• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.15 no.12
• /
• pp.990-1001
• /
• 1990

This paper compared and analyzed trellis coding with modem, discussed the basic concepts of it's structure and design. Logical observation was made on estimation method of coding gain and effect of error coefficient for trellis coding with modem. A signal space was analyzed on multidimensional coding in voiceband modem and differentially trellis coding with modem. As a result, we has obtained that 16 points constellation is more efficient than 2 dimensional.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.19 no.1
• /
• pp.14-19
• /
• 1982

A differential amplifier has been designed and fabricated using aluminum-gate PMOS technology, Only enhaneement-mode MOSFET's are used in the circuit and the dimensions of transistors have been determined using simulation program MSINC. The fabricated integrated circuit with +15V and -l5V power supplies shows an open-loop DC voltage gain of 42 dB, a common mode rejection ratio (CMRR) of 50 dB, and a Power consumption of 20mW.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.8
• /
• pp.891-897
• /
• 2003

In this paper, a circular orthogonal polarizer is newly fabricated and used in a differential detector to reduce the optical noise in a wireless optical interconnection. The orthogonal polarizer is composed of two semicircular polarizers whose transmission axes are orthogonal each other, The orthogonal polarizer is driven by a motor and matched to the signal polarization in order to reduce the optical noise interference. The noise power was reduced by about 20 dB using a differential detector with the orthogonal polarizer.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.2
• /
• pp.213-219
• /
• 2012

In this paper, we suggested the method of signal integrity for noises and distortion signal generated between high speed information transmission modules by external effects. Suggested method for signal integrity of impedance matching to remove transmission line distortion, We divided the impedance matching between the transmitter and the receiver module with the single line and differential line methods after confirmed the improvement of signal distortions through ADS simulation. the experimental results indicated that it is possible to keep signal integrity without signal distortions by matching the optimal termination impedance which are considering the signal delay of transmission line for using the high-performance modules.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.11
• /
• pp.836-845
• /
• 2001

A Novel fully-differential bipolar current subtracter(FCS) and its application to current controlled current amplifier(CCCA) for high-accuracy current-mode signal processing were designed. To obtain full-differential current output, the FCS was symmetrically composed of two current follower with low current-input impedance. The CCCA to control output current by the bias current was consisted of the subtracter and a current gain amplifier(CGA) with single-ended current output.. The simulation result shows that the FCS has current-input impedance of 5 Ω and a good linearity. The CCCA has 3-dB cutoff frequency of 20 MHz for the range over bias current 100 $\mu$A to 20 mA. The power dissipation of the FCS and CCCA are 1.8 mW and 3 mW, respectively.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2018.05a
• /
• pp.19-21
• /
• 2018

컴퓨팅 시스템의 고속화와 더불어 시스템, 서버의 내외부에서 다양한 미디엄에 기반 한 고속 신호 연결의 필요성이 증대되고 있다. Gbps 급 이상의 전송속도를 요하는 시스템 네트워크, 서버 시스템 버스 등의 활용에 있어서, 구리선 기반의 고속 케이블 미디엄이 널리 사용되고 있으며, 이들 케이블 미디엄의 속도는 점차 향상하고 있는 추세이다. 본 논문에서는, Gbps급의 고속 시스템 버스에 대한 케이블 미디엄 기반의 신호 송수신 실험을 통하여, 고속 신호전송에 사용 가능한 케이블 미디엄의 신호 특성 및 성능을 비교 분석 한다. Gbps급 전송의 실험을 위하여 차동 신호 당 10 Gbps급 이상의 전송속도를 가지는 microQSFP, Mini SAS HD, Passive Copper 케이블 미디엄을 사용하는 HW를 제작하여 실험하였다. 제작된 HD를 기반으로 8Gbps급 고속 신호의 병렬 전송 실험을 통하여 케이블 미디엄의 성능을 평가 하였다. 평가 결과, Passive Copper 케이블을 포함하여 모든 케이블 미디엄이 8Gbps 이상의 고속 전송에 적합함을 확인하였다.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.43 no.4 s.310
• /
• pp.53-59
• /
• 2006

This paper describes the new design technique of full wave rectifier (FWR) for precise measurement instrument and the chip implementation of this FWR circuit with measurement results. Conventional circuits have some problems of complex design and limited output range( $VDD/2{\sim}VLIIV1IT+$). Proposed FWR circuit was simply designed with two 2x1 MUXs, one high speed comparator, and one differential difference amplifier(DDA). One rail-to-rail differential difference amplifier(DDA) performs the DC level shifting to VSS and 2X amplification simultaneously, and enables the full range ($Vss{\sim}VDD$) operation. The proposed FWR circuits shows more than 50% reduction of chip area and power consumption compared to conventional one. Proposed circuit was implemented with 0.35um 1-poly 2-metal CMOS process. Core size is $150um{\times}450um$ and power dissipation is 840uW with 3.3V single supply.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2005.11a
• /
• pp.599-602
• /
• 2005

본 논문에서는 기존 단극성 원 빔 레이저 방식의 단점을 개선하기 위하여 듀얼 빔을 응용한 차량용 레이저 레이더 시스템을 설계하엿다. 양극성 m-시퀀스를 두 개의 레이저 파장에 할당함으로써 2차원 OOC(orthogonal optical codes)와 유사한 특성을 갖도록 하고 수신부에서 두 개의 단극성 신호를 차동구조를 이용하여 양극성 신호로 합성하는 방법을 이용, SNR 개선 방안을 제시한다. 시뮬레이션 결과, 제안한 듀얼 빔 방식이 기존의 원 빔 단극성 신호방식의 레이져 레이더 시스템에 비해 3dB의 SNR 개선이 가능함을 확인하였다.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.861-862
• /
• 2006

본 논문에서는 차동증폭기와 대역통과 필터를 이용한 심전도측정 시스템의 구현하고 동작을 확인하였다. 구현된 하드웨어의 성능평가를 위해 동일한 입력 신호에 대한 시뮬레이션 결과와 실제 출력을 비교 하였다. 또한, 실제 동작을 확인하기 위하여 심전도 신호 중 리드 II(lead II)파형을 추출하였다. 설계된 회로는 소형화 및 경량화가 가능하기 때문에, 유비쿼터스 환경에 서 이동 중 심전도신호의 측정에 적용가능하며 능동형 게임의 감성추출에도 적용 가능할 것으로 본다.

• The Journal of the Acoustical Society of Korea
• /
• v.38 no.2
• /
• pp.240-245
• /
• 2019

This paper is a study result on long distance transmission of underwater acoustic sensor data over cable. The data transceiver is designed using the LVDS (Low Voltage Differential Signaling) transmission scheme, and the jitter characteristics are analyzed by measuring the long distance transmission signal through the cable. In order to reduce the jitter, a pre-emphasis technique is applied to compensate the transmitting signal to be attenuated by long distance transmission, and the transmission characteristics were verified according to the distance.