• Journal of the Korean Regional Science Association
• /
• v.36 no.2
• /
• pp.37-49
• /
• 2020

Currently, the average aging rate has reached 14.8% in our country, despite the residents are aging or over the average aging rate has reached 31.8% with a population of less than 100,000. Various convenience facilities are concentrated in the town center, causing inconvenience to use. The main purpose of this study is to analyze the accessability of living convenience facilities in this area. This study builds on the population aging of the research target area and distribution of living facilities for the elderly based on MDIS data of the regional survey of the National Agriculture, Forestry and Fishing Survey of the National Statistical Office, and QGIS was used to visualize the status of the elderly, distribution of convenience facilities for the elderly, hot spot maps, and distance analysis, and also technical statistical analysis was conducted. As a result of the analysis, it was confirmed that the distribution and distance of living convenience facilities for the elderly in the area where the elderly lived a lot was located in a location that caused severe inconvenience to the use of the elderly. This suggests the necessity of the change facilities type and spatial reorganization by raising the need for space policy changes on the spatial distribution of elderly convenience facilities, reflecting the serious aging of small towns such as the study area.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.351-351
• /
• 2011

최근 지구온난화와 더불어 이상기후가 대두됨에 따라 기상 예측이 더욱더 중요시되고 있다. 또한 이전부터 가뭄 및 홍수와 같은 기상현상으로 인한 피해 사례가 빈번하였으며, 이로 인하여 물 관리의 어려움을 겪고 있다. 한 예로 이상기후가 유난히 잦았던 2010년 여름철 경우 평년보다 발달한 북태평양고기압의 영향으로 여름철 92일 가운데 81일의 전국 평균기온이 평년보다 높게 나타났다. 또한 강우 일수가 평년에 비해 7.4일 많은 44.2일을 기록하였으며, 국지성 집중호우 사례가 빈번하였다. 또한 8월 9일 발생한 태풍 `뎬무'를 포함해서 한 달 동안 3개의 태풍이 한반도에 영향을 끼치는 이례적인 사례가 발생하였다. 따라서 본 연구는 이러한 기상재해에 따른 물 관리를 장기적으로 대비하고자 고해상도 전지구 모델 GME를 이용하여 2010년 여름철 강수 예측을 실시하였다. 강수 예측에 사용된 전지구 모델 GME는 기존의 카테시안 격자체계를 가진 모델과 달리 전구를 삼각형으로 구성된 20면체로 격자화 한 Icosahedral-hexagonal grid 격자체계로 구성되어 있어, 해상도 증가에 용이할 뿐만 아니라, HPC(High Performance Computing)환경에서 효율성이 높은 장점을 가지고 있다. 본 계절 예측을 수행함에 있어 발생하는 잡음을 최소화하고자, Time-lag 기법을 이용하여 5개의 앙상블 멤버로 구성되어있으며, 이를 비교 분석하기위해 Climatology를 이용하여 총 10개의 앙상블 멤버로 규준실험을 수행하였다. 선행 연구에 따르면 1개월 이상의 장기 적분의 경우 초기조건보다 외부 강제력이 더 중요한 역할을 한다고 연구된 바 있다. (Yang et al., 1998) 특히 계절 변동성의 경우 대기-해양간의 상호작용에 의해 지배되며, 이를 고려하여 본 연구는 해수면 온도를 경계 자료로 사용하여 계절 예측을 수행하였다. 앞서 말한 실험 계획을 바탕으로 하여 나온 결과를 통해 동아시아지역 및 한반도 도별 강수 및 온도 변수에 대해 순별 및 월별 카테고리맵 분석을 실시하여 한눈에 보기 쉽게 나타냈다. 또한 주요 도시별 강수량 및 온도의 시계열 분석을 실시하여 시간이 지남에 따라 나타나는 변동성을 확인하였다. 계절 예측 결과에서 온도의 경우 평년보다 높게 나타났으며, 이는 실제 온도 예측과도 유사한 패턴을 가졌다, 강수의 경우 7월부터 8월 중순까지 평년보다 다소 적게 모의되었으며, 8월 하순경 회복하는 것으로 예측하였다. 따라서 본 계절 강수 예측은 다소 역학 모델이 가지는 한계를 가지고 있으나, 실제와 비교하여 어느 정도의 경향성이나 패턴에 있어 유사성을 보임을 확인하였으며, 이를 장기적 차원의 물관리를 함에 있어 참고 및 활용 가능할 것으로 예상한다.

• Journal of the Korea Society of Computer and Information
• /
• v.13 no.6
• /
• pp.13-24
• /
• 2008

The multi robot operation technique has emerged as one of the most important research subjects that focus on minimizing redundancy in space exploration and maximizing the efficiency of operation. For an efficient operation of the multi robot systems, the movement of each Single robot in the multi robot systems should be properly observed and controlled. This paper suggests Multi Robot Management System to minimize redundancy in space exploration by assigning exploration space to each robot efficiently to take advantage of the RFID. Also, this paper has suggested fault tolerance technique that detects disable Single robot and substitute it by activated Single robot in order to ensure overall exploration and improve efficiency of exploration. Proposed system overcomes previous fault that it is difficult for central server to detect exact position of robot by using RFID system and Home Robot. Designated Home robot manages each Single robot efficiently and assigns the best suited space to Single robot by using RFID Tag Information. Proposed multi robot management system uses RFID for space assignment, Localization and Mapping efficiently and not only maximizes the efficiency of operation, but also ensures reliability by supporting fault-tolerance, compared with Single robot system. Also, through simulation, this paper proves efficiency of spending time and redundancy rates between multi robot management applied by proposed system and not applied by proposed system.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2012.05a
• /
• pp.52-52
• /
• 2012

최근 선진국을 중심으로 제조기술의 산업혁명이라고 불릴 정도로 큰 파급효과가 기대되는 자기조립기반의 산업공정기술을 확보하기 위한 많은 노력과 연구들이 활발하게 진행되고 있다. 자기조립(Self-Assembly) 현상은 자연에서 일어나는 자발적인 힘으로 원자 또는 분자 단위까지 구조물을 제어하고 bottom-up 방식(상향식: 원자/분자 스케일의 나노구조를 배열/조립하여 원하는 형태의 패턴을 만들어 내는 방식)으로 원하는 구조물을 설계/제작할 수 있는 능력을 가지고 있다. 기초적인 과학으로부터 출발한 자기조립기술은 최근 자기조립 응용개발에서 많은 성과를 이루어내면서 산업화 가능성을 크게 하고, 과학계와 산업계의 많은 관심을 불러일으키고 있다. 반도체 산업기술을 예측하는 ITRS 로드맵(2005년)에 의하면 directed self-assembly 방법이 새로운 미래 패터닝 기술로 개발되어 2016년경에 사용되고, 자기조립소재로 제작된 다양한 응용소자들은 새로운 미래소자로 개발될 것으로 예상하고 있다. 이에 맞추어 국내 기업들도 diblock copolymer를 이용한 나노패터닝 기술 확보를 위한 연구를 진행하고 있다. 또한 IBM은 자기조립기술을 반도체공정에 실험적으로 적용하여 자기조립기술이 생산 공정에 부분적으로 적용될 가능성이 크다는 것을 보여주었다. 산업계와 함께 학계의 연구센터에서는 산업화를 위한 자기조립 집적화 공정(Integrated process) 개발을 이루기 위하여 체계적으로 연구를 실시하고 있다. 미국의 Northeastern 대학의 CHN(Center for high-rate Nanomanufacturing) 연구센터는 자기조립 집적화에 용이한 새로운 개념의 소자를 제안하고 이를 집적화하기 위한 다양한 공정을 개발하고 있으며, Wisconsin 대학의 NSEC(Nanosacle Science and Engineering Center) 연구센터는 diblock copolymer를 이용한 나노패터닝 기술 개발에서 획기적인 결과를 도출하여 산업계에 적용될 가능성을 높이고 있다. 이와 같은 결과들로부터 앞으로의 자기조립기술에 대한 연구는 3차원 구조물을 제작할 수 있는 집적화 공정에 집중될 것이고, 이를 위하여 새로운 개념의 단순한 구조의 응용소자개발도 함께 추진될 것으로 판단된다. 또한 실용 가능성이 큰 집적화 공정으로 개발하기 위하여 기존의 top-down 방식을 접목한 bottom-up 방식의 자기조립 집적화 공정이 개발될 것으로 예상하고 있다. 이와 함께 자기조립공정은 반복되는 구조를 쉽게 제작할 수 있는 장점을 가지고 있어 다양한 응용소자 [태양전지(solar cell), 연료전지(fuel cell), 유연성 있는 전자기기(flexible electronics), 화면표시 장치(display device)] 제작에 쉽게 이용되어 새로운 산업을 창출할 수 있는 가능성을 보이고 있다. 본 자기조립 연구 센터에서는 이와 같은 자기조립 특성을 제조공정에 적용하여 혁신적인 제조공정기술을 확보하고자 연구를 진행하고 있다. 그러므로 본 발표에서 이와 같은 연구 흐름과 함께 본 센터에서 진행하고 있는 자기조립 제조방법을 소개하고자 한다. 이와 함께 자기조립방법을 이용하여 제작된 다양한 응용소자 개발 결과를 발표하고, 이를 top-down 방식과 접목하여 집적화공정으로 개발하는 전략을 함께 소개하고자 한다.

• Communications of Mathematical Education
• /
• v.34 no.3
• /
• pp.299-324
• /
• 2020

The purpose of this study was to identify high school students' mathematics learning style and its characteristics according to their personality disposition types and to propose mathematics learning strategies fit into each personality disposition type. For this purpose, MBTI personality test and survey to find mathematics learning style for 375 high school students were executed. The results were as follows. First, many students highly evaluated the effects of private education and prefer reference book to textbook. Second, there were significant differences on following variable domains of mathematics learning style such as learning attitude, learning habit(concentrativeness to concept understanding), problem solving strategies(effort for problem comprehension, use of various strategies), self management(metacognition) by MBTI personality disposition types(SJ, SP, NT, NF groups). Third, based on the results, the following mathematics learning strategies fit into each personality disposition type were recommended. SJ type students are needed to effort creative approach for open problem and to use mindmap as mathematics learning strategy. SP type students are needed to fulfill stepwise problem solving process and to effort constantly practice long/short term learning objectives. NT type students are needed to expand opportunity to study with friends and to use SRN(self reflection note) or mathematics journal writings as mathematics learning strategy. NF type students are needed to use mathematics learning note writing activity which include logical basis for each step of problem solving and to invest more time on learning algebra which need meticulous calculation.

• Korean Journal of Remote Sensing
• /
• v.38 no.6_2
• /
• pp.1709-1722
• /
• 2022

The rise in temperature induced by global warming caused in El Nino and La Nina, and abnormally changed the temperature of seawater. Rainfall concentrates in some locations due to abnormal variations in seawater temperature, causing frequent abnormal floods. It is important to rapidly detect flooded regions to recover and prevent human and property damage caused by floods. This is possible with synthetic aperture radar. This study aims to generate a model that directly derives flood-damaged areas by using modified U-NET and TerraSAR-X images based on Multi Kernel to reduce the effect of speckle noise through various characteristic map extraction and using two images before and after flooding as input data. To that purpose, two synthetic aperture radar (SAR) images were preprocessed to generate the model's input data, which was then applied to the modified U-NET structure to train the flood detection deep learning model. Through this method, the flood area could be detected at a high level with an average F1 score value of 0.966. This result is expected to contribute to the rapid recovery of flood-stricken areas and the derivation of flood-prevention measures.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.22 no.3
• /
• pp.1-19
• /
• 2023

Bikes have recently emerged as an alternative to carbon neutrality. To understand the demand for public bikes, we endeavored to estimate travel frequency of public bike by considering the intermediate stops. Using the GPS trajectory data of 'Ttareungyi', a public bike service in Seoul, we identified a stay point and estimated travel frequency reflecting population, land use, and physical characteristics. Application of map matching and a stay point detection algorithm revealed that stay point appeared in about 12.1% of the total trips. Compared to a trip without stay point, the trip with stay point has a longer average travel distance and travel time and a higher occurrence rate during off-peak hours. According to visualization analysis, the stay points are mainly found in parks, leisure facilities, and business facilities. To consider the stay point, the unit of analysis was set as a hexagonal grid rather than the existing rental station base. Travel frequency considering the stay point were analyzed using the Zero-Inflated Negative Binomial (ZINB) model. Results of our analysis revealed that the travel frequency were higher in bike infrastructure where the safety of bike users was secured, such as 'Bikepath' and 'Bike and pedestrian path'. Also, public bikes play a role as first & last mile means of access to public transportation. The measure of travel frequency was also observed to increase in life and employment centers. Considering the results of this analysis, securing safety facilities and space for users should be given priority when planning any additional expansion of bike infrastructure. Moreover, there is a necessity to establish a plan to supply bike infrastructure facilities linked to public transportation, especially the subway.

• Journal of the Korea Computer Graphics Society
• /
• v.29 no.5
• /
• pp.21-30
• /
• 2023

Accurate segmentation of the kidney tumor is necessary to identify shape, location and safety margin of tumor in abdominal CT images for surgical planning before renal partial nephrectomy. However, kidney tumor segmentation is challenging task due to the various sizes and locations of the tumor for each patient and signal intensity similarity to surrounding organs such as intestine and spleen. In this paper, we propose a semi-supervised learning-based mean teacher network that utilizes both labeled and unlabeled data using a kidney local guided map including kidney local information to segment small-sized kidney tumors occurring at various locations in the kidney, and analyze the performance according to the kidney tumor size. As a result of the study, the proposed method showed an F1-score of 75.24% by considering local information of the kidney using a kidney local guide map to locate the tumor existing around the kidney. In particular, under-segmentation of small-sized tumors which are difficult to segment was improved, and showed a 13.9%p higher F1-score even though it used a smaller amount of labeled data than nnU-Net.

• Information Systems Review
• /
• v.19 no.2
• /
• pp.115-136
• /
• 2017

Online communities have become substantial aspects of people's daily lives. However, only a few communities succeed and attract the majority of users, whereas the vast majority struggle for survival. When various communities coexist, important factors should be identified and examined to maintain attraction and achieve success. The concept of coexistence as been extensively explored in organizational ecology literature. However, given the similarities and differences between online communities and traditional organizations, the direct application of organizational theories to online contexts should be cautiously explored. In this study, we follow the roadmap proposed by Davis et al. (2007) in conducting agent-based modeling and simulation study to develop a novel theory based on the previous literature. In the case of two coexisting communities, we find that community size and participation costs can significantly affect the development of a community. A large community can attract a high number of active members who frequently log in. By contrast, low participation costs can encourage the reading and posting behaviors of members. We also observe the important influence of the distribution of interests on the topic trends of communities. A community composed of a population that focuses on only one topic can quickly converge on the topic regardless of whether the initial topic is broad or focused. This simulation model provides theoretical implications to literature and practical guidance to operators of online communities.

• Journal of the Korean Society of International Agriculture
• /
• v.31 no.1
• /
• pp.8-16
• /
• 2019

Alternatives for increasing the competitiveness of locally manufactured agricultural machinery in domestic and foreign markets has been proposed. This was done by analyzing the major agricultural machinery's price and market share as well as their performance and quality. In the Korean domestic market, the market share of Japanese agricultural machinery has been identified to be 14.5% for tractors, 31.1% for combine harvesters, and 35.8% for rice transplanters, and on track for further increase. Japanese manufacturers' domestic patent shares are 58.5% for tractors, 79.9% for combine harvesters, and 69.8% for rice transplanters, showing the dire need for Korean domestic firms to expand their technological rights. To strengthen the industrial competitiveness of agricultural machinery, therefore, researches that develop the fundamental and elemental technology to reduce the frequency of breakdown should be needed in the short term. To achieve this, it is imperative to establish technology roadmap, promote greater cooperation between academia and industry, and systematically increase research funding. In addition, as a long-term solution for enhancing the competitiveness, an establishment of Agricultural Equipment Technology Institute is strongly recommended to systematically support R&D for developing core technologies, particularly high-quality components that guarantee durability and quality.