• 제목/요약/키워드: 차음측정

검색결과 90건 처리시간 0.027초

공동주택 입주 전.후 세대에서의 잔향시간 측정 및 비교 (Field Measurement of the Reverberation Time in Occupied and Unoccupied Apartment Houses)

  • 이병기;김병준
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2005년도 추계학술대회논문집
    • /
    • pp.654-657
    • /
    • 2005
  • The aim of this study is to investigate and to analyze the reverberation times of apartment houses Measurements were conducted in a total of 44 rooms(36 rooms were in occupied houses and 8 rooms were in unoccupied houses) according to KS F 2864. The results showed that the averaged reverberation time of the occupied and the unoccupied houses were about 0.3$\sim$0.5sec and 1.2$\sim$l.5 sec, respectively, at 500Hz octave band frequency. And the averaged absorbtion coefficient of the occupied and the unoccupied houses were about 0.13$\sim$0.35 and 0.11$\sim$0.20, respectively. In addition, We verified that the reverberation time generally depended on the frequency; the lower the frequency, the higher the reverberation time.

  • PDF

차음시트의 음향투과손실 측정에 관한 연구 (A Study on the Sound Transmission Loss Measurement of Sound Isolation Sheets)

  • 이동훈;강문;이주원;정갑철;권영필
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2000년도 추계학술대회논문집
    • /
    • pp.409-414
    • /
    • 2000
  • A new impedance tube method is presented for the measurement of transmission loss of sound isolation sheets. The two-microphone method based on the sound decomposition theory proposed by Seybert and Ross is reviewed in this impedance tube method, which has been used for the determination of absorption coefficient of absorptive materials as well as transmission loss of automotive mufflers. Sound transmission losses for rubber, polyvinyl and asphalt sheets are measured in an impedance tube and reverberation room facility, respectively. By comparing two measurement methods, the reliability of impedance tube method used in this study is validated. From the experimental results, it is shown that the accuracy of sound isolation capability obtained by the impedance tube method depends upon the microphone spacing and the distance of the first microphone from the test sample surface.

  • PDF

파라메트릭 어레이를 이용한 공기 중 디지털 통신 연구 (A Study on Digital Communication in Air Using Parametric Array)

  • 제엽;이재일;이종현;문원규
    • 한국음향학회지
    • /
    • 제28권8호
    • /
    • pp.768-773
    • /
    • 2009
  • 본 논문에서는 파라메트릭 어레이를 이용한 공기 중 디지털 통신의 특성을 측정해 보았다. 2차 오더의 비선형 현상인 파라메트릭 어레이를 구현하기 위하여, 고출력, 고효율의 음파 발생이 가능한 요철 트랜스듀서가 사용되었다. 1차 음파 (primary wave)의 주파수는 트랜스듀서 공진 주파수에 맞추어 83 kHz, 122 kHz 로 결정하였고, 이를 통해 발생되는 39 kHz의 차음 (difference frequency wave)을 통신 신호로 이용하였다. 통신 변조방법으로 On-Off Keying 방식을 이용하였다. 실험은 파라메트릭 어레이를 이용한 디지털 통신의 특성을 측정하기 위하여 파형 분석을 하였고, 거리, 각도에 따른 SNR을 측정해 보았다. 실험 결과 파라메트릭 어레이를 이용한 디지털 통신은 3m이내의 근거리 영역에서 적합함을 알 수 있었고, 빔폭 (-3 dB)은 $14^{\circ}$로 측정되어 고지향성 통신이 가능함을 확인하였다. 위의 실험 결과를 통해 파라메트릭 어레이를 이용한 공기 중 음향 통신에 대한 가능성을 확인하였고, 고지향성 통신 특성은 다중경로 문제나 보안 문제에 강점이 있을 것으로 판단된다.

마이크로폰의 위치에 따른 중량 바닥충격음레벨의 편차 (Deviation of Heavy-Weight Floor Impact Sound Levels According to Measurement Positions)

  • 오양기;주문기;박종영;김하근;양관섭
    • 한국음향학회지
    • /
    • 제25권2호
    • /
    • pp.49-55
    • /
    • 2006
  • 현행 중량 바닥충격음 표준 측정방식인 KS F 2810-2에 의하면 중앙점을 포함한 3-5곳의 타격위치에 대하여 수음실에서 4곳 이상의 지점의 피크레벨을 측정하도록 되어있다. 그러나 이 표준 방식에 의한 동일 상황에서의 측정 결과가 측정기관, 측정횟수, 측정점의 위치 등에 따라 일관성을 보이지 못하고 있음이 종종 발견된다. 이러한 편차는 반복성이나 재현성의 측면에서 측정값의 신뢰도에 영향을 미칠 수 있는 수준으로 우려된다. 측정결과 실험실의 경우 중앙 타격시 63Hz 대역에서 각 지점간의 차이가 l0dB이상 차이를 보였으며, 전체적으로 중간주파수 대역에서 보다 저주파수 대역에서의 편차가 크게 발생하는 것으로 나타났다. 이러한 편차는 저주파수 대역에서의 모드 중첩현상에 의한 것으로 보인다. 현행 바닥충격음 단일지수 평가 방법에 따라 평가한 결과 측정위치에 따라 단일지수 평가값에 2-7dB의 차이를 보였으며 바닥충격음 차음성능 평가에 영향을 줄 수 있을 것으로 판단되었다. 따라서 향후 저주파 대역의 편차를 줄이거나 저음의 모드 중첩에 의한 영향을 배제할 수 있는 측정 혹은 평가 방식의 개선이 필요하다고 사료된다.

건설 소음.진동의 사전 영향성 분석에 관한 연구 (Study on Preliminary Influence Analysis of Construction Noise and Vibration)

  • 안명석;김화일;박주한
    • 화약ㆍ발파
    • /
    • 제32권2호
    • /
    • pp.25-30
    • /
    • 2014
  • 건설공사 현장에서 발생하는 소음 진동은 일시적이고 간헐적으로 발생하지만 그 영향은 매우 크다. 건설기계의 적은 소음 진동이라도 발생하면 먼 거리까지 전달되어 차음 및 방진 등의 대책이 어려워 이를 해결하기 위해 본 연구에서는 건설장비의 소음 진동 안전기준을 30m로 적용하였고 발파소음은 60m, 진동은 160m로 적용하였다. 지금까지는 2D를 사용한 모델링을 주로 사용하였으나 건물이나 산과 언덕 등 크기와 높이를 고려한 3차원 3D 모델링으로 측정 분석하여서 정확도를 높였다.

차음상자와 전자청진기로 기록된 장음에 의해서 깨어 있는 흰쥐의 위수축력 측정 (Measurement of Gastric Contractility of Awake Rats by Bowel Sounds Recorded through an Electronic Stethoscope in a Sound Insulation Box)

  • 윤상협
    • 대한한방내과학회지
    • /
    • 제35권4호
    • /
    • pp.439-447
    • /
    • 2014
  • Objectives: The aim of this study was to investigate whether 1) variation of bowel sounds recorded stably through an electronic stethoscope in a sound insulation box can be related with that of gastric contraction and 2) if they are thus useful tool in the measurement of the gastric contractility in awake rats or not. Methods: Electrical potentials of both electronic stethoscope of bowel sound and force transducer were recorded simultaneously and continuously in the sound insulation box for the starting 30 min of basal state, and then 30 min of 0.2 ml normal saline administration, finally 30 min of 0.2 ml mosapride citrate solution (100 mg/Kg) in rats. Each motility index of normal saline or mosapride citrate treatment was presented with ratio against the basal state by using integrated electrical potentials. Results: A pattern of significance of gastric contractility between bowel sound and force transducer was showed analogously. Conclusions: The amplitude of bowel sounds recorded by the electronic stethoscope related with the intensity of gastric contractions. This confirms that a sound insulation box and electronic stethoscope are useful tools in the measurement of the gastric contractility of awake rats.

차음재의 음향투과손실 측정에 Two-Microphone Impedance Tube Method의 적용과 한계 (The Limit and Application of Two-microphone Impedance Tube Method to the Sound Transmission Loss Measurement of Sound Isolation Materials)

  • 이승;안민홍;이동훈
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2002년도 춘계학술대회논문집
    • /
    • pp.883-888
    • /
    • 2002
  • This study describes the limit and application of the two-microphone impedance tube method to the sound transmission loss measurement of several sound isolation materials with different physical properties. For the sound isolation materials having small flexural rigidity, it is shown that the two-microphone impedance tube method is validated to practically measure the sound transmission loss. For the sound isolation materials having large flexural rigidity, on the other hand, it is found that the two-microphone impedance tube method is no longer valid to measure the sound transmission loss because the regions of resonance and mass law are moved into the higher frequencies. In addition, in order to accurately measure the sound transmission loss of sound isolation materials, their size should be decided based on the consideration of the effect of acoustic excitation on their vibration response.

  • PDF

발포알루미늄을 이용하여 제조한 기능성 판넬 특성 연구 (Characteristics of the Functional Panel Made from Foamed Aluminum)

  • 김재용;엄명헌;안대현;심명진
    • 공업화학
    • /
    • 제17권1호
    • /
    • pp.62-66
    • /
    • 2006
  • 본 연구에서는 폐 알루미늄을 이용하여 제조한 환경친화형인 발포 알루미늄 기능성 판넬의 특성을 조사하였고, 증점 공정, 교반 혼합 공정, 발포 공정, 냉각 공정을 거쳐 첨색 공정에 의한 제품 품질의 고급화를 추구하였다. 시험은 크게 세 가지로 구분하여 음향투과 손실 시험, 흡음율 측정 시험, 그리고 발포작업조건 및 스크랩 혼합시험을 시행하였다. 그 결과 폐 알루미늄을 이용해 만든 기능성 판넬은 초경량성이며 방음과 차음, 유해전자파 차폐에 탁월하고 약 $2.2kcal/mh^{\circ}C$ 정도로 낮은 열전도율 및 뛰어난 단열효과를 보이는 것으로 나타났다.

바닥충격음 측정 및 차음 평가의 방향 (Improvement of Floor Impact Noise Measurement and Method for Rating Floor Impact Noise Isolation Performance)

  • 정정호;정영;서상호;송희수;전진용
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2004년도 추계학술대회논문집
    • /
    • pp.269-274
    • /
    • 2004
  • The aims of this study were to Investigate the floor impact noise isolation performance of floating floor with isolation materials and propose the improvement direction of floor impact noise measurement method and evaluation classes using impact ball. Reduction of light-weight impact sound pressure level can be achieved by the finishing materials, such as vinyl finishing material and wooden flooring with isolation materials. Floor impact noise Isolation material which satisfy the properties of the floor impact noise isolation materials cause resonance in the low frequency band and worsen heavy-weight impact sound pressure level. Heavy-weight impact sound level can be reduced by using noise reduction flooring, ceiling and increase of slab thickness. Strong impact force in low frequency bang below 63Hz of bang machine is not similar to human impact source and causes some problem in evaluating heavy-weight impact noise but heavy-weight impact noise measurement and evolution using impact ball which is very similar to human impact is more reliable than bang machine. Correction value on the background noise and sensitivity of residents should be considered on the floor impact noise evaluation classes.

  • PDF

터널 발파에서 방음재질을 고려한 방음문 개발에 관한 연구 (Development of Noise-proof Facility Considered with Soundproofing Materials in a Tunnel Blasting)

  • 정재형;원연호
    • 한국지반환경공학회 논문집
    • /
    • 제12권3호
    • /
    • pp.27-35
    • /
    • 2011
  • 본 연구는 터널발파에서 소음저감을 목적으로 설치되는 방음시설 개발을 위하여 현장에서 주로 사용되는 방음재와 물, 모래 등을 이용하여 각 재질에 따른 소음저감효과를 판단하였다. 최대 소음레벨과 주파수의 범위를 측정하여 방음재질별 소음감쇠도와 주주파수 대역의 음압레벨을 고찰하였다. 그리고, 방음재료 분석의 결과를 반영하여 물과 스펀지 등으로 채운 개량형 워터튜브 방음문과 기존 스펀지 부직포 등으로 채운 방음문을 축소 제작하여 화약을 사용하여 실대형 현장실험을 통한 검증을 하였다. 그 결과 물을 차음재료로 사용한 경우에 기존 방음문에 비해 약 10dB(A) 정도의 소음 저감효과를 나타내었다.