• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.13 no.5
• /
• pp.147-155
• /
• 1993

An urban runoff model is proposed in this study, which is composed of a surface runoff model and a channel routing model. ILLUDAS is selected as the best fit model for the surface runoff computation, and the dynamic wave model using weighted four-point implicit finite difference scheme is used to perform the channel routing. The 3rd Seongbook bridge basin located in Seoul is selected as the test basin for the proposed model, and the rainfall-runoff data are collected to calibrate and verify the urban runoff model. The computed results by this model showed the fair accuracy when compared with the observed hydrographs. So the model proposed in this study could be used to compute the urban river flow as well as the outflow from the urban drainage area.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.7 no.1
• /
• pp.41-55
• /
• 2003

A dynamically-interfaced multi-grid finite difference model for simulation of tsunamis in the East Sea(Choi et al.) was established and further applied to produce detailed feature of coastal inundations along the whole eastern coast of Korea. The computational domain is composed of several sub-regions with different grid sizes connected in parallel of inclined directions with 16 innermost nested models. The innermost sub-region represents the coastal alignment reasonably well and has a grid size of about 30 meters. Numerical simulations have been performed in the framework of shallow-water equations(linear, as well as nonlinear) over the plane or spherical coordinate system, depending on the dimensions of the sub-region. Results of simulations show the general agreements with the observed data of run-up height for both tsunamis. The evolution of the distribution function of tsunami heights is studied numerically and it is shown that it tends to the log-normal curve for long distance from the source.

• Geophysics and Geophysical Exploration
• /
• v.12 no.2
• /
• pp.183-191
• /
• 2009

Finite difference method using not general SSG (standard staggered grid) but RSG (rotated staggered grid) was applied to simulation of elastic wave propagation. Special free surface boundary condition such as imaging method is needed in finite difference method using SSG in elastic wave propagation. But free surface boundary condition in finite difference method using RSG is easily solved with adding air layer or vacuum layer. Recently PML (Perfectly Matched layer) is widely used to eliminate artificial reflection waves from finite boundary because of its' greate efficiency. Absorbing ability of CPML (convolutional Perfectly Matched Layer) that is more efficient than that of PML and CPML that don't use splitting of wave equation that should be adapted to PML was applied to FDM using RSG in this study. Frequency absorbing characteristic and energy absorbing ability in CPML layer were investigated and CPML eliminated artificial boundary waves very effectively in FDM using RSG in being compared with that of Cerjan's absorbing method. CPML method also diminished amplitude of waves in boundary layer of solid-liquid model very well.

• Journal of Korea Water Resources Association
• /
• v.33 no.3
• /
• pp.331-340
• /
• 2000

This study aims to develop a methodology of real time forecasting of mundation risk based on DAMBRK model and Kalman filter. The model is based on implicit, nonlinear finite difference approximatIons of the one-dimensional dynamic wave equations. The stochastic estimator uses on extended Kalman filter to provide optimal updating estimates. These are accomplished by combining the predictions of the determurustic model with real time observauons modified by the Kalman filter gain ractor. Inundation risks are also estimated by applying Monte Carlo simulation to consider the variability in cross section geometry and Manning's roughness coefficient. The model calibrated by applying to the floods ot South Han River on September, 1990 and August, 1995. The Kalman tilter model indicates that significant improvement compared to deteriministic analysis in flood routing predictions in the river. Overtopping risk of levee is also presented by comparing levee height with simulated flood level. level.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.4
• /
• pp.407-415
• /
• 2011

The stability condition and wideband characteristics of 3D ID-FDTD algorithm which has low dispersion error with isotropic dispersion are presented in this paper. 3D ID-FDTD method was proposed to improve the defect of the Yee FDTD such as the anisotropy and large dispersion error. The published paper calculated the stability condition of 3D ID-FDTD algorithm by using numerical method, however, it is thought that the examples were not sufficient to verify the stability condition. Thus, in this paper, various simulations are included in order to hold reliability under the conditions that the plane wave propagation is assumed with a single frequency and a wideband frequency. Also, the 3D ID-FDTD algorithm is compared to those that have the similar FDTD algorithm with ID-FDTD such as Forgy's method and non-standard FDTD method in a wideband. Finally, the radar cross section(RCS) for the large sphere with high dielectric constant is calculated.

• The Journal of the Korea Contents Association
• /
• v.7 no.3
• /
• pp.176-186
• /
• 2007

As SAR data have the strong point that is not influenced by weather or light amount in comparison with optical sensor data, they are highly useful for temporary analysis and can be collected in time of unforeseen circumstances like disaster. This study is to extract DEM from L-band data of JERS-1 SAR imagery using InSAR and DInSAR processing techniques. As a result of analyzing the extracted coherence and interferogram images, it was shown that the DInSAR 3-pass method produces more suitable coherence values than the InSAR method. The accuracies of DEM extracted from the SAR data were evaluated by employing the DEM derived from the digital topographic maps of 1:5000 scale as reference data. And it was ascertained that baselines between antenna locations largely affect the accuracy of extracted DEM.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.21 no.2
• /
• pp.166-172
• /
• 2018

To develop and evaluate the real-time SAR(Synthetic Aperture Radar) motion measurement system, true antenna phase center(APC) positions during SAT(Synthetic Aperture Time) are needed. In this paper, CDGPS(Carrier phase Differential Global Positioning System) post processing method is proposed to get the true APC position for spotlight SAR image formation. The CDGPS position is smoothed to remove high frequency noise which exists inherently in the carrier phase measurement. This paper shows smoothed CDGPS data is enough to provide the true APC for high-quality SAR image formation through motion measurement result, phase error estimation and IRF(Impulse Response Function) analysis.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.6
• /
• pp.141-147
• /
• 2008

This paper describes the design of frequency down converting Mixer in the receiver to use compound semiconductor and CMOS product process. The basic theory and structure of frequency down converting Mixer is surveyed, and we design mixer circuit with active balun which use the compound semiconductor and CMOS process. This mixer convert a single ended signal to differential signal at input port of RF and LO instead of matching circuit to get dual band balanced mixer structure and characteristic broadband. This designed mixer has a conversion gain $-1{\sim}-6[dB]$ at $2{\sim}6[GHz]$ bandwidths. However, the simulation of the designed mixer with active balun has the result of a 7[dB] conversion gain for -2[dBm] LO input power and -10[dBm] input P1[dB] at 5.8[GHz].

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.433-437
• /
• 2015

XP-SWMM은 유한차분방법에 의한 천수방정식을 기반으로 하는 TUFLOW 엔진을 탑재하여 1차원 솔루션 엔진과 동적으로 연결하여 범람원에서의 흐름거동을 2차원으로 해석할 수 있다. 유역에서 발생한 모든 유출량은 해당 소유역의 노드(맨홀)로 유입되며 2차원 침수양상은 관로상태에 따라 노드를 통해 역류한 유출수에 의해서 폰딩(Ponding)되는 조건으로 모의한다. XP-SWMM의 침수범람 모의는 침수범람 상황을 가시적으로 보여주는데 상당한 강점을 가지고 있으나 실제 지형여건에 따른 자연현상을 엄밀하게 모델링하는데 일정부분 한계가 있다. 모형의 한계는 담수된 노드의 수위로 인한 에너지 영향(오리피스 흐름)으로 인접관로의 침수가 부가적으로 유발할 수 있다는 점이며 실제 대부분의 경사지에서의 침수상황은 노드에 유출수가 담수되지 않고 하류로 지면을 따라서 확산(Diffusion)되어 담수영향으로 인한 인접관로 침수가 추가적으로 유발되지 않을 가능성이 매우 높다. 즉, XP-SWMM의 담수허용조건, 지반고 2D연결 옵션은 유역에서의 침수발생량을 과대평가 할수 있으며 특정 유역에서는 실제 침수발생 상황과 차이가 발생 할 수 있는 것이다. 본 연구에서는 서울시 광화문 일대의 효자배수분구 우수관로를 SWMM으로 구성하고 강우조건 95mm/hr에서 노드조건을 담수허용, 2D연결, 담수없음 조건으로 모형을 수행하여 침수모의 결과를 비교, 검토하였다. 전체관로 노드조건을 담수허용, 2D연결로 설정하게 되면 담수없음 조건과 비교하여 1.2-2.8배의 침수발생량이 추가로 발생하는 것으로 검토되었다. 즉, 담수없음 조건의 경우 침수발생시 노면 수위상승 인한 동수경사 영향이 반영된 압력관로 영향이 반영되지 않아 노드간 침수발생량이 중복되지 않는다. 반면, 담수허용이나 2D연결로 모형을 수행할 경우 지면의 경사가 충분히 있는 지역에 침수가 발생하더라도 일정 수심이상의 수두(동수경사선)가 형성되어 침수를 추가로 유발하는 것으로 보인다.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.22 no.1
• /
• pp.35-40
• /
• 1977

The seed yield was the highest at the sowing of the 20th of September at Mokpo, and of the 30th .of September at Chungnam. And the correlation, also, was positively relative between them rape such as the 1st number of total branches and of podes per ear, the seed content .and seed yield. In accordance with the test it seemed that the suitable period of the Autumn sowing and Spring transplanting of rape was the 20th of September in Mokpo, and the 30th of September in Chungnam.