• Korean Journal of Materials Research
• /
• v.9 no.3
• /
• pp.251-256
• /
• 1999

대전력을 사용하는 제강공장의 L/F설비에서 발생되는 강자계를 효율적으로 차폐하기 위하여 L/F주위의 자기장 분포를 유한해석법을 이용한 사용해석도구인 ANSYS 5.3 3차원 자기장해석기를 통해 해석하고 그 결과를 평판형태의 차폐체에 적용시키고자 하였다. 분석결과, L1 및 L2가 각각 2.7 및 2.9m 이려 높이가 3.5m인 2중차폐체(1차측 차폐: 1mmt의 전기강판, 2차측차폐: 1mmt의 Fe-Ni alloy sheet)를 설치하는 거싱 최적의 처폐방안으로 도출되었다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.12
• /
• pp.67-76
• /
• 2020

The purpose of this study was to derive the directionality of technology development of high-power electromagnetic pulse (EMP) shielding concrete and standardization of a shielding performance evaluation method. Because the EMP shielding mechanism of concrete has not been identified clearly, and the verification method for EMP shielding performance has not been standardized, it is difficult to compare the research results between researchers. The development direction of EMP shielding concrete was derived from a consideration of the electromagnetic wave loss mechanism of metal. The standardization direction for verifying the EMP shielding performance of concrete was derived from a consideration of the electrical properties of concrete and the shielding performance evaluation methods of previous studies. As a result, the development of electrically conductive concrete is required, and test methods classified by the electromagnetic wave loss mechanism should be applied. For quality verification, the development of EMP shielding concrete will be feasible and its performance can be evaluated if a test method referencing the generalized shielding evaluation method (MIL-STD, etc.) is applied.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05c
• /
• pp.547-552
• /
• 1996

확률론적 방법을 이용한 MCNP4A 전산코드를 이용하여 두꺼운 차폐체내에서 효과적인 분산감소기법에 대하여 가장 단순화된 모델을 이용하여 고찰하여 보았다. 등방점선원과 이를 둘러싼 반경 50cm의 납차폐체를 계산을 위한 모빌로 사용하여 차폐체 내부 각 영역과 외부에서의 평균선속을 계산하였다. 분산감소기법으로는 구역분할법과 Exponential transform을 적용하여 각 구역에서의 분산의 변화를 비교하였다. 계산결과 두꺼운 차폐체문제에서는 exponential transform이 가장 효과적인 분산감소기법으로 나타났고 이때 구역분할법을 통하여서는 상대오차의 크기를 더욱 줄일 수 있었다.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.6 no.4
• /
• pp.11-19
• /
• 1995

In this paper, the Finite Difference Time Domain (FDTD) method is used to analyse the characteristics of the coaxial line transmission coefficent, shielding effectiveness, and compared to results of the moment method. The excitation mode of the Gaussian pulse is assumed to be a TEM-mode instead of the TE or TM-mode and in order to eliminate the reflected wave with in short length of the line. Calculated value of shielding effectiveness of the coaxial line by the FDTD are in good agreement with the results of the moment method.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2013.05a
• /
• pp.58-58
• /
• 2013

폴리에스테르 필름상에 무전해 Cu 도금 및 무전해 Ni-P 도금층을 형성하는 방법으로 박형 전자파 차폐 필름의 제조에 대하여 연구 하였다. 무전해 도금의 전처리 방법으로 기존의 Pd 촉매를 사용하는 대신에, 증착법에 의한 Sn 피막의 형성으로 전자파 차폐 특성 및 유연성이 우수한 박형 전자파 차폐 필름의 형성이 가능하게 되었다.

• Proceedings of the Korean Fiber Society Conference
• /
• 1998.10a
• /
• pp.497-500
• /
• 1998

고분자 물질에 처리하는 전자기파 차폐처리 방법으로서 무전해 도금법은 차폐 처리하고자 하는 매트릭스 표면에 균일한 금속 필름을 형성할 수 있으며 차폐효과가 크고 시료의 형태가 복잡하여도 응용 가능한 가공방법으로 알려져 있다. [1,2] 무전해 구리 도금의 경우, 도금용액 중에 포함되는 환원제의 산화반응에 의해 유리되는 전자에 의하여 금속이온을 환원함으로써 금속 피막을 석출시키며 이때 일어나는 반응 메카니즘은 다음과 같다. [3] (중략)

• Nuclear Engineering and Technology
• /
• v.2 no.3
• /
• pp.149-161
• /
• 1970

This paper describes a detailed investigational performance on the gamma radiation shield effect of heavy concretes that were manufactured by the use of mineral ores produced domestically and which may be possibly applied for the biological shield design. Ten different kinds of mineral ores were collected for use as the aggregates, physical test and chemical analysis for them were carried out to select the aggregate with a better property. Through the experimental investigation on the shielding effect of various concretes with different combination of concrete components such as water-cement and fine-coarse aggregate ratios, it was possible to derive some criteria for the best condition being capable of obtaining the concretes with high density and good uniformity. Data on the shielding-effectiveness of the different concretes were obtained by performing collimated beam experiment using 60Co gamma-ray. Analyzing the shielding-efficiency, shielding-concrete specific gravity and biological shield cost, the optimum condition of yielding the best economic shielding design, with low cost and good spatial distribution to some extent was determined.

• Journal of Korean Society for Geospatial Information Science
• /
• v.19 no.1
• /
• pp.29-36
• /
• 2011

The main purpose of this paper is to make a map showing canopy cover by using airborne Lidar data based on region. Watershed algorithm was applied to elevation data to conduct segmentation, and then canopy cover was estimated through the regions extracted. In the process of transforming point data to raster, we solved the problems about overestimation and underestimation by using frequency method. Also, canopy cover map could be produced with various scales by differing level of segmentation and it provides more accurate and precise information than ones of ordinary public forest map.

• Applied Chemistry for Engineering
• /
• v.21 no.5
• /
• pp.527-531
• /
• 2010

The optimized sheet for EMI shielding was prepared by metal power with Fe series. Then various metal powders were deposited on the sheet by PVD method. Moreover, the PVdF nanofiber membrane was used to compare the characteristic of EMI shielding efficiency of various metal powders. The electrical property was measured by the 4-point probe method. The result from EDS confirmed that the metal powder existed on the sheet. EMI shielding efficiency was analysed by EMI shielding measurement apparatus. The lowest electrical resistance, $641.95{\Omega}{wcdot}cm$, was obtained with $1000\;{\AA}$ deposition of Cu on the sheet. It was revealed that the EMI shielding efficiency increased with increase of the metal deposition thickness. The sheet deposited by Cu with $1000\;{\AA}$ showed the highest EMI shielding efficiency, 32.5 dB.

• Journal of the Korean Vacuum Society
• /
• v.3 no.4
• /
• pp.457-465
• /
• 1994

유도결합 플라즈마의 해석식으로 양극성 확산, 정상상태를 가정한 확산식, 열평형식과 변위전류 를 무시한 맥스웰 식을 사용하였다. 해석기법으로는 유한 차분법과 적분법을 축대칭 2차원(R, Z)모델에 적용하였다. 유도 결합 플라즈마장치의 RF 전력, 압력, 석영창 두께, 차폐부 높이에 따른 전자온도, 전자 밀도, 등가 정항 등가 인덕턴스 효율 결합계수 K, Q-factor의 변화를 구하였다. 특히 등가정항은 진공챔 버, 차폐부 및 코일의 손실저항을 고려하여 구하였다.