• Journal of the Korea Convergence Society
• /
• v.12 no.4
• /
• pp.87-94
• /
• 2021

While the shielding substances of radiation shields in medical institutions are beginning to be replaced by environmentally friendly materials, radiation protection according to the shielding properties of environmentally friendly substances is becoming an important factor rather than the existing lead shielding properties. Tungsten and barium sulfate are representative shielding materials similar to lead, and are made in sheets or fiber form with eco-friendly materials. Ytterbium is an impermeable material used as a fluorine compound in the dental radiation field. This study aims to evaluate the shielding performance in the x-ray shielding area by comparing the shielding properties of ytterbium by energy band and that of existing eco-friendly materials. When three types of shielding sheets were fabricated and tested under the same process conditions, the shielding performance of the medical radiation area was about 5 % difference from tungsten. Furthermore, shielding performance was superior to barium sulfate. In the cross-sectional structure of the shielding sheet, there was a disadvantage that the arrangement of particles was not uniform. Ytterbium oxide showed sufficient potential as a medical radiation shielding material, and it is thought that it can improve the shielding performance by controlling the particle arrangement structure and particle size.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.259-259
• /
• 2021

하상을 구성하는 사립자들이 흐름에 의해 움직이기 시작하는 상태를 한계운동이라 하며, 한계운동이 시작될 때의 흐름조건을 한계조건이라 한다. 흐름에 부유되어 이동하는 부유사의 농도분포를 정확하게 산정하기 위해서는 하상재료의 침식율을 정확하게 산정하는 것이 필요하다. 특히 하상재료에 다양한 크기의 하상재료가 혼합되어 있을 때에는 차폐효과(Hiding-Exposure Effect)에 대한 고려가 필요하다. 여기서 차폐효과란, 동일한 크기의 사립자들로 구성된 균질 하상에 비해 비균질 하상에서 굵은 사립자가 흐름에 더 많이 노출되어 한계소류력이 감소하고, 잔 사립자의 한계소류력이 굵은 사립자로 인해 증가하는 현상을 의미한다. 하상토의 차폐효과는 Shields (1936)에서 제안된 무차원 한계소류력을 각 사립자의 크기별로 산정 한 후 보정계수를 곱해 고려해주는 것이 일반적이다. 이에 본 연구에서는 하상재료의 차폐효과가 부유사의 연직방향 농도분포에 미치는 영향을 살펴보았다. 연구를 수행하기 위해 하상토의 입도분포를 바탕으로 차폐효과를 고려하고 연직방향으로의 유사농도를 계산하는 유사이동모형을 개발하였다. 수치모형의 검증은 실험실 실험자료와의 비교를 통해 수행되었다. 수치모의 결과로부터 차폐효과를 고려하지 않는 경우에는 하상에서의 침식율이 과다하게 산정되는 것으로 나타났으며, 불균질한 하상재료로 구성된 하천에서 부유사의 연직방향 유사농도를 정확하게 계산하기 위해서는 차폐효과에 대한 고려가 필요하다는 결론이 도출되었다.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.4 no.3
• /
• pp.84-94
• /
• 1993

When a telecommunications line is encountered with neighboring electric lines, induced currents are produced in the circuit formed by those lines and earth. The induced currents sometimes impose intolerable noise problems on the telecommunications lines. In this study, screening factor indication the level of screening effect is defined and calculated several cases together with numerical results.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.839-842
• /
• 2009

통신선에 장애를 유발할 수 있는 전자유도 대책을 위해서 국가 기술기준에 의한 유도전압 한계치가 정해져 있고, 현장 유도 대책 상 이 제한치를 초과할 때에 필요한 것이므로 정부 고시의 기술 근거에 의해 유도전압을 계산하여 이에 대한 조치를 시행하고 있다. 전자유도 현상에 있어서 피유도원인 통신선간의 커플링 관계에 있어서 중간 차폐를 줄 수 있는 성분에 대한 계수치를 적용할 수 있다. 이러한 차폐성을 줄 수 있는 시설과 관련하여 여러 가지 기유도원 또는 피유도원 시설 구조상의 요소들에 대한 차폐치가 주어져 있다. 그러나 지중 매설물에 대한 차폐효과에 대하여는 별도로 제시되지는 못하고 있다. 이와 관련 지중 매설물 중 광역상수도관에 의한 차폐성을 확인하기 위한 현장 측정을 통하여 비교 연구하였다. 유도원과 병행하여 광역상수도관이 매설된 지역에서 광역상수도관이 병행하는 부분과 일정 정도의 이격되어 병행하는 부분의 경계점에서 양단에 발생하는 유도 전압을 동시 비교 측정함으로써 그 차폐효과에 대한 현장 데이터를 확보하였다. 현장의 여러 조건변수들의 종속성을 정규화하고 광역상수도관의 독립적 변수에 의한 차폐성을 분석하여 제시한다.

• Journal of the Korean Solar Energy Society
• /
• v.30 no.5
• /
• pp.38-43
• /
• 2010

Enhancement of exterior's insulation performance like wall or window etc. is general way for building's energy efficient and thermal performance. But exterior's opening plan is important for minimizing the energy consumption and heat loss. In this paper, energy saving rate will be analyzed and compared considering the window area's rate and window's SC(Shading Coefficient) in a apartment with Building Energy Efficiency Rating System's evaluation tool. In the process of evaluation, energy saving rate is measured at each stage of the window area's rate from 20% to 60% every 10% term and the shading coefficient value from 1.0 to 0.6. As a result of this research, energy saving evaluation could not be measured exactly with existing evaluation tool. Accord this research, Building Energy Rating System's evaluation range is needed to be broaden for exact evaluation of energy saving rate.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.25 no.3
• /
• pp.42-55
• /
• 2021

In this study, the effect of nozzle performance according to the selection of the center line equation. Three of S-type nozzles and three of double S-type nozzles were designed using the curve equation and design parameters, and the nozzle shielding performance was evaluated using the shielding ratio definition. In order to analyze the internal flow of the nozzle, the characteristics of the velocity distribution and pressure distribution were studied, and the nozzle performance was evaluated through the total thrust ratio(f) and the nozzle insulation efficiency coefficient(η). On the other hand, the centerline with a sharply change in curvature at the entrance has a low nozzle performance and a high shielding rate. The double S-type nozzle is excellent nozzle performance and shielding rate by using a smooth centerline at the first curvature.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.4 no.3
• /
• pp.269-275
• /
• 2016

In this study, the mechanical properties and the neutron shielding rate of concrete with the borosilicate glass and the amorphous boron steel fiber were investigated. The measures of this investigation includes air contents, slump loss, compressive strength, static modulus of elasticity, compressive toughness, flexural strength, flexure toughness and neutron shielding rate. As a result, the neutron shielding rate of the concrete with borosilicate glasses increased even though the compressive strength and flexural strength decreased in comparison with that of plain concrete. Also, the mechanical toughness and the neutron shielding rate of the concrete with amorphous boron steel fiber increased in comparison with that of plain concrete.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.7
• /
• pp.86-91
• /
• 2016

To solve the problem of the excessive error caused by using a single value for the shielding effect of the neutral line of an electric power distribution line in the calculation of the voltage it induces in a telecommunication line, the general expression that was previously developed to reflect the mechanism of voltage induction by a distribution line with multiple grounds is employed in this paper to represent the relationship between the leakage current rates at each ground pole. In this way, the formula for calculating the shielding effect of the neutral line can be factorized against the unbalanced current flowing in the neutral line, which is the root current of induction. This shielding coefficient of the neutral line is not constant, but can vary when a range of induced voltages is generated in the whole power distribution line. The calculation method developed herein reduces the error rate to one tenth of that of the existing calculation result in the case of overestimation and increases it by 14% in the case of underestimation.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.14 no.4
• /
• pp.228-236
• /
• 1995

In this paper the method to evaluate shielding deficiency by gamma scanning test was presented and verified theoretically by Monte Carlo code which is one of the best effective method for radiation shielding calculation. The cylindrical shielding model was selected to evaluate shielding deficiency by gamma scanning test. First, the reference shielding according to the design requirement of cask was fabricated specially and reference values were measured with Co-60 source and scintillation detector. As a result with which calculated the reference values, it is shown that maximum deficiency thickness for lead of true cylindrical shielding model was 12mm. To verify this, thickness of lead was calculated by MCNP code and maximum deficiency thickness was 11.6mm. The experimental result obtained by the use of reference shielding was in good agreement with the theoretical result within 4.1%. So, this method can be applied to inspect the shielding ability for great shielding or cask which the radioactive material is used. To perform measurement more exactly, the further work on the development of measuring equipment to display the results on the screen will be required.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.2
• /
• pp.59-65
• /
• 2019

The EMI shielding effectiveness of shielding layers thickness was analyzed when the low conductivity shielding layers was placed in the near field of the noise source. A spiral antenna with broadband characteristics was used as the noise source, and graphite was selected as the low conductivity shielding material. Two spiral antennas were constructed to analyze the transmission coefficient between two antennas, and the distances between the transmitting and receiving antennas were 5 cm and 10 cm. The thickness of the shielding layers was changed from 1 um to 200 um. The frequency was changed from 100 MHz to 6 GHz to obtain a maximum SE(Shielding Effectiveness) of 70 dB. In this simulation, electronic shielding was used due to the nature of graphite, which is a shielding film material. Based on these results, we will study how to improve the shielding performance by implementing magnetic shielding in the future.