색처리를, $85^{\circ}C$ 초산니켈 수용액에서 봉공처리를 실시하였다. 착색조건으로는 양극산화 시간(5분, 10분, 15분, 20분), 착색 시간(15초, 1분, 2분, 5분) 및 착색 농도(오렌지 -2.5g/L, 5g/L, 7.5g/L, 블랙 - 4g/L, 8g/L, 12g/L)를 변화시켰으며, 산화피막의 색조를 정량 분석하기 위해 분광측색계를 사용하였고 흡착된 염료의 농도를 정량 분석하기 위해서 $55^{\circ}C$, 1M NaOH에 재용해하여 UV-visible로 흡광도를 측정하였다. 양극산화피막의 색조는 양극산화 시간이 길어질수록, 착색시간이 길어질수록, 착색농도가 진할수록 산화피막에 흡착되는 염료의 양이 증가하며 색조가 더 선명해지고 진해지는 것을 확인하였다. 이를 분광측색계로 분석하였을 때 각 전해조건하에서 경향성을 나타내었다. 또한 흡광도 측정을 통해 계산한 염료의 양과 전해조건의 상관관계를 조사하였다. 양극산화 시간이 길어지면 산화피막의 두께가 증가하여 염료가 흡착될 수 있는 표면적이 넓어지고, 착색 시간이 길어지면 동일한 산화피막에 더 많은 염료가 흡착이 된다. 그리고 착색 농도가 진할수록 동일면적, 동일시간 하에서 더 많은 염료가 흡착되어 결과적으로 전해조건이 강해질수록 산화피막의 색조가 진해지는 것으로 판단된다.

• Journal of dental hygiene science
• /
• v.12 no.5
• /
• pp.477-485
• /
• 2012

This study evaluate the influence of food staining food and bleaching on the color (CIELAB) and reflectivity of two-way (anterior & posterior) composite resin and flowable composite resin. There were 6 immersion media: kimchi, red pepper paste, blueberry, tea, curry and distilled water. A total of 36 specimens ($11{\times}11{\times}2$ mm) were prepared and immersed in each immersion media for 8 days at $37^{\circ}C$. Their color and reflectivity measured with the spectrophotometer at baseline and every 24 hours. Data from the color change and reflectivity were collected and subjected to statistical analysis by ANOVA, ANCOVA and RM-ANOVA. Curry showed the highest influence on color change and blueberry on brightness (p<0.001) on both resins. Bleaching after polishing made color change more than polishing or bleaching independently on two-way (anterior & posterior) composite resin, but not on flowable composite resin. It was suggested cleaning the mouth after taking curry and blueberry be needed to maintain the original color of composite resin.

• Textile Coloration and Finishing
• /
• v.7 no.2
• /
• pp.86-91
• /
• 1995

탄소 섬유란 높은 강도, 높은 탄성률 등을 갖고 잇는 소재로서, 복합 재료에 이용되고 있다. 최근에는 스포츠 용품에 대해서도 장식성이 필요한 시대가 되어서 탄소 섬유도 착색할 필요가 있게 되었다. 일반 의류용 섬유를 염색할 때 염료가 섬유를 구성하는 분자에 단분자상으로 흡착한다. 섬유란 사실상 투명하기 때문에 빛이 섬유 내부에 흡착된 염료까지 도달하고, 염료는 빛을 흡수하여 발색한다. 그러나 탄소 섬유의 색은 검고, 빛이 섬유 내부까지 미치지 못하기 때문에 만약 탄소 섬유에 염료를 흡착시키더라도 염료는 발색하지 않게 된다. 한편 검은 탄소 섬유를 표백해서 백색으로 만들기 위해 예를 들어 불소와 반응시키면 검은 탄소 섬유가 백색이 되기는 하지만, 이 불소와 반응한 탄소섬유는 대단히 부서지기 쉬워서, 섬유로 사용할 수 없게 된다. 따라서 탄소섬유는 검은 색 그대로 착색시키지 않으면 안된다. 즉 탄소 섬유는 섬유의 표면에 도료와 같은 색소 층을 붙여서 착색하게 된다.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 1988.07a
• /
• pp.58-59
• /
• 1988

• Applied Chemistry for Engineering
• /
• v.17 no.4
• /
• pp.426-431
• /
• 2006

Acryl and vinyl sulfone functionalized blue and orange azo dyes were prepared by the coupling reaction of 6-bromo-2-cyano-4-nitroaniline and 2,5-dimethoxy-4-(vinylsulfonyl)benzenamine with 3-acrylamido-(N,N-diethylamino)benzene and 3-methyl-(N,N-diethylamino)benzene, respectively, for the coloring of poly(methyl methacrylate) (PMMA). Allyl functionalized dye was also prepared by reacting vinyl sulfone-containing dye with allylamine. Three types of dyeing method were used: the copolymerization of reactive dye with methyl methacrylate (MMA) and dyeing by polymerization of MMA in the presence of polymeric dye and dye 2 without reactive function. The color fastness for the three PMMAs were evaluated by comparing the solubility of dye under various conditions.