• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.10a
• /
• pp.131-133
• /
• 2014

Vibration exposure of the KTX and ITX-saemaeulho on the Gyung-Bu line was evaluated and compared in terms of human health based on ISO 2631. RMS value of KTX was calculated as much lower than ITX-saemaeulho in all travel sections. When VDV result of the two trains drived return travel from Seoul to Busan in single day is compared on the health guidance caution zone of ISO 2631, vibration exposure of KTX is safer than ITX-saemaeulho which is marginally under the caution line.

• The Science & Technology
• /
• v.34 no.1 s.380
• /
• pp.22-23
• /
• 2001

대전 KAIST 소음 및 진동제어 연구센터의 이정권 교수는 제반 음향이론 및 실험기법과 이에 대한 실제적용을 연구하는 중견과학자이다. 이교수는 음향학 중에서도 덕트 내의 음향전파, 차량의 소음 및 진동제어, 구조음향 및 이에 수반된 음장소음 및 진동제어를 집중적으로 연구하고 있어 주목을 받고 있다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2013.10a
• /
• pp.83-84
• /
• 2013

• Journal of Advanced Navigation Technology
• /
• v.12 no.6
• /
• pp.653-658
• /
• 2008

The automotive environment is particularly demanding on connector performance, and is characterized by large temperature changes, high humidity and corrosive atmospheres. Fretting is a contact damage process that occurs between two contact surfaces. Fretting corrosion refers to corrosion damage at the asperities of contact surfaces. This damage is induced under load and in the presence of repeated relative surface motion, as induced for example by vibration. This paper critically reviews the works published previously on fretting corrosion of electrical connectors. Various experimental approaches such as testing machines, material selection, testing environments, acceleration testing techniques and preventing methods are addressed. Future research prospects arc suggested.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.11
• /
• pp.1387-1395
• /
• 2013

When the center of mass of a railway wheel is not aligned with the geometrical center of the wheel axis, wheel unbalance occurs. If a railway vehicle runs without removing the wheel unbalance, vibrations will be produced. This will also cause wear and damage of the axle bearing. In this study, dynamic analysis of a railway vehicle with wheel unbalance was conducted to examine the reduction in critical speed and the resonance of the car-body and the effect on the magnitude of wheel unbalance was examined. In addition, the calculation of the car-body vibration owing to static and dynamic unbalance in the railway wheel shows that two-plane balancing is necessary.

• Journal of KSNVE
• /
• v.12 no.2
• /
• pp.113-119
• /
• 2002

‘인체진동(human vibration)’은 진동에 대한 인체의 반응(human response to vibration)의 줄임말로써, 환경으로서의 진동 및 충격이 인체에 미치는 물리적, 심리적 영향을 측정, 평가하는 것을 주요 연구대상으로 한다. 인체진동 분야의 주요 연구개발은 객관적인 물리량의 산출뿐만 아니라 주관적인 느낌을 수치화하는 작업을 포함하기 때문에 기계진동, 생체역학(biodynamics)과 기본적인 역학과 심리측정학(psychometrics), 심리물리학(psychophysics), 인간공학(ergonomics) 등과 같이 다양한 종류의 학문이 요구된다.(중략)

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.06a
• /
• pp.550-553
• /
• 2009

도로 환경 모니터링을 위한 센서 노드의 전력원으로 유도풍을 이용한 압전에너지 하베스팅 기술은 기존 재생 에너지의 설치 및 작동 조건에 영향을 받지 않고, 도로상에 주오염원인 자동차에서 발생되는 폐에너지를 활용하는 친환경적 에너지 순환시스템을 구현하는 핵심 요소이다. 차량 유도풍에 의해 발생되는 풍압으로 도로 상의 구조물에 진동을 유발한다. 이 때 발생한 진동 에너지는 압전체를 통해 전기 에너지로 변환, 저장할 수 있다. 이렇게 저장된 에너지는 센서의 구동과 무선 데이터 송수신을 위한 센서 노드의 전력원으로 사용함으로써 별도의 전력원이 필요없게 된다. 본 연구에서는 60km/h로 주행하는 한 대의 차량에 의해 2.7m/s의 유도풍이 발생하여 0.6g로 도로 상의 구조물에 에너지를 전달하게 된다. 전달된 에너지가 압전체를 통해 15uJ 전기에너지로 저장된다.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.12 no.8
• /
• pp.589-597
• /
• 2002

In this paper the nonstationary response of accelerating vehicle is firstly obtained by using nonstationary road roughness model in time domain. To get the result of nonstationary response in frequency domain, the maximum entropy method is used for Processing nonstationary response of vehicle in frequency domain. The three-dimensional transient maximum entropy spectrum (MES) of response is given.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.409-414
• /
• 2007

Nowadays, with the advancement of computational mechanics, and vehicle dynamics simulation linked up with virtual testing laboratory(VTL) and virtual proving ground(VPG) technologies has become a useful method for analyzing numerous driving performances and diverse noise/vibration characteristics. In this paper, the analytical vehicle model based on multi-body dynamics theory was developed to investigate the vibration characteristics according to various road conditions. For the purpose, the whole vehicle parameters, each vehicle's part parameter, and part connecting elements such as spring, damper, and bush were measured by an experiment. Also, the vehicle dynamics model, which includes the front suspension, rear suspension, steering, front wheel, rear wheel, and body subsystems has been constructed for computer simulation. With the developed vehicle dynamics model, three forces and three moments measured at each wheel center were applied to evaluate and analyze dynamics and vibration characteristics for miscellaneous road conditions.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.16 no.12 s.117
• /
• pp.1215-1223
• /
• 2006

A leaf spring suspension has been widely used since it can carry big load and its simplicity. But one major drawback is the poor ride performance because of the friction in the system and the high stiffness coefficient. To overcome these, an air spring suspension can be used. The air spring suspension system can improve the ride of the heavy vehicle significantly and also it can adjust the height to the loading and unloading. The road tests for the truck with the leaf spring suspension and air spring suspension are performed to compare the ride quality of the two systems. To develop the air spring suspension system tailored to the target truck, chassis development procedure using CAE has been applied.