• ICROS
• /
• v.2 no.2
• /
• pp.66-70
• /
• 1996

현재 차량 항법 장치는 최근 급속하게 발달한 전자기술을 활용하여 단순한 차량의 자유이동 기능에서 운전자에게 안전성, 효율성, 편의성, 가격 등을 보장할 뿐만 아니라 운전자에게 경로를 안내하거나 교통 정보를 제공하는 정보 제공 장치로 도약하고 있다. 그러나 앞으로 이같은 단순 정보 전달 기능을 초월하여 보다 효율적이고 안전한 운행이 가능한 지능적인 기능을 수행케 될 것이다. 즉, 도로상의 센서와 같은 교통 정보 수집체계와 통신체계 등을 활용하여 실시간 교통 상황 정보를 제공하여 쾌적한 추행환경 및 차량 제어 시스템과 연계하여 안전주행에 기여할 수 있다.

• International Journal of Highway Engineering
• /
• v.10 no.2
• /
• pp.135-143
• /
• 2008

According to the present highway design criteria, there are minimum standards which re ade from special design speeds. If some highways are satisfied the standards, it regards he highway as safety. In reality, however, most drivers drive a car at different speed compared with design speed. It is very dangerous for drivers especially at transition sections between curve and horizontal curve sections. Hence, this study calculated the rate of changing and horizontal acceleration at each section. Moreover, this study evaluated thesafety of design at curve transition sections and then calculated lateral acceleration and curve radii. This study found the minimum standards which are using as basic safety standards are not appropriate for measuring driver's safety.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.21 no.1
• /
• pp.51-63
• /
• 2022

Convoy driving is one of the technologies of multi-vehicle cooperation driving along with platoon driving. All over the world, research on vehicle control mechanisms to maintain vehicle formation during convoy driving convoy driving has been actively conducted and in Europe's Autonet 2030 project has developed and demonstrated convoy driving services for highways. But, even the concept of convoy driving is still insufficient in Korea. Therefore, in this study, the concept of convoy driving service was established and scenarios and communication messages for service application on urban roads were developed. And its effectiveness was verified through simulation analysis. As a result of comparing and analyzing individual vehicle cooperative driving and convoy driving for the blind spot support service and dilemma zone safety support service, which are representative V2I cooperative driving services on urban roads, the number of conflicts(indicator of traffic safety) and delays and stops(indicator of traffic efficiency) are significantly improved in convoy driving compared to individual vehicle cooperative driving.

• The Journal of the Korea Contents Association
• /
• v.22 no.4
• /
• pp.70-82
• /
• 2022

At the current stage of a semi-autonomous vehicle, there are situations in which the vehicle has to request take-over control to the driver quickly. However, current self-driving cars use only simple messages and warning sounds to notify drivers when handing over control, so they do not adequately convey considerations of individual characteristics or explanations of various emergent situations. This study investigated how visual and auditory information and the efficacy of drivers in self-driving cars can improve efficient take-over requests between the car and the driver. We found that there were significant differences in driver's cognitive load, reliability, safety, usability, and usefulness according to the combination of three visual and auditory information provided in the experiment of the take-over request situation. The results of this study are expected to help design self-driving vehicles that can communicate more safely and efficiently with drivers in urgent control transition situations.

• Proceedings of the KSR Conference
• /
• 2004.06a
• /
• pp.948-954
• /
• 2004

This study deals with the Evaluation of track system, when Newly developed Korea High Speed Train(KHST) by KRRI and KTX trains are running pass curved track of conventional line. In order to evaluate stability of track and vehicle running safety. the effect of curve radius, the field tests were performed at sharply curved track.

• Journal of the korean Society of Automotive Engineers
• /
• v.26 no.4
• /
• pp.23-25
• /
• 2004

차량은 주요한 운송수단으로서 현대인의 사회생활에 없어서는 안될 필수적인 생활도구이다. 이러한 현대사회의 이면에는 교통사고의 증가 및 교통체증에 의한 경제손실 등과 같은 크나 큰 사회적 문제들을 내포하고 있다. 교통사고는 인간, 도로, 차량의 요인들에 의해서 기인하는 점을 고려할 때, 교통안전을 위한 대책은 이들 세 가지 주요 요인들을 종합적으로 검토하여 유기적으로 협조할 수 있게 하는가에 달려 있다. 특히, 차량의 주행안전성과 편의성을 확보하기 위해서는 무엇보다도 안전하고 운전자를 보조할 수 있는 차세대 차량이 개발되어야 한다.(중략)

• Journal of the Korean Society for Railway
• /
• v.14 no.6
• /
• pp.562-568
• /
• 2011

Superimposition of horizontal and vertical curves occurs frequently owing to geographical conditions. It may hamper train ride comfort and running safety and inflate maintenance costs. In this study, when the horizontal and vertical curves are superimposed, in order to analyze the effects of the compensation cant, the analytical study for running safety, ride comfort and track forces was performed in high speed line. From the analysis results, it was found that it is better to apply the compensation cant at superimposition part.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.6
• /
• pp.723-730
• /
• 2013

The speed-limit regulation on a turnout is the main factor inhibiting the speed-up of conventional lines. The specified speed for a train moving through a turnout system is lower than that for a train traveling over the general track. This is done to ensure the running safety of a railway vehicle moving through a turnout. In this study, the shape change example of the guard rail component of a turnout in the Daegu Metropolitan Transit Corporation (DTRO) system was studied. A theoretical examination of the geometrical interaction formula according to wheel/rail shape at the turnout was conducted. Running safety analysis by changing the length of the guard rail on the F10/F12 turnout using the developed analysis techniques (by VI-Rail) was achieved, and the effect on railway safety was examined accordingly.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.6D
• /
• pp.767-774
• /
• 2008

This study has been developed the way that evaluates the road safety using the speed of individual vehicles at curve sections in 2-lane rural highways. For this study, we developed variation of operational speed for the individual vehicle using the speed of vehicles in 96points of selected roads. Drawing out of variation of operational speed for the individual vehicle, estimation models for speed variation of individual vehicles considering horizontal alignments and vertical alignments of the roads have been developed. These models presents the way to evaluate road safety out of the operational speed and acceleration of individual vehicles. Considering safety and based on the results of these study above, some regular spots are ranked by "good", "fair", "bad". The results that this study showed in this paper could be useful to derive some particular spots that needs to be improve in terms of safety.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.11
• /
• pp.1309-1315
• /
• 2014

The switch for a maglev vehicle should be designed such that the vehicle safely changes its track without touching the guiderail. In particular, a medium-to-low-speed EMS -type maglev train relies heavily on a U-type electromagnet where it generates levitation force and guidance force simultaneously. Therefore, it is necessary to evaluate the safety of the vehicle whenever it passes the switch, as it lacks active control of the guidance force. Furthermore, when the vehicle passes a segmented switch, which is a group of curves made up of connected lines with a small radius of curvature, it may come into mechanical contact with the guiderail owing to the excessive lateral displacement of the electromagnet. The goal of this study is to analyze the influence of a segmented switch on the safety of major design-related variables for achieving improved running safety. We propose a three-dimensional multibody dynamics model composed of two cars with one body. Using the proposed model, we perform a simulation of the lateral air gap, which is one of the measurements of the running safety of the vehicle when it passes the switch. The analyzed design variables are the length between short span girder, the articulation angle, the length between two centers of a fixed girder at its ends, and the number of girders. On the basis of the effects of the considered design variables, we establish an optimized design of a switch with improved safety.