• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.5
• /
• pp.895-901
• /
• 2016

The next generation wireless and satellite communications require high transmission efficiency and high reliability to provide various services with subscribers. To satisfied these requirements, incorporated MIMO (Multiple Input Multiple Output) system with FTN (Faster Than Nyquist) techniques based on layered space time coded method are considered in the paper. To improve performance, STTC (Space Time Trellis Code) was employed as an inner code. As the same as SISO (Single Input Single Output) system, the outer codes are turbo codes. In receiver side, BCJR algorithm is used for STTC decoding in order to eliminate interferences induced by FTN transmission. They can yield significantly increased the data rates and improved link reliability without additional bandwidth. Therefore, we proposed a new decoding model for MIMO FTN model and confirmed that performance was improved compared to conventional SISO model according to amount of interference for FTN.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.2
• /
• pp.175-181
• /
• 2018

Electric pump system is new technology for next generation propulsion unit. The system has simple structure which dose not need gas generator, injector and turbine and might better pump for low cost and low payload rocket. Therefore, this paper suggests conceptual design of electric-pump Permanent-Magnet Synchronous Motor (PMSM) which has 50 kW & 50,000 RPM for rocket. To satisfy the system's requirement, electromagnetic analysis is conducted for suitable inner and outer diameter of stator and rotor which uses 4000 Gauss cylinder magnet and Inconel 718 can to fix whole rotor. Futhermore, to confirm rotational vibration, rotordynamics analysis is conducted. By this analysis, Campbell diagram is printed. From the diagram, natural frequency could be determined for the only motor and dynamo meter test bench.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.10 s.101
• /
• pp.965-972
• /
• 2005

In this paper, we first review LDPC codes in general and a belief propagation algorithm that works in logarithm domain. LDPC codes, which is chosen for second generation digital video broadcasting standard, are required a large number of computation due to large size of coded block and iteration. Therefore, we presented two kinds of low computational algorithm for LDPC codes. First, sequential decoding with partial group is proposed. It has same H/W complexity, and fewer number of iteration's are required at same performance in comparison with conventional decoder algerian. Secondly, early detection method for reducing the computational complexity is proposed. Using a confidence criterion, some bit nodes and check node edges are detected early on during decoding. Through the simulation, we knew that the iteration number are reduced by half using subset algorithm and computational complexity of early detected method is about $50\%$ offs in case of check node update, $99\%$ offs in case of check node update compared to conventional scheme.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.12
• /
• pp.51-60
• /
• 2004

DAB(Digital Audio Broadcasting) is a new media service that can provide CD quality audio, various data service, interactive and high quality mobile communications through popular media such as terrestrial broadcasting, satellite, cable TV, and internet. In this paper, a new EPG(Electronic Program Guide) application model is proposed. The model is based on DAB and combines a DAB receiver and PCs so that it can take advantages of using various multimedia services and plenty of internet contents. The developed EPSD(EPG Provider System on DAB) has Web-based Server/Client structure and povides EPG functionalities to client PCs over internet. Therefore, the DAB receiver can be smaller and cheaper, and can develop abundant data services on internet. It can also provide high quality video services and be expected to become an important component in future home network systems.

• Journal of Advanced Navigation Technology
• /
• v.19 no.4
• /
• pp.265-277
• /
• 2015

Automatic dependent surveillance-broadcast (ADS-B) is the core technology of communication, navigation and surveillance/air traffic management (CNS/ATM), automatically broadcasts its own position information using GNSS and has an advantage of lower geological constraints and faster update speed compared with legacy radar systems. EUROCONTROL defined all purpose structured eurocontrol surveillance information exchange (ASTERIX) CAT.021. ASTERIX CAT.021 is modified several times, but it has compatibility issues with previous version of it. In this paper, we have designed an efficient message processing module regardless of the version of ASTERIX CAT.021. This implemented module generates patterns to collect messages received from the network, after that, received messages are processed in the routine that is defined in accordance with the patterns.

• Journal of Advanced Navigation Technology
• /
• v.19 no.1
• /
• pp.22-32
• /
• 2015

Ground based augmentation system (GBAS) is a next generation radio navigation aids to support precision approach of aircraft. Recently, airports installing GBAS and providing GBAS service are increasing all over the world. For the first time in Korea, SLS-4000 which is the GBAS ground equipment of Honeywell had been installed at Gimpo International Airport in 2013, and evaluated its functionality and performance of through the ground testing. This paper introduces a ground test and evaluation criteria on the CAT-I GBAS system, and describes testing methods for GBAS ground testing of Gimpo International Airport. In addition, detail testing methods and analysis results on major five of 12 ground test items are described.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.12
• /
• pp.1950-1958
• /
• 2016

Today, technique for precisely positioning vehicles is very important in C-ITS(Cooperative Intelligent Transport System), Self-Driving Car and other information technology relating to transportation. Though the most popular technology for vehicle positioning is the GPS, its accuracy is not reliable because of large delay caused by multipath effect, which is very bad for realtime traffic application. Therefore, in this paper, we proposed the Vision-Based High Accuracy Vehicle Positioning Technology. At the first step of proposed algorithm, the ROI is set up for road area and the vehicles detection. Then, center and four corners points of found vehicles on the road are determined. Lastly, these points are converted into aerial view map using homography matrix. By analyzing performance of algorithm, we find out that this technique has high accuracy with average error of result is less than about 20cm and the maximum value is not exceed 44.72cm. In addition, it is confirmed that the process of this algorithm is fast enough for real-time positioning at the $22-25_{FPS}$.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.2
• /
• pp.171-177
• /
• 2012

In this paper, we proposed a algorithm and an operation boundary for fault detection of a onboard GNSS receiver. After aircraft exchange corrections computed by an aircraft receiver, a faulty aircraft receiver is detected by checking consistency of correction. For this purpose, PRC residual is used as the test statistic for fault detection of the onboard GNSS receiver. And operation boundaries are set by using DGPS position error increase with respect to the distance from a reference station. If the fault detection is performed by using aircraft only in operation boundary, the more accurate fault detection can be possible.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.42 no.9
• /
• pp.789-794
• /
• 2014

The FPGA is used to the high speed digital satellite communication on the Digital Signal Process Unit of the next generation GEO communication satellite. The high capacity FPGA has the high power dissipation and it is difficult to satisfy the derating requirement of temperature. This matter is the major factor to degrade the equipment life and reliability. The thermal control at the equipment level has been worked through thermal conduction in the space environment. The FPGA of CCGA or BGA package type was mounted on printed circuit board, but the PCB has low efficient to the thermal control. For the FPGA heat dissipation, the heat sink was applied between part lid and housing of equipment and the performance of heat sink was confirmed via thermal vacuum test under the condition of space qualification level. The FPGA of high power dissipation has been difficult to apply for space application, but FPGA with heat sink could be used to space application with the derating temperature margin.

• Journal of the Korea Society of Computer and Information
• /
• v.20 no.2
• /
• pp.79-88
• /
• 2015

This paper introduces surveillance equipment "ADS-B", the core subject of traffic control system and study of ADS-B 1090ES ground receiver. The standard is set not only for functional but also its reliability by analyzing international standard documents and existing products. The Bias circuit is designed for less power consumption, low noise and high gain for RF module. The signal processing is capable of overcoming its bad conditions. MCU part is configured with the latest CPU for high speed communication with external parts and SNMP is selected for remote control communication. The performance of developed receiver satisfies national and international standards and its functions are more advanced compared to foreign receivers.