• Proceedings of the Korea Society of Poultry Science Conference
• /
• 2003.11a
• /
• pp.109-110
• /
• 2003

본 시험은 스테비아 부산물의 사료적 가치를 구명하기 위하여 산란계 사료에 첨가하여 산란계의 생산성, 난 품질, 계란의 지방산에 미치는 영향을 고찰하였다. 공시계는 78주령 하이라인 360수로 강제환우후 5％ 산란시기에 시행하여 총 20주 동안 사양시험을 시행하였다. 스테비아 부산물을 산란계 사료에 0, 2, 4, 8 ％를 첨가하여 동일한 에너지(2,800 kcal/kg)와 단백질(16 ％) 수준으로 급여하였으며, 처리구당 5반복, 반복당 18수씩 총 360수를 공시하였다. 시험기간 20주 동안, 총 산란율, 난중, 산란량, 사료요구율은 스테비아 부산물 급여구와 대조구 사이에 유의적인 차이는 없었다. 스테비아 부산물의 급여가 계란의 난 품질에 미치는 영향에서 난각강도, 난각두께, 난백고 및 Haugh Unit는 대조구와 차이가 없었지만, 난황색도는 스테비아 부산물의 급여수준이 증가할수록 높은 수치를 보여 스테비아 4 ％와 8 ％ 급여구는 대조구에 비하여 유의적으로 증가하였다. 계란의 당 전이도 시험에서는 스테비아 부산물을 급여하여 생산된 계란과 대조구 사이에 차이가 없었다. 계란의 지방산 함량은 스테비아 부산물 2 ％와 4 % 급여구가 포화지방산은 감소하였고, 단가 불포화지방산은 유의적으로 증가하였다. 이러한 결과 산란계 사료에서 스테비아 부산물은 원료사료로서 8 ％까지 가능하였다.

• Journal of Korean Society of Steel Construction
• /
• v.17 no.1 s.74
• /
• pp.33-43
• /
• 2005

This paper presents the test results and evaluations for the energy dissipation capacity and compressive performance of light-weight hybrid panels. A total of 26 full-scale specimens of light-weight hybrid panels were tested. The parameters include the presence of light-weight foamed mortar, the specific gravity of light-weight foamed mortar (0.6, 0.8, 1.0, 1.2), the finishing materials (light-weight foamed mortar, OSB [Oriented Strand Board], gypsum board), the shape of bracing (x, ~), and the size of panels (1P-900 mm 2,400 mm, 2P-1,800 mm 2,400 mm). The results of the cyclic tests are somewhat different from those of monotonic tests, due to the different specific gravity of light-weight foamed mortar. It was found from the compressive tests that the ultimate strength and initial stiffness are increased by means of light-weight foamed mortar (2~2.5 times in ultimate strength and 2~3 times in initial stiffness).

• Restorative Dentistry and Endodontics
• /
• v.35 no.4
• /
• pp.246-256
• /
• 2010

The purpose of this study was to evaluate a rotational stability of endodontic electronic motors by comparing the changes of rotational speed, depending on the number of usages and with/without static load. Twelve new endodontic electronic motors were used in this study. Non contact type digital tachometer was used for measuring the rotational speed of handpiece. True RMS Multimeter was used for measuring the voltages and the electric currents. All measurements were recorded every 10 seconds during 10 minutes and repeated 9 times. Five repetition was done per each electronic motor. To statistical analysis, student t-test, repeated measures and Scheffe's post-hoc tests were performed. In the same motor group, there was no significant difference in all measurements. In all groups, there was no significant difference in the amount of rotational speed changes depending on the number of usages and with/without static load. In the limitation of this study, the results showed that all kinds of endodontic electronic motors in this study had an established rotational stability. Therefore they could be safely used in root canal treatment with a reliable maintenance of rotational speed, regardless of the number of usages and with/without load.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.10
• /
• pp.67-74
• /
• 2007

Turbo code, a kind of channel coding technique, has ben used in the field of digital mobile communication system if the number of iterations is increased in the several channel environments, my further iteration results in very little improvement, and requires much delay and computation in proportion to the number of iterations. In this paper, it proposes an efficient stopping rules for the iteration process in turbo decoding. By using absolute mean values for the LLR difference values between the first and second decoder in the present decoding process, the proposed algorithm can largely reduce the average number of iterations without BER performance degradation in all SNR regions. As a result of simulation, the average number of iterations of proposed algorithm is reduced by about $18.25%{\sim}20.58%$ compared to SDR algerian in the lower SNR region, and is reduced by about $22.96%{\sim}28.74%$ compared to method using variance values of extrinsic information in the upper SNR region.

• Journal of Korea Society of Industrial Information Systems
• /
• v.9 no.1
• /
• pp.24-35
• /
• 2004

According to the results of this study, we found through preliminary research that most of the workers studied suffered from some sort of musculoskeletal injury, but did not obtain hospital treatment, which shows that although their work was the source of injury, they did not realize the significance of their injury. In addition, there were some subjects that did not even know what musculoskeletal injuries were and in order to solve such problems, companies need to educate their workers about musculoskeletal injuries and show the significance of the injuries. Also, there was a difference in rates of musculoskeletal injuries in different occupations, with higher rates of injury in esthetics, driving and packaging positions. This calls for the use of automated machinery and alteration of the working environment to make it more ergonomic according to the recommended improvement plan, and continuous effort and support on the part of the company in order to reduce the risk of musculoskeletal injuries.

• Polymer(Korea)
• /
• v.36 no.1
• /
• pp.88-92
• /
• 2012

Long-term performance of polymer under constant sustained load has been the main research focus, which created a need for the accelerated test method providing proper lifetime assessment. Cycling fatigue loading is one of the accelerated test method and has been of great interest. Microstructure change of high density polyethylene under cyclic fatigue loading and creep was examined utilizing a tensile device specially designed for creep and fatigue test and also can be attachable to the X-ray diffractometer. In this way, the crystal morphology change of polyethylene under creep and cyclic fatigue load was successfully monitored and compared. Despite the marked differences in macroscopic deformation between the creep and cyclic fatigue tests, crystal morphology such as crystallinity, crystal size, and $d$-spacing was as nearly identical between the two test cases. Specimens pre-deformed to different strains, i.e., before yield point (BYP), at yield point (YP) and after yield point (AYP), however, showed markedly different changes in crystal morphology, especially between AYP and the other two specimens.

• Journal of Convergence for Information Technology
• /
• v.9 no.11
• /
• pp.241-246
• /
• 2019

The purpose of this study was to examine the effects of repetitive oral health education on oral health knowledge, attitudes and behaviors of elementary school students. A final analysis of 111 untested individuals was made. The oral health knowledge and oral health behavior scores according to the presence or absence of oral health education showed a higher level than the school that did not perform oral health education for 3 years (p <0.01). Repeated and continuous oral health education of elementary school students has a great influence on oral health knowledge and behavioral change, so if the dental hygienists can stay and manage oral health care, the effect will be increased.

• Nuclear Medicine and Molecular Imaging
• /
• v.43 no.1
• /
• pp.72-78
• /
• 2009

Purpose: Bone mineral density (BMD) measurements need to be precise enough to be capable of detecting small changes in bone mass of rats. Using a regular dual-energy X-ray absorptiometry (DXA), we measured many BMD of various skeletal sites in rats to examine precision of DXA in relation to the repositioning on the bones of rats. Materials and Methods: Using DXA and small animal software, scans were performed 4 times in all 12 male rats without repositioning (Group 1a). Another four scans for 6 of 12 rats were done with repositioning between scans (Group 2). Customized regions of interest (ROIs), encapsulate the right hind limb, L1-4, skull and pelvic bones were drawn at each measurement. The precision of the measurements was evaluated by measuring the coefficient of variation (CV) of four measurements of BMD at each skeletal site of all rats with or without repositioning. Significance of differences between group 1b (six rats out of group 1a, which were come under group 2) and group2 were evaluated with Wilcoxon Signed Rank Sum Test. Results: CVs obtained at different skeletal sites of all measurements in Group 1b and 2. It was $3.51{\pm}1.20$, $ 2.62{\pm}1.20$ for the hindlimb (p=0.173), $3.83{\pm}2.02$, $4.59{\pm}2.02$ for L1-4 (p=0.600), $3.73{\pm}1.87$, $1.53{\pm}0.89$ for skull (p=0.046), and $2.92{\pm}0.60$, $1.45{\pm}0.60$ for pelvic bones (p=0.075). Conclusion: Our study demonstrates that the DXA technique has the precision necessary when used to assess BMD for various skeletal sites in rats regardless of repositioning.

• Korean Journal of Food Science and Technology
• /
• v.52 no.5
• /
• pp.555-559
• /
• 2020

In order to examine the toxicity of palatinose-L (Pal-L) bioconverted from sucrose, we performed a 14-consecutive day toxicity study with male and female Sprague-Dawley (SD) rats. We recorded clinical signs of toxicity, body weight, organ weights, hematology, blood biochemical, urinalysis, histological changes in organs, such as the liver and kidneys, and clinical chemistry analysis data for all SD rats. There were no significant changes in food/water consumption, body weight, and organ weights during the experimental period. Although there were some hematologic and urinalysis alterations, these changes were not considered toxicologically significant. In addition, histopathological examination of the liver and kidneys revealed no abnormal or toxicological changes between the control and Pal-L-treated rats of both sexes. Collectively, these results suggest that Pal-L was not indicated to have any toxicity in the SD rats when it was orally administered up to a dose of 1,000 mg/kg/day for 14 days.

• Journal of Korea Society of Industrial Information Systems
• /
• v.2 no.2
• /
• pp.1-9
• /
• 1997

최근들어 사업장에서의 안전 설비를 개선하기 위한 정부의 자금과 안전관리 수준을 높여 산업재해 예방을 위하여 제도 개선등에 의하여 산재 예방의 중요성이 불구하고 전체의 사업장중, 건설 재해의 현황은 좀처럼 줄어들지 않은 상황에 있다. 이는 작업장의 장기근속 긱간에 따른 작업자의 수보다는 건설 현장에서의 단기 작업자의 수요를 필요로 하고 있기 때문이라는 이유도 있지만, 건설 재해를 살펴보면 일반적인 재해가 반복적으로 일어나고 있다. 이는 제도적인 보완과 작업자의 안전교육을 통한 재해의 위험성을 알리는데 주안점을 두어야 한다고 할 수가 있을 것이다. 본 연구는 건설 재해를 예방하기 위한 가장 기초적인 방법인 노동부의 산업 재해분석자료를 통하여 일반적인 재해 현황, 재해의 발생 원인 및 특성을 분석하여 건설업에서 반복되어지는 재해를 파악하고 이에 따른 특성을 분석하였다. 이 연구의 결과, 재해는 연속적인 반복으로서, 우리 나라의 재해는 과거나 현재가 별 차이가 없다. 이는 재해의 불감증에서 나타난 결과이므로, 이에 대한 새로운 인식과 정부 및 노사 모두가 대비책에 대한 노력이 절실히 요구되어지며 , 산업재해의 통계자료또한 정확한 기초자료를 사용할 수 있게끔 할 수 있는 제도적인 방침이 필요로 한다는 것을 알 수가 있었다.