• Proceedings of the KIPE Conference
• /
• 2017.07a
• /
• pp.32-33
• /
• 2017

기존 EMI 필터 설계의 경우, 설계 가이드 없이 반복적인 측정을 통해 규제를 만족하도록 설계하기 때문에 많은 시간을 소모하게 된다. 또한 필터 내의 불필요한 소자 사용으로 인해 회로의 부피 및 가격 상승의 문제점이 있다. 따라서 본 논문은 대상 시스템에 대한 노이즈를 공통모드 노이즈(Common Mode Noise)와 차동모드 노이즈(Differential Mode Noise)로 분리하여 측정하였으며, 등가회로 모델링 및 제안 설계 가이드를 통해 최적 EMI 필터를 설계하였다. 또한 제안 EMI 필터 설계방법을 통해 설계 시간 단축, EMI 필터 단가 및 부피 저감이 가능하게 된다. 본 논문에서는 제안 방법을 이론으로 분석하고 모의실험을 통해 확인하였으며, 실제 측정을 통해 제안 방식의 우수성을 검증하였다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.3
• /
• pp.319-332
• /
• 2014

Insertion loss is used as the character to express the efficiency of EMI filter. In this paper, we studied the better method that can measure the insertion loss of EMI filter exactly than the original method. For the achievement of this, the method measuring both common mode(CM) and differential mode(DM) insertion loss with arbitrary input/output impedance is accomplished using a 4-ports S-parameters system for consideration of unbalanced factor. Using this method, when input/output used in specific system is known, CM/DM insertion loss of EMI filter inserted in the system can be calculated. Finally, we applied 4-ports modeling method to 'X/Y capacitor part' and suggested the algorithm for selecting suitable the value of Y-capacitor using mixed mode S-parameters and mixed mode chain S-parameters.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.2
• /
• pp.47-53
• /
• 2013

In this work, signal transmission properties of SATA connector have been improved using its differential impedance calculation and its design revision to closer impedance matching. Using 3 dimensional electromagnetic field simulator, the differential mode S-parameter was calculated to investigate its signal fidelity. The differential impedance is calculated from the equation of the odd mode impedance with inductance, capacitance, mutual inductance, and mutual capacitance. The differential impedance of SATA connector was calculated to be $107.3{\Omega}$ and did not meet the design specification with $100{\Omega}{\pm}5%$. In order to achieve its impedance range and improve its signal transmission properties, SATA connector's design has been revised with two different directions and analyzed through the calculation of differential impedance, differential reflection loss, and differential insertion loss.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.8
• /
• pp.40-47
• /
• 2005

The objective of this paper is to analyze power system dynamics influenced by UPFC(Unified Power flow Controller) operation and to develop a refined DCRM(Differential Current Relaying Method) to protect the transmission line with UPFC effectively. The implementation of control strategies for UPFC introduces new power system dynamic problems that must be considered while applying the conventional DCRM. In this paper, impact of UPFC operation on the DCRM has been reviewed and a refined DCRM has been proposed to detect faults properly in spite of UPFC operation. The porposed method is verified by simulation on the line-faulted system with UPFC.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.683-686
• /
• 1998

This paper introduces a sigma-delta DAC with a fully-differential current-mode semidigital IFIR postfilter. A proposed fully-differential postfilter exhibits not only an improved SNR(signal-to-noise ratio) but also a reduced opwer dissipation.

• Aerospace Engineering and Technology
• /
• v.5 no.2
• /
• pp.67-76
• /
• 2006

This paper describes the analysis method to define the system specification for conducted EMI environment and verification method to evaluate the conducted EMI performance. Conducted EMI environment is characterized by the electrical power subsystem which is mainly issued by the switching circuit noise, common ground impedance coupling. To define and control these EMI problems, EMI assesment through system analysis are preceded at the early design phase and then EMI reduction methods are applied during the unit/system development phase. System EMC should be carefully controlled and designed in the consideration of EMC safety margin and its performance is fully evaluated at the whole development period.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.10
• /
• pp.1477-1483
• /
• 2013

This paper proposes a low-voltage current-mode integrator for a continuous-time current-mode baseband channel selection filter. The low-voltage current-mode linear cascode integrator is introduced to offer advantages of high current gain and improved unity-gain frequency. The proposed current-mode integrator has fully differential input and output structure consisting of CMOS complementary circuit. Additional cascode transistors which are operated in linear region are inserted for bias to achieve the low-voltage feature. Frequency range is also controllable by selecting proper bias voltage. From simulation results, it can be noticed that the implemented integrator achieves design specification such as low-voltage operation, current gain, and unity gain frequency.

• Proceedings of the KIPE Conference
• /
• 2013.11a
• /
• pp.27-28
• /
• 2013

이 논문에서는 부분 그늘짐에서도 다중 태양광 모듈의 최대 전력점 추종이 가능한 셔플링 차동전력 마이크로 컨버터를 설계 및 구현하였다. 마이크로 컨버터 시스템은 PV에 직접 연결된 셔플링 컨버터와 이후 단으로서 부스트 컨버터가 존재한다. 셔플링 컨버터는 다이렉트-시비율 기법을 통하여 PV모듈을 최대전력으로 동작시키고, 부스트 컨버터는 전압루프를 통하여 P&O 방식으로 최대 전력점을 추종하였다. PV 모듈에 병렬로 셔플링 컨버터를 적용함으로써, 다중 태양광 모듈의 전류 편차를 차동전력으로 조절하여 각각의 최대 전력점을 추종하면서 안정된 동작을 유지할 수 있다. 제안하는 컨버터는 2개의 PV모듈이 연결된 정상상태 연속모드 (CCM) 160[W]급 마이크로 컨버터 하드웨어 프로토타입을 통해 동작특성을 분석하였다.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.9 no.1
• /
• pp.81-87
• /
• 2004

This paper describes a design method of electromagnetic interference (EMI) filter for pulse-width modulation (PWM) inverter-fed AC drives used for home appliances such as washing machine and air conditioner. The generating and coupling mechanisms of the conducted EMI for AC drives are first investigated. The design procedure of the EMI filter based on the EMI separation principle is then presented. Experiments we carried out for the PWM inverter-fed induction motor drive system and it is shown that the results satisfy the EN55014 EMI regulation.

• Proceedings of the KIPE Conference
• /
• 2016.11a
• /
• pp.125-126
• /
• 2016

본 논문에서는 자율주행차량의 ISG시스템에서 비상발전용 양방향 DC-DC 컨버터 개발을 위한 최적화 연구 결과를 발표한다. 자율주행차량의 주 전력시스템이 차단되었을 때 차량을 제어하는 시스템에 전력공급이 가능한 비상발전시스템은 현재 개발되지 않은 상태이다. 자율주행차량의 비상발전시스템의 최대 전력은 약 3kW이며 main battery 전압은 48V, sub battery 전압은 12V이다. 본 연구에서는 차량의 연비를 고려한 고전력 밀도와 배터리 수명을 고려한 전류 리플 최소화를 목표로 한다. 이를 위해 차동모드 커플더 인덕터를 가진 4상 인터리브드 방식으로 설계하였고, 최대 98.22%의 효율이 예상된다.